Coriant 8600 User manual

8600 Smart Routers
8665 Smart Router FP7.0
Reference Manual
76.8670-40128B
14.12.2015

Document Information
Revision History
Document
No.
Date Description of Changes
76.8670-
40128B
14.12.2015 - Cautionary note regarding cable connections added to ch.
2.3.4 Timing Block,2.5.3 Console Port,and2.5.4 External Alarm
Interface.
- Restriction regarding maximum current usage added as a footnote to
‘Power input specification’ row in ch. 6.1 8665 Smart Router Technical
Specifications.
76.8670-
40128A
25.05.2015 Initial release of the document for 8665 Smart Router FP7.0.
This revision of the manual documents the following network element and the corresponding
feature pack or higher.
8665 Smart Router FP7.0
If a different feature pack of 8600 products, please refer to the relevant product document
program on the Tellabs and Coriant Portal by navigating to www.portal.tellabs.com > Product
Documentation > Data Networking > Tellabs 8600 Smart Routers > Technical Documentation.
© 2015 Coriant. All rights reserved.
This manual is protected by U.S. and international copyright laws, conventions and treaties. Your right to use this manual is
subject to limitations and restrictions imposed by applicable licenses and copyright laws. Unauthorized reproduction, modification,
distribution, display or other use of this manual may result in criminal and civil penalties.
The specifications and information regarding the products in this manual are subject to change without notice. All statements,
information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind,
express or implied. Users must take full responsibility for their application of any products.
Adobe®Reader®are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
2

Document Information
Terms and Abbreviations
Term Explanation
ASIC Application Specific Integrated Circuit
BFD Bidirectional Forwarding Detection
BGP-4 Border Gateway Protocol version 4
BMP Broadband Management Protocol. A communication protocol which is used between
8600 network elements and 8000 network manager.
BSC Base Station Controller
CAC Connection Admission Control
CCN Configuration Change Notification
CDC Control and DC Power Card
CES Circuit Emulation Service
CLI Command Line Interface
Control card The control card in the 8600 system consists of a Control and DC Power Card CDC
(used in 8630 Smart Router and 8660 Smart Router), Switching and Control Module
SCM (used in 8611 Smart Router). In 8000 Intelligent Network Manager and CLI
referred to as unit.
CPU Central Processor Unit
CSMA/CD Carrier Sense Multiple Access/Collision Detect
CU Control functionality (used in 8615 Smart Router and 8665 Smart Router)
ECMP Equal Cost Multi Path routing
EEPROM Electrically Erasable Programmable Read Only Memory
EMC Electromagnetic Compatibility
EMI ElectroMagnetic Interference
ERM Electromagnetic Compatibility and Radiospectrum Matters
ESMC Ethernet Synchronization Message Channel
Fan One fan in a fan module
Fan Module A module consisting of two or more fans, the mechanics and possibly the control
electronics
FIFO First In First Out memory
FLASH Electrically erasable and programmable memory type
FMC Fixed mobile convergence
FTP File Transfer Protocol
FTP Foil Shielded Twisted Pair
GND Ground
GUI Graphical User Interface
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
3

Document Information
I2C Bidirectional two-wire serial bus that provides a communication link between
integrated circuits (ICs).
IEEE Institute of Electrical and Electronics Engineers
IP Internet Protocol
IRB Integrated Routing and Bridging
IS-IS Intermediate System to Intermediate System (Interior Gateway Protocol)
I-TEMP Industrial Temperature Range
ITU-T International Telecommunication Union - Telecom Standardization Sector
LDP Label Distribution Protocol
LED Light-Emitting Diode
LER Label Edge Router
Line card The line card in the 8600 system consists of an Ethernet Line Card (ELC1), Interface
Module Concentrator (IFC) and up to two Interface Modules (IFMs) (used in 8630
Smart Router and 8660 Smart Router). In 8000 Intelligent Network Manager and
CLI referred to as unit.
Line unit The line unit in the 8665 Smart Router is the basic building block for the element.
One line unit contains always the traffic functionality (LU) and, optionally control
functionality (CU).
LU Traffic functionality (used in 8615 Smart Router and 8665 Smart Router).
LU1 Line Unit in 8665 Smart Router.
LSP Label Switched Path
LSR Label Switch Router
LTE Long Term Evolution
MAC Media Access Control Sublayer of Data Link Layer
MP-BGP Multiprotocol Border Gateway Protocol
MPLS Multiprotocol Label Switching
MTU Maximum Transfer/Transmission Unit
NE Network Element
NEBS Network Equipment Building Systems
NRTL Nationally Recognized Testing Laboratory
OAM Operation, Administration and Maintenance
OSPF Open Shortest Path First
OSS Operating Support System
PCML Pseudo Current Mode Logic
PFC Power Factor Correction Circuit
PHY Physical Layer Device
PIM Power Input Module
PLL Phase Locked Loop
PPP Point-to-Point Protocol
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
4

