Costway GOPLUS SP37879 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
If you're having difficulty, our friendly
customer team is always here to help.
USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville
USA:[email protected]
AUS:[e-mail]
GBR:[e-mail]
FRA:[e-mail]
SP37879
Basketball Hoop Stand
Panier de Basket-Ball

Installation Alert:
*To save your time and ensure your safety, please read the
instructions carefully and check all the accessories in the package
before installing, weighing, displaying and disassembling the
basketball stand, master the installation steps and details before
starting to install.
* This product requires at least 2 adult to install, please prepare 2
adjustable wrenches.
*If there are any problems on the installation and use, please
contact our customer service at any time. We will help you in time
to reduce your trouble or damage to the product!
WARNING:
IMPROPER INSTALLATION
OR SWINGING ON THE RING
MAY CAUSE SERIOUS
INJURY OR DEATH
EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l’ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d’éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d’emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d’étouffement.
Avant de Commencer
EN
02 03

Parts list
Accessories
N
O
P
Q
R
S
T
W
X
Y
AA
BB
CC
DD
Name
Backboard
Base
M10*180MM Bolt
M10*180MM Bolt
M10*180MM Bolt
Short support rod
Long support rod
Top Pole
Middle Pole
Bottom Pole
Triangular fixed block
Lifting rod
Spring
Counterweight bag
Quantity
1
1
1
3
2
2
2
1
1
1
1
1
2
1
Notes
Connect Long support
rod andLifting rod
Connect Shortsupport
rod, Long support rod
and Top pole
Connect Shortsupport
rod, Long support rod
and Boardbracket
Accessories
A
B
C
D
E
F
F1
G
H
I
J
K
L
M
Name
M8*120MMSpring bolts
M8*40MM Bolt
M8*20MM Bolt
M8*16MM Bolt
M8*50MM Bolt
M10*80MMBolt
M8*80MM Bolt
M8*90MM Bolt
Pole Brace
Wheel
Wheel Shaft
Board Bracket
Ring
Net
Quantity
2
2
2
2
1
4
2
1
2
2
1
1
1
1
Parts list
Notes
Connect Ring,
Backboard and Board
Bracket
Connect Ring,
Backboardand Board
Bracket
Connect Base and Pole
Brace
Connect Backboard and
Board Bracket
Connect Triangularfixed
block and Lifting rod
Connect Top Pole,
MiddlePoleand Bottom
Pole
Connect Middle Pole and
Triangular fixed block
Connect Bottom Pole
andPoleBrace
04 05

B
D
A C
E F
M8*120MM M8*40MM M8*20MM
M8*16MM M8*50MM M10*80MM
F1 G H
I
L
J
M
K
M8*80MM M8*90MM
QP
CC
S T
AA
BB DD
W X
Y
R
M10*180MM M10*180MM M10*180MM
N O
06 07

K
A
B
L
N
K
D
K
3) Install the backboard:
As shown, please bend the board bracket (K) into a Y shape
before installation, Fix ring (L) and board bracket (K) on
backboard (N) by spring bolts (A) and bolts (B).
Then use bolts (D) to fix the top of board bracket (K) on the
back of board (N) tightly.
1) Install bottom pole, wheel shaft and wheel:
As shown, place the base (O) on a chosen playing ground,the
surface beneath the base should be horizontal. Insert the
wheel shaft (J) into wheel (I), base (O) and end of bottom pole
(Y) orderly.
2) Install bottom pole, base and base support:
As shown, fix one end of the pole braces (H) on bottom pole
(Y) by bolt (G). Then fix another end of the pole braces (H) on
base (O) by bolt (C).
I
Y
JI
J
Y
OO
C
H
Y
O
G
Y
O
08 09

B
A
A
B
4) Install short support rod and long support rod:
As shown, fix the short support rod (S) and long support rod
(T) with the board bracket (K) with bolts (R), and then fix the
short support rod (S) and long support rod (T) with the top pole
(W) with bolts (Q).
10 11

