Pro Spot PR-155 User manual

1 pc.
PSC-07
Mig Bottle
Support Plate
PSC-05
Lower PR-155 Shelf
PSC-04
Pull Handle
PSC-01
Right Side Panel
PSC-02
Left Side Panel
PSC-03
Rear Panel
PSC-13
Axle
PR-2000-13
Wheel Plate
PSC-12
Wheel
P6-05
Bottom Tray
P10-05A
3" Caster Wheel
P10-35
End Cap
N-06
¼-20 Nut
N-03
M6 Nut
S-43
M6x10
P10-38
Hanger
PR-155
155A Mig Welder
S-05
M6x30
M-88
Chain for Mig Bottle
1 pc.1 pc.1 pc.
1 pc. 1 pc. 2 pc.
2 pc. 2 pc.
1 pc.
2 pc. 1 pc.
2 pc.
1 pc.
2@ 27" ea.
4 pc. 4 pc.
8pc.
32 pc.
P-05
U-Bolt
SR-07
SnapRing
W-24
1/2" Washer
N-38
8mm Nut
PR-155-10
Decal
PSC-18Y
10”Decal
2 pc.
S-44
M6x16
4 pc.
2 pc. 2 pc. 4 pc.
W-20
1/4” Lock
Washer
8 pc.
W-16
5/16 Flat Washer
2 pc.
M-82
Nylon Spacer
2 pc. 2 pc. 2 pc.
W-19
5/16” Lock
Washer
2 pc.
S-93
M8x30 SHCS
2pc.
M-05
15/32" Hose Clamp
1pc.
DCBG
EA
KHMNS
P18 3417
16 2
5
14 13 12
11 615 710
91J
IL
PR-155: MIG Welder
COMPONENT LIST AND ASSEMBLY INSTRUCTIONS

A
L
2
H 2J3
67
K 5
4
M
2
2
B
D
G
1
2
2
E
C
1.
2.
3.
1) Attach wheel plates [H] to the bottom tray [A] using included screws [2].
2) Secure axle [J] using U-Bolts [3]. Make sure that axle is centered.
3) Attach wheels [K] as shown below using snap rings [4].
Put washer [5] between bottom tray [A] and wheel [K].
4) Attach casters [L] using included screws [2].
5) Insert end caps [M].
1) Attach back panel [B] using screws [2]
as shown.
2) Attach left [C] and right [D] panels
using screws [2] as shown.
1) Attach lower shelf [E] to the back and
side panels as shown.
2) Attach pull handle [G] to the lower shelf [E]
using screws [1].
14
15
11
16
9
N
2
10 6
I
P
12
13
S
17
4.
1) Attach PR-155 MIG
welder [S] as shown.
2) Attach hangers [N] to the
back panel as shown.
3) Attach MIG bottle support
plate [I] to the
bottom tray as shown.
4) Put your gas bottle on the
back of the cart and
secure with chains [P]