Document Information
PPS Pulse-per-Second
PSN Packet Switch Network
PSU Power Supply Unit
PWE3 Pseudowire Edge to Edge Emulation
PWM Pulse Width Modulation
QoS Quality of Service. A way of guaranteeing a defined performance through the
network. Implementation of QoS in the network means specific bandwidth, latency,
jitter and loss guarantees per each trafficflow.
RAN Radio Access Network
RFC Request For Comments
RIB Routing Information Base
RISC Reduced Instruction Set Computer
RNC Radio Network Controller
RSVP-TE Resource Reservation Protocol – Traffic Engineering
RTC Real Time Clock
SCI Station Clock Input
SCO Station Clock Output
SDH Synchronous Digital Hierarchy
SDRAM Synchronous Dynamic Random Access Memory
SEC Synchronous Equipment Clock
SFP Small Form-Factor Pluggable. A transceiver type used in 8600 IFMs.
SM Single Mode
SNMP Simple Network Management Protocol
SONET Synchronous Optical Network
SSM Synchronization Status Messages
STM Synchronous Transfer Mode
STP Shielded Twisted Pair
SU1 Switch Unit in 8665 Smart Router
VCCV Virtual Circuit Connectivity Verification
VLAN Virtual LAN (Local Area Network)
VPN Virtual Private Network
VRF VPN Routing and Forwarding Table
VRRP Virtual Router Redundancy Protocol
VSI Virtual Switching Instances
WFQ Weighted Fair Queueing
WiMAX Worldwide Interoperability for Microwave Access
WRED Weighted Random Early Detection
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
5

Document Information
XFP 10-Gigabit Small Form-Factor Pluggable. A transceiver type used in 8600 ELC1
line card.
Compliance Statement
Hereby, Coriant Oy declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC and Directive 2011/65/EU.
FCC Notification Statement
Federal Communications Commission (FCC) Rules require that you be notified of the following:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Coriant Operations, Inc., in writing can void
the user’s authority to operate the equipment.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
6

Table of Contents
Table of Contents
About This Manual ............................................................................................................ 10
Objectives....................................................................................................................................................................... 10
Audience......................................................................................................................................................................... 10
8600 Smart Routers Technical Documentation.............................................................................................................. 10
Document Conventions .................................................................................................................................................. 13
Documentation Feedback ............................................................................................................................................... 13
8600 Smart Routers Discontinued Products ..................................................................14
Safety Notes ......................................................................................................................15
Intended Purpose ............................................................................................................................................................ 15
Class 1 Laser Product..................................................................................................................................................... 15
Jewelry Removal ............................................................................................................................................................ 16
Installation and Maintenance ......................................................................................................................................... 16
Lightning Activity .......................................................................................................................................................... 18
1 8665 Smart Router Overview......................................................................................19
1.1 Subrack ................................................................................................................................................................ 19
1.1.1 Backplane ............................................................................................................................................ 20
1.1.2 Unit Slots ............................................................................................................................................. 21
1.1.3 Cooling ................................................................................................................................................ 23
1.2 8665 Smart Router Powering .............................................................................................................................. 25
1.3 8665 Smart Router Power Consumption ............................................................................................................. 26
1.4 Synchronization ................................................................................................................................................... 27
1.5 8665 Smart Router Redundancy.......................................................................................................................... 27
1.5.1 Control Redundancy ............................................................................................................................ 27
1.5.2 Line Unit Redundancy......................................................................................................................... 28
1.5.3 Switch Unit Redundancy ..................................................................................................................... 28
1.5.4 Redundancy Terminology.................................................................................................................... 28
2 Line Unit (LU1).............................................................................................................29
2.1 Overview ............................................................................................................................................................. 29
2.2 Main Features ...................................................................................................................................................... 29
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
7

