Costway HW51784 User manual

DO NOT fully tighten all screws until assembly is completed
PART LIST FIGURE QUANTITY DESCRIPTION
A 1 PC RIGHT ARM
B 1 PC LEFT ARM
C 1 PC BACK
D 1 PC SEAT
E 6 + 1 PCS SHORT BOLT (M6*18)
F 2 + 1 PCS LONG BOLT (M6*40)
G 8 + 1 PCS FLAT WASHER
H 1 PC ALLEN WRENCH
I 2 PCS BACK CUSHION
J 1 PC SEAT CUSHION
Page
1/4
ITEM:HW51784
ASSEMBLE ON A FLAT, PROTECTED SURFACE.

STEP 1
A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C. ATTACH LEFT ARM (B) TO SEAT (D) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
STEP 2
A. TURN SEAT ASSEMBLY TO UPRIGHT POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A) AND LEFT ARM (B)
WITH FLAT WASHER (G) AND LONG BOLT (F) AND SHORT
BOLT (E) USING ALLEN WRENCH (H) AS SHOW. DO NOT
TIGHTEN COMPLETELY.
STEP 3
A. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH (H).
B. RETAIN ALLEN WRENCH (H) FOR USE TO TIGHTEN BOLTS
PERIODICALLY AS NEEDED.
STEP 4
A. PUT CUSHION (J) ON THE SEAT, THEN PUT ON THE BACK
CUSHIONS (I).
Page
2/4

PART LIST FIGURE QUANTITY DESCRIPTION
A 1 PC TABLE TOP
B 4 PCS LEG
C 1 PC LEG CONNECTOR
D 12 + 1 PCS BOLT（M6*28）
E 12 + 1 PCS FLAT WASHER
F 1 PC ALLEN WRENCH
Page
3/4

CARE AND CLEANING
IN ORDER TO PROLONG THE LIFE OF YOUR LOVESEAT AND TABLE, PLEASE STORE IN DRY SHELTERED PLACE WHEN NOT IN USE OR DURING
INCLEMENT WEATHER.
STEP 1
A. PLACE TABLE TOP (A) UPSIDE DOWN ON A FLAT,
PROTECTED SURFACE.
B. ATTACH LEGS (B) TO TABLE TOP (A) WITH FLAT
WASHER (E) AND BOLT (D) USING ALLEN WRENCH (F).
DO NOT TIGHTEN COMPLETELY.
STEP 2
A. ATTACH LEG CONNECTOR (C) TO LEG (B) WITH FLAT
WASHER (E) AND BOLT (D) USING ALLEN WRENCH (F).
DO NOT TIGHTEN COMPLETELY.
STEP 3
A. ROTATE TABLE TO UPRIGHT POSITION SO THAT IT
STANDS STABLE ON THE FLOOR.
B. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH
(F).
TIGHTEN LEG CONNECTOR (C) FIRST, THAN TIGHTEN LEG
(B) TO TABLE TOP (A).
C. KEEP ALLEN WRENCH (F) TO TIGHTEN ALL BOLTS
PERIODICALLY AS NEEDED.
Page
4/4