Countryside CLS Static User manual

Setup Guide
CLS Static
Wi-Fi Camera

2
Step 1.
Assemble the camera
• Screw the aerial onto the camera
without overtightening.
Step 2.
• Remove the rectangular access
panel with a screwdriver from the
bottom of the security camera.
• Insert your SD card (optional) as
shown in the photo.
• Make sure the access panel is
securely screwed back down to
ensure water resistance.
Insert SD card

3

4
Step 3.
• Use the DC barrel to connect the
security camera to the power supply
• If you are using the 12V leisure
battery connection leads, you will
not need to use the camera’s plug.
Connect to power

5
Ethernet
Reset
Power

6
Step 4.
• On your phone or tablet go to
the App / Google Play store and
download the CamHipro app.
• Open the app and grant permission.
• Go to the Wi-Fi settings on your
device and connect to the network
named IPCAM***
• The password is 01234567
• When connected go back to the
Camhipro app.
Add camera to app
CamHipro

7
Select ‘Add Camera’
Select ‘Device in Use’
Select ‘IP Camera’
Select ‘Scan QR Code’

8
Scan QR Code
Name Your Camera
Select ‘Conrm Add’
Wait for Connection

9
Tap ‘Yes’ to Change
Password
Complete the Tutorial

10
Step 5.
• Tap the ‘cog’ icon and complete
these steps to connect to your
chosen Wi-Fi network.
• Your camera will then be connected
to your Wi-Fi. This can take up to 30
seconds.
Connect to WI-Fi
Tap ‘Wireless Settings’ Tap ‘Get wireless
network around device’

11
Step 6.
• Install your camera in your chosen
location with internet connection
and re-connect to the power.
• To zoom your static camera, place
your nger and thumb in the middle
of the screen and pinch them
together.
• The camera defaults to SD ‘standard
denition’ when installed, click
on SD to change to HD for higher
quality.
• Within the app menu you will nd
recording/photo options along with
the zoom function
• Your camera will auto-focus, don’t
use the manual-focussing found
within the zoom option
Using your Static Camera

clsonline.co.uk