Table of Contents
2.3 Operation ............................................................................................................................................................. 30
2.3.1 CPU Subsystem ................................................................................................................................... 30
2.3.2 NPU Subsystem................................................................................................................................... 31
2.3.3 FPGA Subsystem................................................................................................................................. 31
2.3.4 Timing Block ....................................................................................................................................... 31
2.3.5 Backplane Data Links.......................................................................................................................... 33
2.3.6 Power Supply....................................................................................................................................... 33
2.3.7 Test Features ........................................................................................................................................ 33
2.4 Interfaces ............................................................................................................................................................. 34
2.5 Front Panel........................................................................................................................................................... 35
2.5.1 CFP2, SFP+ and SFP Transceivers ..................................................................................................... 35
2.5.2 USB Port.............................................................................................................................................. 36
2.5.3 Console Port ........................................................................................................................................ 36
2.5.4 External Alarm Interface ..................................................................................................................... 37
2.6 LU1 LEDs............................................................................................................................................................ 38
2.6.1 LU1 Status LEDs................................................................................................................................. 38
2.6.2 LU1 Ethernet LEDs ............................................................................................................................. 38
2.7 Cabling................................................................................................................................................................. 39
2.8 Laser Safety ......................................................................................................................................................... 39
2.9 LU1 Cooling ........................................................................................................................................................ 39
3 Switch Unit (SU1) ........................................................................................................40
3.1 Overview ............................................................................................................................................................. 40
3.2 Main Features ...................................................................................................................................................... 40
3.3 Operation ............................................................................................................................................................. 40
3.3.1 CPU Subsystem ................................................................................................................................... 41
3.3.2 FPGA Subsystem................................................................................................................................. 42
3.3.3 Control Ethernet Switch ...................................................................................................................... 42
3.3.4 Backplane Data Links.......................................................................................................................... 42
3.3.5 Power Supply....................................................................................................................................... 42
3.3.6 Test Features ........................................................................................................................................ 42
3.4 Front Panel........................................................................................................................................................... 43
3.4.1 SU1 Status LEDs ................................................................................................................................. 43
4 Power Input Module ....................................................................................................45
4.1 Overview ............................................................................................................................................................. 45
4.2 Operation ............................................................................................................................................................. 45
4.3 Front Panel and Connectors................................................................................................................................. 46
4.4 Input Fault Detection and LEDS ........................................................................................................................ 46
4.5 Cabling................................................................................................................................................................. 46
5 Pluggable Transceivers ..............................................................................................47
6 Technical Specifications.............................................................................................48
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
8

Table of Contents
6.1 8665 Smart Router Technical Specifications....................................................................................................... 48
6.2 LU1 Technical Specifications.............................................................................................................................. 52
6.3 SU1 Technical Specifications .............................................................................................................................. 52
6.4 8665 Smart Router DC48 Power Input Module Technical Specifications .......................................................... 53
6.5 8665 Smart Router Fan Module Technical Specifications .................................................................................. 53
6.6 Timing Block Technical Specifications ............................................................................................................... 53
End of Life Treatment .......................................................................................................55
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
9

About This Manual
About This Manual
This section discusses the objectives and intended audience of this manual, 8665 Smart Router
Reference Manual and consists of the following sections:
• Objectives
• Audience
• 8600 Smart Routers Technical Documentation
• Document Conventions
• Documentation Feedback
Objectives
The goal is to describe the network element features of 8665 Smart Router.
Audience
This manual is intended for system specialists and personnel involved in network planning.
8600 Smart Routers Technical Documentation
The document numbering scheme consists of the document ID, indicated by numbers, and the
document revision, indicated by a letter. The references in the Related Documentation table below
are generic and include only the document ID. To make sure the references point to the latest
available document versions, please refer to the relevant product document program on the Tellabs
and Coriant Portal by navigating to www.portal.tellabs.com > Product Documentation & Software
> Data Networking > 8600 Smart Routers > Technical Documentation.
Document Title Description
8600 Smart Routers
ATMandTDMConfiguration Guide
(76.8600-50110)
Provides an overview of 8600 NEs PWE3 applications,
including types, Single-Segment and Multi-Segment; PWE3
Redundancy; ATM applications, including PWE3 tunnelling,
Traffic Management, Fault Management OAM, protection and
TDM applications as well as instructions on how to configure
them with CLI.
8600 Smart Routers
Boot and Mini-Applications
Embedded Software Release Notes
(76.8600-50108)
Provides information related to the boot and mini-applications
software of 8605 Smart Router, 8607 Smart Router, 8609
Smart Router, 8611 Smart Router, 8620 Smart Router, 8630
Smart Router and 8660 Smart Router as well as the installation
instructions.
8600 Smart Routers
CLI Commands Manual
(76.8600-50117)
Provides commands available to configure, monitor and maintain
8600 system with CLI.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
10

