Craftsman 113.198510 User manual

m
fSOVe This Manual
For FuhJre' Referer_ce
SEARS
owners
manual
MODEL NO.
443.498540
10 RADIALSAW
'NTTH4.4"CABINET
3 DRAWERSAND
4DOOR
"_,]t
•+.r._( X_'
CAUTION:
READ ALL
INSTRUCTIONS
CAREFULLY
Immm0
[RAFTSMAN
IO-INCH RADIAL SAW
• assembly
•operating
•repair parts
J _ J
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
l:_rt NO ,_P_,_33 Pnnt_cl ,n uSA
F ...................... 1
FULL ONE YEAR WARRANTY ON CRAFTSMAN RADIAL SAW
I! wdhm one yeir from the dale ol ptJ¢chlle !l_ts CraftsmIn Rid*If $IW !lds clue Io • defect pn mate.al or
workmlnsh*p Seers wilt repi*t d free of chlr_e
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THf NEAREST SFARS SERVIC[ r
CI:NTL_R DEPARTMENT THROUGHOUT THE UNITED ST&TES
This wafrJnfy ipD!te• only wh*!e this produ(I 0| used *n !he Umted Stltet
Th0s werrlnly Quves you SO_III¢ legal r_ghl| 8nd you may all_, hive _ther .ghls wh_('h _ry from stale Io sI_IIe
SFkRS ROEBUCK AND CO O_PT 690 731A_elrl Towe, Ch*¢a_, 1L (y0_84
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS
?
3
4
S
6
7
8
10
11
12
KNOW YOUR POWER TOOL
. t"* I_ .ltf _.,J _ _h* f., . . _.,l'r I,_ ,1['1 ,r ._* ._
Ir q r_,l,tt, 1% W* ,P' th_ "['_ ' f l l_ ' _ t
i*_Hr'_ _ |_t', n,I ,1_ I tr • t,,
GF OUND ALL TOOLS
%.rr_ ,_ ,i.
KEEP GUARDS IN PLACE
REMOVE ADJUSTING KEYS AND WRENCHES
L,_,_,I,I) nl ,_r
KEEP WORK AREA CLEAN
! I,. rrnl_%I r',)t h.) _,I [l_l*_r y _ ,I. f ) W,I_ ,t %,1W _.%t
AVOIO CANGEROUS ENV!RONMENT
I-),)_' II_P|)H'I, Pr h_ ,n%,r,,_ _m[, ,, _,*,1',,, af,_)"_ r
t'x 1,._%1' tl'plI_ ! r,l,_ K _'pii W, Ir k ,1 r_ ,I WHll I,(_t• _', J
!)r,)v,d_' ,_dPq._t*' % Jt r%)ljfl'Jnfl ] _' "rk %_1,1( _'
KEEP CHILDREN AWAY
w,)rk ,irPa
MAKE WORKSHOP CHILD-PROOF
_,tar t_- lip
OONT F_RCE TOOL
It Will _'_l, thl _ ,t_ b*,lt_,, ,!'_d _,If_'t ,_t lhH r,11, ' f,_'
USE RIGHT TOOL
WEAR PROPER APPAREL
D(_ rl()l W_%Ir It)0%p (Iolhmq (II)VP% f,_]( kl_t_ ._r
if wPJry Itchy.) ¢, WrI'_ W_l( hPS, I _) _]PI (al_(:]ht nr
rr,,_v,P_[)aft% _1)11_)_ p_*)r)!wPar ,%rpl ,)rltrlipr_(JprJ
h,l,r R{)II hlrlq _lPr_ve•% HhII_P the Plh_W
USE SAFETY GOGGLES (Held Protection)
13
14
15
_6
17
18
19
2O
21
22
%t _l f y r_irl%%rl • J_ •,%1 f,t( ' , ,1 ,, _ _ +
r_tl , ,; ,l,*_r If ,r _. ,1 dr,_ _' ' , * I r lit _ ,t 1_
++|,_ , }t.+l
SECURE WORK
DONT OVERREACH
+ i Il_J,, _ _* tiJ"
_<• # [. _+' +| , • + , , ',,J ,I r _ rI' Ir ,i' I ' ,
MAINTAIN TOOLS WITH CARE
+Ir' +' ri,l '_ rI_l H+ _ *,%%11_ +, ,
