
PRODUCT ASSEMBLY PRODUCT ASSEMBLY
the same with the one you set before
There is a built-in battery protection module,which can automatically monitor
consumption affects
4)
the car battery voltage. Before the battery power
the normal start of the car, the car fridge will automatically stop working and
the LCD screen display the "E1" code to ensure that the car battery will not be
Battery Protection Function
exhausted.
After restart, the temperature set will be
5) M FPower emory unction
11.7±0.3V
10.7±0.3V
10.2 ±0.3V
12.7±0.3V
11.7±0.3V
11.2±0.3V
24.6±0.3V
22.6±0.3V
21.6±0.3V
26.0±0.3V
24.0±0.3V
23.0±0.3V
<
-
<
-
-
<
-
-
-
Battery voltage
protection 12V cut out 12V cut in 24V cut out 24V cut in
Note: The voltage level is testing the voltage value of input terminal of the
compressor, not the output terminal of the car battery.
(LOW)
(MED)
(High)
the power failure.
▌
—
—
—
—
▌
—
—
—
▌
—
The refrigerator does not work
Check if the power supply is connected correctly (whether the plug is loose,
whether the positive and negative poles are connected incorrectly)
Check if the ventilation conditions are normal.
Check if the fuse is blown
Check if the power switch on the control panel is turned on.
Abnormal noise in the refrigerator
The car refrigerator is not placed evenly
Hit the wall or other items
internal parts loose or fall off
Condensation on the surface of the refrigerator
When the ambient humidity is >75%, the surface of the cabinet may be
slightly condensed. The higher the humidity, the greater the probability of
condensation , which is normal.
5、
1)
Different Error Situation & How To Fix
Error Situation
Part Name
DC power input(DC12/24V)
LCD display
+
<
>
<
-
°
C
MAX
—
Increase Decrease Set Power ON/OFF
-20
USB interface
1) ON/OFF
Press for 5seconds, car fridge will enter the stand by mode.
Note: After shutting down the car fridge and restarting, there are 3 minutes
delay for the compressor to start to work.
1)
Press
<
or
>
to set temperature that you want. After operation the light will flash
2) Temperature Set
for 5 seconds and display the temperature inside the fridge.
Note: The cabinet temperature in the fridge > the setting temperature(+3℃), and
turned on. When the cabinet temperature in the fridge =
the setting
temperature, compressor stops working.
3) Parameter Functions
℃: Celsius degree ℉: Fahrenheit degree
ECO: Energy saving mode MAX: Fast cooling mode
low/med/high battery protection
:
Press and display℃,repeat pressing the button, display ```
<
-
-
-
<
-
-
<
-
℃,℉,MAX
ECO`
in turn. When the corresponding parameter flashes, stop pressing to confirm the
parameter setting.
06 07