About This Manual
Document Title Description
8600 Smart Routers
Embedded Software Release Notes
8600 Smart Routers SR7.0 Embedded Software Release Notes
(76.8670-50177) for the following products:
• 8602 Smart Router FP7.0
• 8609 Smart Router and 8611 Smart Router FP7.0
• 8615 Smart Router FP7.0
• 8630 Smart Router and 8660 Smart Router FP7.0
• 8665 Smart Router FP7.0
8600 Smart Routers
Equipment Management
Configuration Guide
(76.8600-50118)
Provides an overview of 8600 system HW inventory, software
management, equipment protection 1+1 (CDC and SCM) as well
as instructions on how to configure them with CLI.
8600 Smart Routers
Ethernet Configuration Guide (76.
8600-50133)
Provides an overview of 8600 system Ethernet applications,
including interfaces; Ethernet forwarding (MAC Switching,
Ethernet PWE3, IRB, VLAN, VPLS); Ethernet OAM; LAG;
ELP as well as instructions on how to configure them with CLI.
8600 Smart Routers Smart Routers
Fault Management Configuration
Guide (76.8600-50115)
Provides an overview of 8600 system fault management,
including fault source, types and status as well as instructions on
how to configure it with CLI.
8600 Smart Routers
Frame Relay Configuration Guide
(76.8600-50120)
Provides an overview of 8600 system Frame Relay applications,
including interfaces; Performance Monitoring; protection; Traffic
Management as well as instructions on how to configure them
with CLI.
8600 Smart Routers
Hardware Installation Guide
(76.8600-40039)
Provides guidance on mechanical installation, cooling,
grounding, powering, cabling, maintenance, commissioning and
ESW downloading.
8600 Smart Routers
Interface Configuration Guides
The Interface Configuration Guides provides an overview of the
8600 NEs interface functions, including NE supported interface
types and equipping; interface features; configuration options and
operating modes; fault management; performance monitoring;
interface configuration layers and port protocolsaswellas
instructions on how to configure them with CLI. The following
interface configuration guides are available:
• 8600 Smart Routers Network Interfaces Configuration
Guide (76.8600-50161) (for 8602 Smart Router, 8615 Smart
Router and 8665 Smart Router)
• 8609 Smart Router and 8611 Smart Router FP7.0 Interface
Configuration Guide (76.8670-50179)
• 8600 Smart Routers FP7.0 Interface Configuration Guide
(76.8670-50180) (for 8630 Smart Router and 8660 Smart
Router)
8600 Smart Routers
IP Forwarding and Traffic
Management Configuration Guide
(76.8600-50122)
Provides an overview of 8600 NEs IP, forwarding and traffic
management functionality, including: IP addressing; IP hosting
(ARP, DHCP); IP routing (static); ACL; Differentiated Services
(Policing, Queue Management, Shaping) as well as instructions
on how to configure them with CLI.
8600 Smart Routers
Management Communications
Configuration Guide
(76.8600-50125)
Provides an overview of 8600 system management
communications functions, including communication protocols:
BMP; FTP; RADIUS; SNMP; SSH; TELNET as well as
instructions for configuring them with CLI.
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
11