nlSCONNECT TOOLS
AVOID ACCIDENTAL STARTING
_,lk +, %_j+* €, tr h.'_ _{I_. ! [_ ,_,,t. t'_ t ,r*
rI'JUf_lr'{ _ .t
USE RECOMMENDED ACCESSORIES
('+)r_%t+4t |h+_ ,_wr_pr %+I, Ir,h,ll fpr+,t ,,rhr,,_+_ J+'r|
p,t'_y |h*'a, +_,_,,rip% "rh*.,+_,<,,)t rti_)r _1 *+, 1_ e +_%
b_t+'_+(_ rt_ay t ads+ + haz,Ird _
NEVER STAND ON TOOL
%_'r,l_H% _r Hr, v(,ll;Id ")l _ hr ,f fP,p t_,I _, l,p[_P'| P
th*, tH|t,_](_ t, , ,% ,}t IirJpr,l,_illy _r)' I{|t t+•{_ _D('
CHECK DAMAGED PARTS
I]plorp flltth!,, t*'+P flh+, h)H' ,I _J_+<_r,J -rr )th*_r
t,_Pn%Hrp|tlal,fwd!, _+,r,iIr+[,r ip++_rh_ ar_,Jp+,rt 1+r_
,|% ir'|prllJp'J #tJi_(|l{ {_l_l k !.}r <11,t]r'rtlpt t ,}f
+)fl_tr|% rT,,h+r,tm_ r_r_{_+lPy,)thpr <,m_J_t_,)-_fh,3t
r_+[)l,lr t L)
DIRECTION OF FEED
|*'*'_J Work ,nt,) _t)l_dP c_r • h|t*,r ,lqa,_t thf,
(J,r_(t.)r, of r,)l,'tl,,)r_ <_f th_ _h'l+J_' ,)r ,,t|Pr t_r ly
NEVER LEAVE TOOL RUNNING UNATTENDED
Ttjr+_ powPr +Ill [3t)r_ t np2{vp 1,I<)I ljr_flJ '| ( _PIIP_ |D
a € ,tmph,t+. stop

additional instructions for radial arm saws
BEFORE USING THE SAW
WARNING TO AVOID MISTAKEF, IHAT COULD
RESULT IN SERIOUS, PERMANE NT tNJURY 00
NOT CONNECT POWER CORD UNTIL THE FOL
LOWING STEPS HAVE SEEN SATISFACTORILY
COMPLETED
**,* ,, W _+ ]+ | •,WJ ,It ' '|" I*_
%1 '+,t t+'' ¸1'"I ,)' f, W W_,_{ W ,_+ fpi, I ,,i+*,
,, W (,+,r ¸ I j J_, ,_ _
,_ ,_r
.... :.: _,
-o •
WHEN INSTALLING OR MOVING THE
SAW
h)l ,th+' r b it)( k h,|r'rJIp b+'f')fP n'_()v,rlr_ Th_ '_1_
T,Jav,, d,r_l jrv+r,>,_, r'pxb_+Ipdsawrn,jv_,r_]_,_ f
wa+k ,_r Sl,dP _,jr,r_q r,,,rr_al f)p+,,_it,,),
,t)_ W_h+.n ta_l_. _XIPPs,or_ s _v*+_ /d _'+Jf a_"
add÷'d !+) P,thpr s,d_ +)t fhp _.a_ n_akt, _,,,+.
y(),jP,thpr h )llthesawt_)th*. fl,+_)f, ; S'JI)l,','t
the O_,lPr e[_-J of thpextpr sio n born the, fh._,
as appropr.ate
Ti, Bv...(J ,r_lur f from unpxr(.( ted { arr,age lravel
ad.Jst I_'vPhng tpt, t _() the arm bits sl,qh*ly
rJ++_nwar di(jlher_+ar s,_th;tt thPtarrlagpw,_lnot
r(jl, forward dIJ_' t+l ,:)fav,t vrorward dr,fl +)f th++
(.U'ta_e on a_, Improperly !eyelid saw (ould
(.at+sP th_ blade to lunge tGrward due t+_ u _
t tr i¢ r ; Itl + 4+r ' ,),J_j
BEFORE EACH USE
Plan your work
'+ •., t*,+ _ ,,; t. r', trL+ *,, _+,, tt * _,,_ t *
•)v', 't*_'.'¢ +'hrpawaqowhJ, h • ,+ dr_'_.ljIf,n tt,r+ v_r
_,+rko _=(pSa, d t;IRd+., ,+t_ta(t rJ,)r ,_t _+<_ f_*r (*.%
,V,,_ 4+. r)f part,(Ip h ¸,ar d ,)r ,fhpr ( ,,mpr •t+
,_,l'pr,aE% ,JSP } 4th,( k _t+rnb+,r '(_ng _rh_ jL)h *,,
