Costway GoPlus EP24430 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Welding Machine
EP24430

2
www.costway.com
3
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
SAFETY INFORMATION
Before using welding, please ensure that
1. Arc welding is dangerous.
2. This welding machine must be connected to a power source in
accordance with appliance electrical codes.
3. For safety,turn off and unplug machine when installing new wire spool,
adjusting wire tension roller or replacing contact tip.
4. Do not weld without the gas nozzle in place. The gas nozzle must
always be installed when welding. The contact tip is electrically “hot” and if it
contacts the grounded work piece it will cause damage.
5. All installation, maintenance, repair operation of this equipment should
be preformed by qualified technicians in accordance with national, state and
local codes.
6. Electric shock will kill people.
7. Cut off power source before assembling, disassembly or maintenance of
the torch or contact tip or changing wire spools.
8. Fumes and welding gases can be dangerous.
9. Welding sparks can cause fire or explosion.
10. Arc rays can burn.
11. Hot metal will burn.
12. Electromagnetic fields may be dangerous.
13. Welding should be done in the dry place,and the humidity should be
less than 90%.
14. Working temperature should be between -10 and 40 degree.
15. Don’t work under sunshine or raining places.Water or rain is strictly
forbidden to leak inside of welder.
16. Don’t work in places filled with dust or corrosive gas.

Good tolerance when working under unstable voltage.

10
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com