About This Manual
Document Title Description
8600 Smart Routers
Mobile Optimization Configuration
Guide (76.8600-50100)
Provides an overview of 8600 system Mobile Optimization
applications as well as instructions on how to configure them
with CLI.
8600 Smart Routers
MPLS Applications Configuration
Guide (76.8600-50123)
Provides an overview of 8600 NEs MPLS applications (including
FRR (one-to-one and facility backup); LDP; protection and
Traffic Engineering), MPLS-TP applications (including OAM,
linear protection), S-MPLS applications as well as instructions
on how to configure them with CLI.
8600 Smart Routers
Performance Counters Reference
Guide (76.8600-50143)
Provides an overview of 8600 system supported performance
counters.
8600 Smart Routers
Reference Manuals
The reference manuals describe the 8600 network element
features including:
• NE enclosure, baseboard, power supply modules, and
interfaces in 8602 Smart Router FP7.0 Reference Manual
(76.8670-40130)
• NE enclosure, baseboard, power supply modules, interfaces
and physical LM types in 8609 Smart Router FP7.0 Refer-
ence Manual
• NE enclosure, baseboard, power supply modules, SCMs, HM
and LM types in 8611 Smart Router FP7.0 Reference Manual
• NE enclosure, baseboard, power supply modules, and in-
terfaces in 8615 Smart Router FP7.0 Reference Manual
(76.8670-40132)
• NE subrack, fan modules, CDCs, line cards and IFMs in 8630
Smart Router FP7.0 Reference Manual
• NE subrack, fan modules, CDCs, line cards and IFMs in 8660
Smart Router FP7.0 Reference Manual
• NE subrack, fan modules, line unit and switch unit in 8665
Smart Router FP7.0 Reference Manual (76.8670-40128)
8600 Smart Routers
Routing Protocols Configuration
Guide (76.8600-50121)
Provides an overview of 8600 NEs routing protocols, including
BFD; BGP; BGP MP; ECMP; IS-IS; OSPF and VRRP as well as
instructions on how to configure them with CLI.
8600 Smart Routers
Scalability Reference Manual
(76.8600-50160)
Provide a summary of tested scalability limits of the 8600 Smart
Routers.
8600 Smart Routers
SNMP MIB Support
(76.8600-50116)
Describes SNMP MIB support by the 8600 NEs and provides
information on the supported objects and traps. For further
information on SNMP MIBs, see the related RFCs.
8600 Smart Routers
Statistic Counters Reference Guide
(76.8600-50142)
Provides an overview of 8600 system supported statistic counters.
8600 Smart Routers
Synchronization Configuration
Guide (76.8600-50114)
Provides an overview of 8600 NEs synchronization functionality,
including physical layer Frequency Synchronization (SEC, EEC);
PTP Frequency Synchronization; Phase-Time Synchronization
(L2 and L3 applications) as well as instructions on how to
configure them with CLI.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
12

About This Manual
Document Title Description
8600 Smart Routers
Test and Measurement Configuration
Guide (76.8600-50124)
Provides an overview of 8600 NEs measurement and connectivity
verification tools, including Ethernet loopback; IP ping and
traceroute; MAC swap loopback; MPLS ping and traceroute;
PLT; PWE3 loopback; VCCV (BFD, LSP ping) as well as
instructions on how to configure them with CLI.
8600 Smart Routers
VPNs Configuration Guide
(76.8600-50128)
Provides an overview of 8600 system virtual private network
(VPN) layer 3 applications as well as instructions on how to
configure them with CLI.
8000 Intelligent Network Manager
Online Help
Provides instructions on how different operations are performed
with the 8000 Intelligent Network Manager. Describes also
different parameters and controls of the 8000 Intelligent Network
Manager dialogs and windows.
Note that the Online Help is not available on the Portal but it is
incorporated in the 8000 Intelligent Network Manager.
Document Conventions
This is a note symbol. It emphasizes or supplements information in the document.
This is a caution symbol. It indicates that damage to equipment is possible if the instructions
are not followed.
This is a warning symbol. It indicates that bodily injury is possible if the instructions are not
followed.
Documentation Feedback
Please contact us to suggest improvements or to report errors in our documentation:
Email: fi[e-mail]
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
13

8600 Smart Routers Discontinued Products
8600 Smart Routers Discontinued Products
8600 Smart Routers Manufacture Discontinued (MD) notifications are available on the Tellabs
and Coriant Portal, www.portal.tellabs.com > Product Documentation & Software > Data
Networking > [8600 Smart Routers product name] > Product Notifications.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
14