_+.t_ rl,J ,p (_np _+e(p fr+;rr, _rl d tr+ Pnd }f the S,I_
•_r)_ arid tal _Prl(JUqh to hea _lPac,l Pvpn wqtt lhP
t, I,if fhe w+_rkp,e(p _ppta+,_ ar_y fer_(_ wh_,rl+
•,x St,,'q SlOtS ,r, th_ fe_,(P tare weakP,_pd +he
_- ¢,e o_ (an snag the Wl)rkp.p(_p dur,ng r,pp,,%)
_p*'rat'Or'S Always chect_ (abl_, lOCkS to make
s,_rp any new fen( (. _ hel m SeCh'_ly . _.,'P paqe 22,
at.( rdppts at{, (.aljs_lJ by JSt, '}f lh,. V_rl)rI,_ t¢|,t
blad_ dt,n badlyset mpr,_ I) r_Vshar_-r'*-II ,I
tOO i_, and by blade, rh,_,al,_rh+•_ t_,tt the _,•j_
St,+ _ la_, ,StaltthpS.lW_ thr,;_,,r k,(kha(k thp
work|j,_.( o Rt the opprat_;r
T() av,_,d C_tt,ng t_]+)l ta fur _ ann thr_)w._ sh_a|)_ei
'broken p,er e_,of blad_ ', ,_.l.,_nly hladl_,So t,Jlhl,r
(_.tt,ng t+)i_Is nlarkPd f(j. +)b+,rat,ng Sp_pds ]4_I')
rpm +)r h_gh_t NPvPr JsP aLi_tt,r,_ h)'_' lar ]e+ ,n
rJ,arv_p(el thar, lhPd,arnPlpr b)r Wh,(h th_sawwas
des,qnPd
TO avo,d jam(_,ll_g of thP blame lhrow_ WO{k
p,p( Ir+., ann dan_a(_ tL) lh_ blade < <)liars nPvr_r
'JSP a Orokpr_ '/_atp_.d or ,Jnbalar,(Pd blade, r)_+
Put +)v_rbghter, arbor ,_tJi lJsp arb,)r wre_( hP'_ 1,
srlu,J it sP(tjrPiy
To av,),d ,n.+ry tr+)m a_ ( 'Jental hladP ( o[_ta( I hy
tl-_p WOrk[_ce ,)r the oppraf_r d) not perfr_rm
layout assembly or Setup wr)¢k ,_r_ the fable
Wh,lp thp ( ;+lt,_,_] t+)_. ,S r,flabng The+ rotat,t {_
1., ,_,,I 1 ,.t lr',l tht,_ ,tr_th s,) h_tt.rlLJ *_.
blart++ <at,'_,r+,} lhe SdW t_) L+r,expe(IPdly , ,,t,
f,_rwatd
}J_*;(tlpr,Qht({,,4td T,_av')ldlt)5,r_{:J(Dptr+), f'Kp
hv tP,r_,wr |1+.(t,S nl vpr J,jar+yt*jtt,++gtjr,lt+b_.t ,
;,..;)*,r'] .2.'d'_'tt' ?. +_.p._rt_.,r_|_,a(+,, _. n_t _li_,r_
-_ r¸ t a'J_,+MPd [f()p_)rly
T_ av,_,d nli,rv froff_ _hrow- pIp(Pr_ %[,pS hill,J+
(+r,tart tit ammlrlq Of thPw)rkpiP(p ftlakPStjrP
r, j _)lay Px,bt_ b++tWppl_ the t Olhmr_ arld (_)iuz_r,
_,jpp,_rt _)_ ,rl the t drr.a_]_ 'and th+tt thP a_m y+k_,
h,.vp ¸ i,_( W_, t lamps .lip bghf
T,, a. ,J 'rjIJry |rr)q] tht Wt' Jbl+_+ I% _, ,_ b .,r
,,In t,,,r -},,f fhpbla,!*.d,+_t,)[ .n(h,.lq,)t +h_ hlad*'
(l, <,h,(t,r_ h,)ard%
,1 [), rl,,t _avp,t,.)l_qb._drd,jr,%t+pl:_ort,,,t., _(h+.
_pr,,_g +_f thp b,+lr,J t a,_,+,_, ,t ttJ twt_,f ,_r r_s*
Ir,,rt, f*,_, table
lh+' trlhi*, _r_r _, they harp t)*+P +, (,•t
_r',v. I+ ,,_p_ ,,f !,tt,, _twp , ,, b,_,+,,t ,t
t_ s,Z_ ar 1 tP,+ Iv(+, +f d'* tat '_' t , t,_
p_ th_t,+)p,t
tlhl*" "_'_",',' ,' ',' .t% ar _ld,t t r,',t' %,.[,(, ,r'
,nq ,+, |).jlhr_{] th+. w_)rw_,,t), *.
