Craftsman CMXGMAM1125500 Guide

778-15620© 2018 11A-B2RQ CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Wing Nuts
A. Remove the wing nuts and carriage bolts
securing the upper handle to the lower
handle.
Pivot the upper handle
upward.
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
A
B
C
D
Starter
Rope Handle
Blade Control Handle
B. Remove T-bolts from
the handle brackets.
T-Bolt
B
A
A
B
B
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
Pull upward on the
handle until the holes
in lower handle line up
with the holes
in the handle bracket.
A
14
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Fast Start Guide - Engine Start
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
and FOLLOW THE important SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569

778-15620© 2018 11A-B2RQ CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
Fill tank with fresh gas to within /-inch of
top of tank. Do not overfill.
Do not use E85 or fuel containing more than
10% Ethanol.
Pour the entire contents of the SAE 10W 30 oil
bottle (supplied) into the oil fill. Check the oil level
by inserting the dipstick (not threading it) into the
oil fill. (Refer to the Operator’s Manual)
Oil Fill
Gas Cap
Fuel Valve
Rotate the fuel valve into the Open position.
While standing behind the machine,
pivot the Blade Control Handle against
the upper handle. The choke control will
automatically start moving toward the OFF position.
Grasp the starter rope handle and pull with a quick,
full-arm stroke. If the engine does not start after
three pulls, repeat Step 3 and Step 4.
13
24
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Fast Start Guide - Engine Start
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
and FOLLOW THE important SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
68
79
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Fast Start Guide - Engine Start
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
and FOLLOW THE important SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569