Safety Notes
Safety Notes
This chapter lists safety notes and their translations for 8600 network elements.
Intended Purpose
The equipment shall be used only for its intended purpose.
Das Gerät soll nur für den vorgesehen Einsatzzweck verwendet werden.
CAUTION: Do not insert an RJ-11 (telephone) plug into Ethernet or E1/T1 ports. Equipment
damage may result.
ACHTUNG: Stecken Sie keine RJ-11 (Telefon) Stecker in die Ethernet oder E1/T1 Anschlüsse
da dieses zu einer Beschädigung des Gerätes führen kann.
CAUTION: Do not climb on or stand on the 8600 network element. Neither the network element
nor its enclosure is designed to support the weight of a person.
ACHTUNG: Steigen Sie oder stellen Sie sich nicht auf das 8600 Netzwerk Element. Weder
des Netzwerk Element noch das Gehäuse sind dafür ausgelegt worden das Gewicht einer
Person zu tragen.
Class 1 Laser Product
Class 1 laser product.
Laserprodukt der Klasse 1.
WARNING: No other types of lasers can be used than supplied and approved by Coriant. If
other types are used, the laser class and compliance to laser safety and EMC standards
must be checked.
WARNUNG: Verwenden Sie keine anderen als die von Coriant gelieferten und zugelassenen
Lasertypen. Falls Sie andere Typen verwenden, müssen die Laserklasse und die Einhaltung
von Lasersicherheits- undEMV-Normengeprüftwerden.
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
15

Safety Notes
WARNING: Install only lasers that have been demonstrated to meet Class 1 eye safe levels by
a Nationally recognized Authority such as The Food and Drug administration's 21CFR1040
Laser Energy Source, UL 60950-1 Information Technology equipment and European norms
EN60950-1, EN60825-1 and EN60825-2. Failure to use laser transceivers which meet these
standards could result in eye damage to users or service personnel working around the
equipment.
WARNUNG: Installieren Sie nur Laser der Klasse 1 die die Augenschutz Richtlinien
der staatlich anerkannten Organisationen wie z.B. The Food and Drug administration’s
21CFR1040 Laser Energy Source, UL 60950-1 Information Technology equipment oder die
Europa Normen EN60950-1, EN60825-1 und EN60825-2 erfüllen. Laser die diese Standards
nichterfüllenkönnenzuVerletzungenanAugendesBenutzersunddesServicePersonals
das in der Nähe der Geräte arbeitet führen.
WARNING: Optic operation should be verified by observing the status LEDs. Do not look into
the laser or fiber to verify operation.
WARNUNG: Überprüfen Sie die Funktionstüchtigkeit der Optischen Einheit anhand der Status
LED. Schauen Sie nie in den Laser oder die Glasfaser um die Funktion zu prüfen.
WARNING: Because invisible radiation may be emitted from the aperture of the port when no
fiber cable is connected, avoid exposure to radiation and do not stare into open apertures.
WARNUNG: Aus der Stecker Öffnung können unsichtbare Strahlen emittieren wenn kein
Glasfaserkabel angeschlossen ist. Vermeiden Sie es sich den Strahlungen auszusetzen und
starren Sie nicht in die Öffnungen.
Jewelry Removal
WARNING: Before working on equipment that is connected to power source, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when connected to
power and ground and can cause serious burns or weld the metal object to the terminals.
WARNUNG: Bevor Sie an Geräten arbeiten die an eine Spannungsversorgung angeschlossen
sind, entfernen Sie all Ihren Schmuck (einschließlich Ringe, Ketten und Uhren). Metallobjekte
erhitzen sich wenn sie einen Kurzschluss zwischen Spannungsversorgung und Masse/Erdung
verursachen. Dieses kann zu schweren Verbrennungen führen oder das Anschweißen an die
Anschlussklemmen zur Folge haben.
Installation and Maintenance
WARNING: This equipment is to be installed and maintained by qualified service personnel
only.
WARNUNG: Dieses Gerät darf nur von qualifiziertem Fach- oder Servicepersonal installiert
oder gewartet werden.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
16