'+" _lPvP_ t (_t W(,lkp,,i PS _)ia( P*J S,df, h_,,J*..,,
+,tat k++d(_P tr)p(_tea( h,)|h_,_r Th_,{),pf* {,, _,
S, ,f*, ,)r_ p_( h(_|hl,r
_/[AR YOUR
Thp ,t|le+at,o{1 (+l any power tool ca n PSIJII ,'
+o_P+gnobiP(tsbp,r_qthrownmtothpe_,p_ wh,+ t
(an r_,Sultmperrt ar_pntey_damage AIway%,,_,,a,
sa!_*ty PcggIPs C()mplym._ wdh ANSI Zff ;I_sh, }W r
()r pa(kaQP+ Safety (_oggles are ava,labiP a _
Sears rPta. catalog stores USe of goqgles or
glaSSes not _r_ (:ornphan(p with AN_I Z_7 1co_J_d
resull n severe _nlury" trOt'r, breakage of thp eye
prote( bor _
"tO a#o_d injury f'om unContrOllable _ea[bon Or
thrown Oble(.f snever turn the saw ON before
Ltearmg the table or work surface of all obpcts
(tools scraD_ of wood Pie I ex(_p+ the pr,3pefly
supported workplecP and _elated fPPd ,), support
dPwceS for thP •_pe*3!.*,._ p+armPd
WHENEVER THE SAW IS RUNNING
AIWaySkPe_ _al_'rt f_'Iort'_t'_it+_W f,3r_hh.ltUv "_,t,PPd
fromlrequP_t _JSP _)t your sawifo(,ausea(areIPs%
mlStak _ A!waYs remember Ihat a (arpIpss Ira4 tlOn
'a{.e( (_nd 'S 5,_ff,( Id.nt t•mfh( tSever f+ p+m,., IPP, t
,#_lljry
II .f ,_t saw makes an _JntaP'l_l,,_r r' %*. ,_r (
v,hra*_. Pl(essiv_ly s(l'dl the _, , i+, rl ,n'_m_.d_
+lt*.ly I_+, r_r)t f_,(arl _.r,f,i th*' S _,lr([" ha% h_t_t,
Ir_ a*Pd a+lrt the proh+prv_ (orrpi t++<t
D•) r',)l (¥( le thP r'nohjr Sw,I(. h (]IX/ a_'d Of f
Ir)(,'._m In th e evPf;f th,_ Should _v+_r ,_ {I,_ hJrr,
t'_P Swat( t+J_ at ,,v_ t%P %a Nhl.]l+ t'! ( +)_Th' t _1
('lJi_'l_[)lt_tf 'St(J_t arid r_rrl•)v*s _lp %_ltr hkey If)
,lv')_d d:IrTlagl, t,> th+. hiadp Ir d tlflr_t ,pt,qht+,n
P+PVPtp/'_rtf)rm,-}r yId_Prahr;t_ft_++*tl,lrl,t It+ _jr/, ,|r'
,)(( t+r b()m b+•ld!'t rlPfa(t,)r lhrr)wr, [),_r I_ wr,prl
the W,)_k|),*+(p,S t ,re fr,)m !he ha,,t'_ _ r(-_+_*,<]r,d
_,Par_% f+'_,J+rK_ fhp sawbladP ,nt,l ,t W _'kll'PI P +)'
_€'+ldin_ t hP Wr)fk_iP( {_ 'r_{ ,*hi' %awhladP {_, ,)th,_r
(lJtllrlq tr)i)_ Wllh(),it lj_++1(_ tfi_, (*)11( F] r)l Sl)r]'_+ +){her
l'rt)pP rdevl( P t., [)r*_vpT t th*_ W_rk._ _f_( e fr,jn]
tWrr+hrlgarldb,niJ,r L_,_Ptt,pr ,+et,r,r_f r)Id,_r n(]tht,
(,_thr,g ,[)+,rah{_r,
l',lV,,ilt ir it+fy fri)rn 1,r'l+)l_l_) it++,t _,t+|rt*, ,j r,+,++,.
