Country Living Gladstone User manual

OWNER’S MANUAL
Date of purchase: _____/ _____/ _____
Caution: Do not attempt to assemble if any
parts are missing or damaged!
Product code: D71 M80771
UPC code: 806599112212
1/3
Gladstone 7pc Dining Table

2/3
1
PART LIST
16
4
METAL WASHER
16
TOUCH-UP PAINT
TABLE TOP
TABLE LEG
116
LOCK WASHER 16
H
E
F
G
D
A
B
CBOLT(M6x20mm) HEX WRENCH
PLASTIC BOLT
CAP
1
1
I
PLASTIC UMBRELLA
RING

Step 1:
Turn the table top upside down on a flat, soft surface. Attach the table leg to the table top by inserting bolt with lock and
metal washer through the pre-drilled holes on the table top and leg. Tighten all bolts in a cross (X) pattern. Cover all
bolts with plastic bolt caps.
Step 2:
Turn the table in the upright position. Insert the umbrella ring in the center of the table top.
Your table is now ready for use. Keep touch-up paint for future use for table and chairs.
IMPORTANT: To avoid damage to your table:
-In storing patio furniture, do not stack anything on glass, stone or marble tabletops.
-Befor storing, drain all water that may have accumulated in or around patio furniture
frames. If not drained properly, water can cause freeze damage.
-Use of a patio furniture cover is recommended.
-For safety reasons, do not sit or stand on the table.
ASSEMBLY INSTRUCTIONS
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a nonabrasive
surface to avoid scratching. If you have any questions, please call our Customer Service Center at 866-538-7735,
(fax: [phone]), Monday-Friday, 9:00a.m.-5:00p.m. CST, e-mail: [email protected] or visit our website at
www.homecasual.net.
3/3
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
.
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Please refer to part numbers when reordering
sears.com
Email: [email protected] or Call toll-free: 866-538-7735

OWNER’S MANUAL
Date of purchase: _____/ _____/ _____
Caution: Do not attempt to assemble if any
parts are missing or damaged!
Product code: D71 M80771
UPC code: 806599112212
1/3
Gladstone 7pc Dining Set
Swivel Rocker

2/3
PART LIST
4
1
METAL WASHER
4
CHAIR FRAME
CHAIR BASE
1
4
LOCK WASHER 4
J
E
F
I
D
A
B
C
BOLT (M8x40mm)
HEX WRENCH
PLASTIC BOLT
CAP
2
4
STEEL PLATE
1
T-ROCK
4
4
K
H
G
NUT
PLASTIC NUT
CAP

3/3
ASSEMBLY INSTRUCTIONS
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a nonabrasive
surface to avoid scratching. If you have any questions, please call our Customer Service Center at 866-538-7735,
(fax: [phone]), Monday-Friday,9:00a.m.-5:00p.m. CST, e-mail: [email protected] or visit our website at
Step 1: Place the chair frame face down on a flat, soft surface. Align the T-rock on the chair frame. (Warning: the direction
of the arrow on the T-rock must be the same as the direction of the arrow on the chair frame.) （fig. 1）
Step 2: Attach T-rock to chair frame in the order of bolt, metal washer, rectangular steel plate, chair frame, T-rock,
rectangular steel plate, lock washer and nut. Tighten all bolts and nuts by using the hex wrench. （fig.1）
Step 3: Cover all bolts and nuts with plastic caps.
Step 4: Insert the chair frame into the chair base by using a twisting motion as you insert.（fig.2）Place the cushion on
the chair. Your chair is now ready for use.
fig. 2
B
A
D
G
C
C
J
I
E
fig.1
www.homecasual.net.
chair
back
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
.
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Please refer to part numbers when reordering
sears.com
Email: [email protected] or Call toll-free: 866-538-7735