Corintech FilesThruTheAir 21CFR User manual
WiFi Data Logging Sensor
Quick Start Guide
www.lesthrutheair.com
The sensor will arrive partly charged, but
for optimum performance you should
charge it for 24 hours before use. The sensor
will automatically start recharging when
connected to a PC or USB charger using the
USB cable provided.
The symbols below show the range of battery
states that your device may display.
Battery states
5 easy steps to get started with your FilesThruTheAir™ sensor
Charge your sensor1.
Solid with
bars
One bar
ashes
Bars
cycling
Battery OK/Charged Battery Low Battery Charging
5 easy steps to get started with your FilesThruTheAir™ sensor
Install or update the PC software
Update the sensor rmware
2.
3.
Run the 21CFR WiFi Sensor Software and
accept any rewall or security warnings.
Select Advanced Tools, then select Firmware
Updater. Follow the on-screen instructions to
update the rmware in your sensor.
You should always install the latest rmware
to ensure the device contains the latest
features.
Before the sensor can be set up, you must
install the software on your PC. To download,
visit www.lesthrutheair.com/support and
select the 21CFR Software Download link.
The sensor may already be displaying a
reading, but it will not be congured or
connected to your WiFi network until set up
is complete.
You should always install the latest PC
software to ensure you can connect with the
latest devices, access the most up-to-date
features and communicate eectively with
the Cloud.
Run the 21CFR WiFi Sensor Software. Your 21CFR WiFi Sensor, together with a
21CFR Professional Cloud account, will
provide controlled universal access to your
data, with advanced system audit functions
and restricted report generation through
user management and privileges.
Once signed-in, select Set-Up Device, and
follow the on-screen instructions to connect
your sensor.
Once sensors have been set-up, they
can be recongured remotely without
reconnecting using the USB cable.
Set-up the sensor4.
If you haven’t yet
signed-up for a
21CFR Professional
Cloud account, click
here to get started.
If you already have
a cloud account
sign-in here.
The symbols below show the range of signal
states that your device can display.
When placing the sensor, use the signal icon
to ensure the device remains within range of
the network, consider local heat sources and
radio obstructions when positioning your
device. A physical obstruction between the
router/access point and sensor will aect the
signal range. WiFi Extenders can be used to
increase the range of your network , these can
be purchased at www.lesthrutheair.com.
Positioning your sensor5.
Signal icon not displayed Signal icon ashes Signal icon solid
Sensor is not
set-up
Sensor is trying to
communicate
Sensor is
successfully
communicating
Signal states
21cfr.wifisensorcloud.com
Enjoy controlled universal accessibility
for your important data with the 21CFR
FilesThruTheAir™ Cloud.
With the 21CFR Professional
Cloud you can:
View data from multiple sensors across
multiple sites
Assign multiple users to access, view and
export data
Access data from any Internet
enabled device
Set up email alerts providing alarm and
status reports
Broadcast daily summary emails
Control access to your data and restrict
printing and exporting with user
privileges and approved signatories
What is Cloud based monitoring?
Step5
Sensor’s battery replacement
The rechargeable battery should only be replaced by an
authorised supplier.
Repairing or modifying
Never attempt to repair or modify FilesThruTheAir™
products. Dismantling FilesThruTheAir™ products,
including the removal of external screws, may cause
damage that is not covered under the warranty. Servicing
should only be provided by an authorised supplier. If the
FilesThruTheAir™ product has been submerged in water,
punctured, or seriously damaged do not use it and return
it to an authorised supplier.
Charging
Only use a USB Power Adaptor or a USB port to charge
FilesThruTheAir™ products. Read all safety instructions for
any third party products and accessories before use with
this product. We are not responsible for the operation of
any third party accessories or their compliance with safety
and regulatory standards. We do not recommend charging
the battery when the unit is at 40˚C (104˚F) or above. Some
of our products employ safety features to prevent this.
Using connectors and ports
Never force a connector into a port; check for obstruction
in the port, make sure that the connector matches the port
and that you have positioned the connector correctly in
relation to the port. If the connector and port do not join
with reasonable ease they probably do not match and
should not be used.
Disposal and recycling
You must dispose of FilesThruTheAir™ products according
to relevant laws and regulations. FilesThruTheAir™ products
contain electronic components and lithium polymer batteries
and therefore they must be disposed of separately from
household waste.
Important safety information
WARNING: Failure to follow these safety instructions could result in re, electrical shock, other injury or damage.
FilesThruTheAir™ is a trademark of Corintech Ltd.
www.lesthrutheair.com - +44 (0)1425 651111
Technical support
Use the button on the 21CFR WiFi Sensor Software home screen for more
information on how to set up your devices. You can also view Help Guides and other
support resources at www.lesthrutheair.com/support.
For additional technical support, you can contact 21cfr@lesthrutheair.com
or call +44 (0) 1425 651111.
This manual suits for next models
3
Table of contents