Safety Notes
CAUTION: Electrical interfaces may require external protection devices to safeguard against
overvoltages, transients, earth potential differences and/or power cross-contacts.
ACHTUNG: Elektrische Anschlüsse benötigen evtl. externe Schutzschaltungen
um sie vor Überspannung, Einschaltspitzen, Erdpotentialunterschieden und/oder
Fremdspannungsüberlagerung zu schützen.
CAUTION: While handling the modules (Interface Modules, Line Modules, High Speed
Modules, SCM, CDC, Line Cards, Power Modules, Power Input Modules and Fan Modules) of
the 8600 network elements, always take care of proper handling, e.g. do not bend or twist
the modules, do not touch the components on the modules, take care of good ESD working
practices, do not use excessive force while inserting or removing the modules, do not drop
the modules.
ACHTUNG: Achten Sie darauf, dass Sie mit den Modulen (Schnittstellenmodulen,
Netzmodulen, Hochgeschwindigkeits-Netzmodulen, SCM, CDC, Netzkarten, Netzteilmodulen,
Netzeingangsmodulen und Lüftermodulen) der 8600-Netzwerkelemente sorgsam umgehen
und diese nicht verbiegen oder verdrehen. Berühren Sie nicht die Bauteile auf den Modulen.
Wenden Sie beim Ein- oder Ausbauen der Module keine übermäßige Kraft an und lassen Sie
die Module nicht fallen. Beachten Sie außerdem die Arbeitsrichtlinien im Zusammenhang
mit elektrostatischer Entladung.
WARNING: For US usage: this equipment must only be used with a Nationally Recognized
Testing Laboratory (NRTL) approved power supply.
WARNUNG: Für den Gebrauch in den USA: Dieses Gerät darf nur mit einer von einer national
anerkannten Test Einrichtung (NTRL) zugelassenen Spannungsversorgung betrieben werden.
WARNING: Read the installation instructions before you connect the system to its power
source.
WARNUNG: Lesen Sie die Installationsanweisungen bevor Sie das System an die
Spannungsversorgung anschließen.
WARNING: When installing or performing maintenance on the equipment, the ground
connection must always be made first. Never operate or maintain an ungrounded equipment.
WARNUNG: Bei der Installation oder bei Wartungsarbeiten am Gerät muss die Masse/Erdung
immer als erstes angeschlossen werden. Betreiben Sie oder arbeiten Sie niemals an einem
Gerät das nicht geerdet ist.
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
17

Safety Notes
Lightning Activity
WARNING: Do not work on the system or connect or disconnect cables during periods of
lightning activity.
WARNUNG: Arbeiten Sie während eines Gewitters mit Blitzschlag nicht an dem Gerät oder
schließen Sie auch keine Kabel an bzw. trennen Sie keine ab.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
18

1 8665 Smart Router Overview
1 8665 Smart Router Overview
8665 Smart Router is a cost efficient, 900 Gbp/s full duplex IP/MPLS router for pure packet
networks providing Ethernet interfaces from 1 to 100 Gbp/s. It is designed to be deployed in
medium-sized aggregation and large mobile macro sites as well as controller and S-GW sites in
technically advanced all-IP networks. It provides the flexibility and capabilities to serve all-IP
mobile and fixed networks including applications ranging from traditional consumer, enterprise and
machine-to-machine connectivity to cloud networking needs. It has the interface density, throughput
and cost effectiveness to meet the needs of fast growing data services while maintaining high
quality for low latency voice traffic.
1.1 Subrack
The 8665 Smart Router subrack can be installed into 600 mm deep 19” rack. The outer dimensions
ofthesubrackare445mm/17.51inx666mm/26.22inx445mm/17.51in(wxhxd),thewidth
with the integrated side adapter front flange is 483 mm/19.01 in.
The 8665 Smart Router is 15U high and designed for front to back airflow installations. The 8665
Smart Router subrack allows the subrack and backplane serial numbers to be read by the software
from an EEPROM device, thereby making them visible on 8000 Intelligent Network Manager and
CLI.
76.8670-40128B 8600 Smart Routers
© 2015 Coriant. 8665 Smart Router FP7.0 Reference Manual
19

1 8665 Smart Router Overview
Fig. 1 Equipped 8665 Smart Router Subrack
1.1.1 Backplane
8665 Smart Router uses a dual backplane architecture, which allows that all the cards are accessible
from the front panel. The backside of the subrack has a metal cover and all the interface connectors
are located on the front side. The signal backplane itself is passive and only provides connectors
and signal paths for high speed data packet transfer. Power distribution and low speed signaling
among the cards is handled by a separate backplane. The power backplane contains some passive
components for line termination, signal integrity purposes and the identification EEPROM.
The backplane data transmission architecture is based on differential signals in which the switch
cards are the center points for a dual star topology in a redundant configuration. There is also a
separate internal communication dual star bus topology between the units in the NE. This separate
control bus assures that the NE internal control is not lost even if the forwarding plane network
processors have problems. The other buses are power, synchronization (clock), fan module control
and unit presence busses.
8600 Smart Routers 76.8670-40128B
8665 Smart Router FP7.0 Reference Manual © 2015 Coriant.
20