CP TECHNOLOGIES WBR-6804 User manual

LevelOne
WBR-6804
150Mbps Wireless Dual-WAN 3G Router
Quick Installation Guide

Default Settings
IP Address 192.168.1.1
Password admin
Wireless Mode Enable
Wireless SSID LevelOne
Security None
This Quick Installation Guide only describes the most basic
situations and settings. All detailed information is described in the
user manual.

Package Contents
•WBR-6804
•Power Adapter
•RJ-45 Cable
•CD-ROM with Manual and QIG
•Quick Installation Guide
If any of the above items are missing, please contact your retailer
or distributor.
(Figure 1)
Antenna
Reset Button
Mobile /Status LED
WAN LED
WiFi LED
LAN LED
WPS Button

Other LED indicator:
LED Indicator Description
USB 3G
Green and
Steady On USB 3G connection is established
Green and
Blinking Data packet transferred via USB 3G
Ethernet
WAN
Green and
Steady On
Ethernet WAN connection is
established
Green and
Blinking
Data packet transferred via Ethernet
WAN
Power JACK
WAN PORT
LAN PORT
USB PORT

WiFi /
WPS
Green and
Blinking Data packet transferred via WiFi
Green and
Blinking In WPS PBC mode
OFF WiFi radio is disabled
Ethernet
LAN
1~4
Green and
Steady On
Ethernet LAN connection is
established
Green and
Blinking
Data packet transferred via Ethernet
LAN
(Figure 2)

(Figure 3)
(Figure 4)
(Figure 5)

Installation (Figure 1)
1. Please connect the WBR-6804 to the RJ-45 Ethernet Port of
your PC. Then Power-On the WBR-6804.
2. Installation is now completed. You can now begin to
configure the device.
Check Your Network Settings to login web UI (Figure 2)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose
“Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the
following screen and make sure you have selected “Obtain
IP address automatically”
Before you begin, please have your ISP‟s username and
password details ready.

Configuration
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the following:
http://192.168.1.1 (Figure 3)
2. When prompted, use the following password.
Password: admin (Figure 4)
3. The first time you connect to the WBR-6804, you should run
the Setup Wizard to configure the Internet Connection.
Select Wizard and click Next.(Figure 5)
This wizard will guide you through the setup in 6 easy steps.
Note: For effective wireless security, LevelOne recommends
WPA2-PSK encryption methods.