5)Install the long support rod, lifting rod and spring:
As shown, Fix the long support rod (T) and lifting rod (BB)
with screws (P). Then hook one end of the spring (CC) onto
any small hole of the Board Bracket (K), and then use a
2mm thick rope loop to cover the other end of the spring
(CC) and pull it towards the screw (Q) in the middle of the
short support rod (S).
AA
6) Mounting the base bracket:
As shown, fix top pole (W) and middle pole (X) together by 2
pcs of bolt (F), and then fix middle pole (X) and bottom pole
(Y) together by 2 pcs bolt (F). After that, fix the triangular
fixed block (AA) on the middle pipe (X) with bolts (F1), and
finally fix the lifting rod (BB) and triangular
block (AA) with bolt (E).
1
2
3
4
WXY Tube
connecting
mode
12 13

M
L
8) Install the ball net
If the product does not need to be moved frequently, we
recommend filling the base with sand instead of water.
Because water freezes below 0oC (32oF), it can damage the
base. Note, however, that the sand can not be poured out
after being loaded into the base. In order to be more stable,
it is recommended to place heavy objects in the
counterweight bag (DD) on the base.
Place the counterweight bag after filling with sand.
Sand
Cover cap
90% Water
7) Another installation procedure using height:
As shown, Fix top pole (W) and bottom pole (Y) together by
2 pcs of bolt (F).
After that, fix the triangular fixed block (AA) on the bottom
pole (Y) with screws (F1), and finally fix the lifting rod (BB)
and triangular fixed block (AA) with screw (E).
AA
1
2
3
DD
14 15

Alerte d'Installation :
* Pour gagner votre temps et assurer votre sécurité, veuillez lire
attentivement les instructions et vérifier tous les accessoires dans
le paquet avant d'installer, de peser, d'afficher et de démonter le
panier de basket-ball, veuillez maîtriser les étapes d'installation et
les détails avant de commencer à installer.
* Ce produit nécessite au moins 2 adultes pour l'installer, veuillez
préparer 2 clés à molette.
* Si vous rencontrez des problèmes lors de l'installation ou de
l'utilisation, veuillez contacter notre service clientèle à tout
moment. Nous vous aiderons à temps pour réduire les problèmes
ou les dommages au produit !
AVERTISSEMENT :
UNE MAUVAISE INSTALLATION
OU UN BALANCEMENT
SUR L'ANNEAU PEUT
PROVOQUER DES BLESSURES
GRAVES OU LA MORT.
FR
Accessoires
A
B
C
D
E
F
F1
G
H
I
J
K
L
M
Nom
Boulons à ressort M8*120MM
Boulon M8*40MM
Boulon M8*20MM
Boulon M8*16MM
Boulon M8*50MM
Boulon M10*80MM
Boulon M8*80MM
Boulon M8*90MM
Support de poteau
Roue
Arbre deroue
Support de panneau
Anneau
Filet
Quantité
2
2
2
2
1
4
2
1
2
2
1
1
1
1
Liste des Pièces
Remarques
Connecter l'anneau, le
panneau arrière et le
support de panneau
Connecter l'anneau, le
panneau arrière et le
support de panneau
Connecter la base et le
support de poteau
Connecter le panneau
arrière et le support de
panneau
Connecter le bloc de
fixation triangulaire et la
tige de levage
Connecter le poteau
supérieur, le poteau central
et le poteau inférieur
Connecter le poteau
central et le bloc de
fixation triangulaire
Connecter le poteau
inférieur et le support de
poteau
16 17

Liste des Pièces
Accessoires
N
O
P
Q
R
S
T
W
X
Y
AA
BB
CC
DD
Nom
Panneau arrière
Base
Boulon M10*180MM
Boulon M10*180MM
Boulon M10*180MM
Tige de support courte
Tige de support longue
Poteau supérieur
Poteau central
Poteau inférieur
Bloc de fixation triangulaire
Tige de levage
Ressort
Sacde contrepoids
Quantité
1
1
1
3
2
2
2
1
1
1
1
1
2
1
Remarques
Connecter la tige de
support longue et la tige
de levage
Connecter la tige de
support courte, la tige de
support longue et le
poteau supérieur
Connecter la tige de
support courte, la tige de
support longue et le
support de panneau
B
D
A C
E F
M8*120MM M8*40MM M8*20MM
M8*16MM M8*50MM M10*80MM
F1 G H
I
L
J
M
K
M8*80MM M8*90MM
18 19