Country Living AAS14409 User manual

OWNER’S
MANUAL
Date of purchase: _____/ _____/ _____
Fair Oaks 3pc
High Bistro Set
Caution: Carefully Read Instructions and
Procedures for Safe Operation
Product code: D71 M80769
KSN: 0-02640541-5
UPC code: 050874291622
Made in CHINA
Distributed by sears,Roebuck and Co.,Hoffman.Estates,IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.thegreatindoors.com
For questions or comments about product:
Email: [email protected] or Call toll-free: 1-800-416-3511, 9am to 5pm Monday to Friday
Please refer to part numbers when reordering

25
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened
bolts or improper assembly is not covered under our warranty. Please read all
instructions carefully before assembly. If you have any questions regarding your
assembly, call our Customer Service Center at 1-800-416-3511.

43
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION
SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE
KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Step 1: Remove all protective materials and set the parts on a flat, non-abrasive
surface. Identify the parts packed in the carton against the parts list. If you
are missing any parts or are unsure as how to proceed with the assembly,
please call our Customer Service Center at 1-800-416-3511. Do not
attempt assembly if any parts are missing or damaged.
Step 2: Attach the leg connector bracket to the chair frame by using the a bolt and
washer as shown in the diagram. Guide the bolt through the hole in the leg
connector bracket, into the pre-drilled hole in the chair frame. Hand
tighten 2-3 revolutions only. Repeat for the other three sides.
Step 3: After making any necessary adjustments to the alignment of the chair frame
and leg connector bracket, use the hex bolt driver to tighten all bolts. Each
bolt must be tightened a few revolutions at a time. In order to apply equal
pressure to all bolt joints, we recommend working in a cross corner
(X fashion). Repeat until all bolts are tight. Do not over tighten. Cover all
bolts with the bolt covers provided.
Step 4: Your chair is now ready for use. If you have any questions, please call our
Customer Service Center at 1-800-416-3511.