Countryside CLS Revo 360 User manual

Setup Guide
CLS Revo 360
WiFi Camera

2
Arial Mounting Bracket
SpeakerCamera BodyPlug

3
Step 1.
Assemble the camera
• Screw the 3 small bolts into the
mounting bracket - not fully tight.
• Feed the camera cables through the
mounting bracket.
• Move the mount so it is in line with
the arrow on the camera body.
• Tighten the three bolts to securely
attach the bracket to the camera
body.
• Screw the arial to the brass thread
on the camera body.

4
Step 2.
• Remove the rectangular access
panel with a screwdriver from the
back of the security camera.
• Insert your SD card (optional) as
shown in the photo.
• The SD card should gently click into
place.
• Make sure the access panel is
securely screwed back down to
ensure water resistance.
Insert memory card

5
SD Card Slot

6
Step 3.
• Holding the 360 camera by the
mounting bracket connect it to the
power. The camera body will begin
to move/rotate during the start-up
process.
• Connect the black speaker to the
chrome-headed cable coming from
the camera.
• The rest of the cables are not
required, you only need to use the
DC barrel connector for power
supply (Pictured far right).
• If you are using the 12V leisure
battery connection leads, you will
not need to use the camera’s plug.
Connect to power

7
Ethernet
Speaker
Reset
Power

8
Step 4.
• On your phone or tablet go to
the App / Google Play store and
download the CamHipro app.
• Open the app and grant permission.
• Go to the Wi-Fi settings on your
device and connect to the network
named IPCAM***
• The password is 01234567
• When connected go back to the
Camhipro app.
Add camera to app
CamHipro

9
Select ‘Add Camera’
Select ‘Device in Use’
Select ‘IP Camera’
Select ‘Scan QR Code’

10
Scan QR Code
Name Your Camera
Select ‘Conrm Add’
Wait for Connection

11
Tap ‘Yes’ to Change
Password
Complete the Tutorial

12
Step 5.
• Tap the ‘cog’ icon and complete
these steps to connect to your
chosen Wi-Fi network.
• Your camera will then be connected
to your Wi-Fi. This can take up to 30
seconds.
Connect to WI-Fi
Tap ‘Wireless Settings’ Tap ‘Get wireless
network around device’

13
Step 6.
• Install your camera in your chosen
location with internet connection
and re-connect to the power.
• To move your 360 camera, place your
nger or thumb in the centre of the
screen and swipe in the direction
you want to move the camera.
• The camera defaults to SD ‘standard
denition’ when installed, click
on SD to change to HD for higher
quality.
• Within the app menu you will nd
recording/photo options along with
the zoom function.
• Your camera will auto-focus, don’t
use the manual-focussing found
within the zoom option.
Using your 360° Camera

clsonline.co.uk