,_efl'r_+llT t,, f p*, a ++|ei_+ed _+a_vhladP w fh ,,j+ fr%I
t.,,I,,n_J the. _..I_. ()I I and r_m')v'fl_ It,* • _.W,h h
k!,y ttthPsa_b,,tdp,sStallpd<)r i_f_lm_:_ dsh +trh*,
and (+1+r,ag_+ (he(w fr+_ SaWbl_Id_,+.q,,ar+-..S_,t,,
thp tab'P s,Jrfa{ e a r, 1 h+ trip re+l( P a_,J t hPt k it)'
h*_pi %eP p•IClP .7"L Ad,ust as + J.< ate-,
,t_, p, ,,+ _r ,% (.,f_l NPvt •_ t(',.Iv*' th+. _,elV_ it*•,1 +'_ pr
p_IW_ +r • (.)N _' b_to_P lh*' _ It,+ ;h,+) rtla_
( (lint+ h) .4 (,)nlpl*_t{.. %{,'I
T () aq' +,d 1jrla+j+h[)r iZpd %d_ t jS_ r l+_f 11 ) V!' f i ++ _+'II# I L{t
key and pt tltlp key aW_ly bPfl_rP IPav p_} It,+, %a_,
arP+l
BEFORE STARTING A RIPPING TYPE CUT
*{,) aVL)i d ,nlur yfr,)r+, bPmg struck by a throwr,
workl_,eCP p(_slb,Jn the sa_ st, nplther y(_LJ a
helper Or a casua' observer tS fo_( ed to _tar+d _n
hr_p w,Th lhe SaWblad_, or workpleLe
Wh"r'P_erposSiblp t+SPlhe ,n rip pos,t,o_ (_eP
p, _*' ]4 IThis p_(_vldes max++_+t_m (.le.ranLp tot
(+_Pdln_] by harld push ._tick or push bloc+, as
approprlale
TO avoid thrown W{)'kptP_.es or being pt,l•P'd int')
thesawbof.)rt, you(.an redc t pushth_wurkp,eLp
ttom the r'os_,side Iopposlte the SaWduSt _hausl
chulP+ ,)t thP guard Note tht, warning O n the
guard

dl ,if, _DANGER
INSPECT YOUR WORKPIECE
',:]d,a dtlt] _4W
1,,%_, 0t,t l< whpr r,p_,,ng S' ')rt el r) tt_ ',q .r,, t,p_
,r_n(] '" '_a_r_w 12 to 612.n(hes w,dP, w,,r_
[,,_" _"- [J_Pap,jsnh Or k as,,h,strat-d,)_,pa_ f'
h_lween th_ fp_ #ar.: fhp b,4d_
M)
%_ , 'r_d [,PI * a_a,r,_.t tr,1 ,,,_i*,,.f ,,{ p,l,, t' t,,,,l',f _ =3
t_f *'v_'t ,f r,f ft I_ sart,_ fhu k_'_'%_
WHILE DOING A RIP TYPE OPERATION
t_, _,ar,f %fr_rt .-ln dr ,]_,_._,'*. th*, ,tl, ,,, t_,t'
_4 _'_' _,,d+ Th,S w,u rp(j ,tt_ 4d'Jl'd ?a_l_, ,_,,iJp,,,*
f,, ,()r,r.) O_ w,dP w_)'kp,_l p'_ lhal extpt_ t,e¢,,_,,f
tr,_, _,,r,_l h or w_dtt, ,_f the, S_W lahle h prev:.,,,l
_rkp_p(p frtlPTI hpe_(_ fhrowr ,_t) It t_ll% trtJt_l lh_,
ts()l_'
%_'._" ][,_.,ly th_ tt.* d f )rf _. f_the. SP( t,,. ,,f t',_
w',rk[, ++l t' tt],4_ v_.h t_t'( ,,r_l+. fill { ,it,_(! tfr+ +,
f"f'( _' f P_"t f )t_ f. Wh++r r DP r _ rt,,+%l IIW.)_%
4_'[ I,_,,f h+'tw++pr, )t_, _awhlad _ 4r,d ft,+ t++r_( +.
It].4 + lr_ _ )) tijt t)v ft,+. fl_ld_. Ik+,rf, Wlh r,+_ +_+
(,,r_r P'I' f _h_+l )r_ tr,_ _+ldP ra,J_,_,_ l ,_ k, kh+4 k
_i"v+ +' f'_h' t, ft,t. |,+.1 I _r_af ha% p)+,*,r f _1 ,j#f ,r f
th_ t,l_td+" t,_1% , i+ t,a,_I| lt'f++ _t ,|
_+'p_' _,_j%_,' (_ ]h++ %_,r f, _+ ,jl fh+, w,)r_[',+,( +
h_fw+,++r, ff,+ f.ad_, ar+d thp feraL+. _nf,I fhr, [_,_( f
ha% hP_r plj_ht+qJ +,JmplelP_y [last lhe bladP _,
th_ blade w,II n()t _jt,.Ih the. p_p_ parid lhr+)w ,1 hA, k
at _tlp .d)p,ah)_
BEFORE OOING A CROSSCUT TYPE CUT
T,iv,, f hl,3d_' I ,,r_f,ir t d'_ n _f p_ rforr_, ,1,_
1() rna_ 'T.ZP ptofe+( lh)_ t{l)t_ a( t +dpr_|#l l_lad{D
<_'ta_ I arid _PdU(f' r,£_* ,)f lan]m,llg OblP_ IS ,nh
ar'1 a|l,J'_larq k,(_ba(k [,awi'_ t,_ pjst (l.ar fh_.
