Set up your Go 2 Camera
1. Download the Arlo app and follow the setup
instructions for your camera.
2. We recommend charging the battery indoors
before mounting your camera.
Installation
1. Press the release button and separate the camera
from the camera housing.
2. Insert the battery.
3. For LTE access, verify that the SIM card is installed
and activated.
4. Insert the camera back into the housing.
SIM card
Micro SD card
(optional)
Release button
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC. Any other
trademarks are for reference purposes.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For regulatory compliance information including the EU Declaration of
Conformity, visit www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd
Ground Floor, Building 3
University Technology Centre
Curraheen Road, Cork T12 EF21 Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