f,jp ,)t fh_ tp_( p++,_thp w,)rkl "++(1' wt,_ hev_I ,%
h_gfne_ ]hP aPti k+(.khatk pawl a'+spmblv will
pray.Jr + r_.td+f,or+41 _p_.+It,l,r++] h,,_, ( tjr,la( f w,t[ If,,
if+It.! ._I lhl" brad+,
TO prevent Ir_e ttJtf,r_ I h)(l from _,at,b,nq th+.
t ]htl. fir w<)rkpI++r ++ ar_+1 _e,P_ p,{,pPl(++d f,_.ird
y(,tJ r l_v++t h)wPt a r+%'I_Iv,ttt_ +],t(ir,_j f(1_+l ,t,I ,tfi_+
_at_h+ .,_ ,I w,_rkpi+.(+_ wlth " ,f _,t<)t I0(k,r,_) fh+" r,i_
' ,+ kr_in.tIpar_d(.lamp n_ fP+++wr_rkp,p_ ÷. r+ [_qa< +*
_]I_i++._%_ + lh* _ +'lar,dl_, ()111V +|f)_+r h.14,"+_ t,rPll_+
")ra_+petf th+_ + arrlaQ+, h_rldl_,
Y,_av,_,dtjlad+.r ,),,la I t ,+ i_i ,,y f* +r+ .it_ r,J_+,,( ,._
,.if p_l+(_, n+.v+ir ,_%P aler,,Jth ++lop on th+, + h t )if
++_'d(_r ++,Ig",'l th(_w,_rkl+,.p+ +_ N++v_r hang+)+'t(),,r
t< l,(h tit+.( ,_fr_+f p,+.rp +f fh+.w()tkp,t+(_._+t_,+, th+
p,+W+._,<_ (I_ ,_, i_r lht .d_+t_l_(J+ + _+r ._+If,I_ T +
[,r+_v_',+t p,Pt h,p,] th+tt r ,+L.Id( +l(J'_+' lh_*i +'( _ t , _++.
th¢,_W_ th+., .t,+ffl),_.i +, ,,,%f r_+,v_ r h_f.,r,#,i1++rJ
|_L+%h+'d _,r ,teat+i, .f wh, _. t_,+_ _ 1,1<f+_ ._, 'I , r,,r+q
INSPECT YOU.q WORKPIECE
,.lChtl ,nil 'tItl_ *hladl ri,.ll._ %hr+. P,+ w, lrl_[,,_.+ ÷
_t,l I tl*]_..ijp[l()rt% lf_r_i I' Id_lt + f,)iftjr_.% ,_r ,,i_,+
lh,.r I. tl ,,_ r_ ,it+.r,.i1 f_l.tW+++,r, thl> Wrlrk f],+'l +' It"f
WHILE DOING A CROSSCUT TYPE CUT
_t
,r,I_ ?ti_, _, ,+ 11 1,, ef_ .] 4¢I,%%r ,dr r1_ fvi)_+ _[,_i.1 +, +r,
lh_ _3ladp
BEFORE USING ACCESSORIES
glossary of terms for woodworking
Antf-Ktckback Pawls (AK8)
[)!'V,(P Wht(h whel _r{)pt_rly adjusfe(f +% 1P_.*(lP_d
+,) %h)p ih+_ w(]rkp_e{ Pfrom 1")+,,t_qk,( _Pd _a( kat the
+peraf(_r_btlrlqripplnqope,all()(+% +_(_f+tllkjbtrai,()t, +)
,r t_aq++s 26 &II
Arbo:
rflf, s_df_ )r_ whl(.h a(tlfllt_r] t(+()l i s r_l(tl)rltP t
CrOSSCUt
A<tdt,nq or shap_r+g r)p.++rahc+rl made ,l(.rtjs_. the
w.dlh of the work ple(+ e _Jee .lhiMr ,+ ,fir'S +,in page+; 32
Dido
A non through cut wh_th produces a square s_ded
rl )ffh ()r Irohg_ _n the w()rkple(e
FeMherboatd
Adev,ce Whl{.h (an as%aM IP gu-J_r_g workple(+es
dur,nq r_p type op++raPons
Freehand
P++rformlrl_ a (.Ijl Without the USe ,J! fence (qu,dP_
_,_lrJ dl)wn or other pFoper devt(.e It+ prevent fhl_
_orkple(_ from fw_f_ncl du_,nq the Li_iilrlg opera
hOP Tw_shng of the workple(+, (.an (+akJSe ,t to t3e
thr_)wn Ot kicked ba(.k by a _ad_al Saw
Gum
Aqt,(ky _,ap hasPd ++ ++,dip from w')od pr,_d_J{ t_.
Heel
M_,al.qnmpnt<_f the, blade %eepages:'_& 26
In-Rip
P,)%_tir)r,,rlq the t3tad+_ prlrallel to th_ fer,( (, w,fh the
mOtOr toward the front of the %aw S_e iIIL|S_raf+o r_ {.in
paq_ 3_
Kerr
The am£)em_ of mater+]( removed by the blad+' pa
fhroiJgh _ll! or fhe _IoI ()roducPd hy the blade m a
norl thrtqlqh or part,alct)l
Kickback
A r_ k,n( ontr o(led qrabb+r,g an,t fhrow,nq +_f the WOrk
p et.e bark toward the operator durm_ a _lp type
oper,]flOI
Leading End
Thl' ,_rld O! the workp_PCe which dtJrlng a r_p type
operahop ,spushed rd<) the(.t+tl,nq tool f,rst
Molding
A r'un f_,t]UCJh (.t+i W h (+1_ ptodt+CeS a Spet+,al shape
,n the workp_ece used f(_r iom,ng or decoral,on

Outr)p
Push Slick
Push Bi'Jc k
_abbe:
Resin
Ripping
Revotuhons Per Minute (_FM)
(_3wblade Path
w,th e,the_ the lr,lve',,f lhp b_ld* _)r lhP oart of the,
Se_
f..1
Throw Back _
Thru.Sawing
._, _ , tf _,Q ,i,o,,it.., , €¢t ,,,,, ,h_, _I 1_ _,xt*.t, t,
Trading End
,_, 'a!L. ,
Workp*ece
POWER SUPPl. Y
Molo_ SpP(ih(ah_n_
electrical connections
POWER CORDIS WORN OR CUT OR DAMAGED
IN ANY WAY HAVEIT REPLAr_uIMMEDIATELY
i[ f . . * . * .
_2', ,4'
Gr,
_ARNING TO AVOID ELECTRICAL HAZAkDS
FIRE HAZARDS OR DAMAGE 1'O THE TOOL USE
PROPER CIRCUIT PROTECTION YOUR SAW IS
WIREOAT THE FACTORY FOR 120VOPERATION
CONNECT TOAI20V 15,AMP. BRANCHCIRCUIT*
AND USE A 1_ AMP TIME DELAY FUSE OR
CIRCUIT BREAKER IF THE MOTOR IS REWIRED
FOR 240V OPERATION CONNECT TOACIRCUIT
PROTECTED BY IS-AMP DUAL ELEMENT TIME
DELAY FUSE OR CIRCUIT BREAKER
IF NOT PROPERLY GROUNDED THIS POWER
TOOL CAN CAUSE ELECTRICAL SHOCK
PARTICULARLY WHEN USED IN DAMP LOCA.
TIONS IN PROXIMITY "O PLUMBING IF AN
ELECTRICAL SHOCK OCCURS THERE IS ALSO
THE POTENTIAL OF A SECONDARY HAZARD
SUCH AS YOUR HANDS CONTACTING THE
SAWBLAOE NOT ALL OUTLETS ARE PROPERLY
GROUNDED TO AVOID SHOCK OR FIRE. IF
/,
} PR(;N(J PLU(,
/
PI_OP_ RL v
GROUND! D
OU_LI_ • ( '
('_ROUNOt NG PRONG
i•
1'
_'.l ,l_t t t ,, * , t l _ I t I_ . *l i,,?
WARNING TO MAINTAIN PROPER TOOL GROUND
ING WHENEVER THE OUTLET YOU ARE PLAN
NING TO USE FOR THIS POWER TOOL ISOr THE
TWO PRONG TYPE DO NOT REMOVE_PAtTER
THE GROUNDING PRONG IN ANY MANNER USE
AN ADAPTER AS SHOWN AND ALWAYS CON
NECT THE GROUNDING PRONG TO KNOWN
GROUND
' _i "i* ,_r _ ],_ tl# I i _tt i'l,' i' '
l' t ' _t,,,_ i _, ,, *t, i ] iI %,_ _ _ _
,', _ i _ . .i ¸, , _ _, ,_ _ •_ , * [ '
GROUNDING tUG
ADAP'I H 1
II
Pt UG
•iji ll_ '"
MAKE SL.IR_ Tt11_ I_
('ONN_( T| D 'tO A
K NOW#4 GROUND
ZPRONG
RI( [PTA( 1!
WARNING THE ADAPTER ILLUSTRATED IS FOR
USE ONLY IF YOU ALREADY HAVE A PROPERLY
GROUNDED 2,PRONG REC;'PTACLE
ELECTRICAL CONNECTIONS
WARNIF4_ CHANGES INELFCTRICAt CONNEC
lIONS SHOULD BE MADE BY A QUALIFIED
ELECTRICIAN
1 Changing Motor Voltage
• , ,% '= ,,
+'v_" I har,_r,L] lhp %w,h tI->% t,, r It,trt_ /RV h,
,_41)V ,ir V_(P v*'r%_l m,_kp _ #Jrf,t r fh,/I ,tH rlpt _,_,
(if(l_ll _lrf'( +ir_IPl+"t
2 Connections for 120V A C
f_h t,_f
3 Connecl*on for 240V A C
QUA[ VOI rAGE SWITCH
/Z,_. \. %
i, , b•l
%, i, •1 , tl* \r,t
J. _1 ,..i il! fil,lr I|
f ) ""
li €
/
_v A_ _1l t i,_l+
1,_, %% &,'* , _'*
._, .1 •i v . 1I1*i _ _ i" I ,l it, *,
|,r tt i il I1 _ I** Irt I * ' I li Ill t
MOTOR SAFETY PROTECTION
CAUTION TO AVOID MOTOR DAMAGE THI_
MOTOR SHOULD RE BLOWN OUT OR VACUUME .,1
FREQUENTLY TO PREVENT SAWDUST L .tiLt.alP
WHICH WILL INTERFERE WITH NORMAL MJTOR
VENTILATION
,) /

i4•j
,%
,%
,%
t i ,
•,, ,,
,%
,,, ,,
WIRE SIZES
,%
Ii r,'_p
*, , 4*iI
v%
CAUTION For ¢ltculls Ihat are farther away from
_lPc Trn'_a! Service box the wirP size fTIUSI b_ IIIC reRsPd
pfoporbonafPly irt Of OPt Io dNiver ample voltagp to
ILp Saw motor
Lf _O_h, i e_._ W.'* _'le', R_qu.fJ'd
,Ampt,( an W rp (Ja(Jp i_qJr_bet)
240V L ,n_,_ 120V L,nr..
location and function of controls
-- €
€,_"
Min,. • f
,, in[
• IM¢,
p. _f •
4t" .
N_ Nr a, n
•A_ i .
contents
Plge
(_pr_*,t I_ '_afpty ii,%tt,jLt,(ir1% fl)r Pt)WPf TOoI_,
(_1,)%%1ry i)f Tprm% tr)r Wo(,dwork.rl(_ f',
[ Ip( tr,( _u _.u_Hp( tn_,n 7
A_,%_,r_q_l V and .Ah_nt_pt)* 10
)_Rr k_rl_j a_] Prp'ac.%_mhly 1 t
Al,qi_mprl! Pro(pd'_r_ _,_(J
Bas,r _,aw Op,_rat,(_ns
"[ ro_JfaP Shool,n(J
Marptenar,(,_, anrJ L_,br,r, at,,_r_
_pc (]_r__pn dt*(J A(.Ct,SS_r,pS
F_ppa rPa,ts
Pame
2ff
32
38
42
4,
4_
assembly and alignment
TOOLS NEEDED
r ,
71_ WRENCH
12 WRENCH
34 WRENCH
)4 SOCK_ T
9_6 SOCK| T
_ SOCKET
SOCKET EEI"ENS_ON
SOCREI' WRIENCN
"4E OiUM SCREWDRIVER
_2 PHILLIPS scREWDRIVER
PLIERS
t n -_
FRAMING SQUARE
PENCIL
III HEX L W_[NCH
$ 111 HEE L WR|NCH
FRAMING SQUARE MUST BE TRUE
(: :_@( k 1_ l( ( u¢&( ¥ at ,41uStf _led b_low

unpacking and preassembly
WARNING TO AVOID INJURY FROMUNEXP[CT
EDSTARTINGORELECTRICAL SHOCK DO NOT
PLUG THE POWER CORD INTO A SOURCE OF
POWER UNTIL ALL ASSEMBLY ANDALIGNMENT
STEPS ARE COMPLETE THIS CORD MUST
REMAIN UNPLUGGED WHENEVER Y("r)u ARE
WORKING ON THE SAW
Unpackrng and Checking Contents
tp,_
%
-_ ;']Atj 1'_
•ll U 'f ' '" r; "
"4 ,V_
t3t_
WARNING I_ANYPARTSAREMISSING DO NOT
,._TTEMPT TO ASSEMBLE RADIAL ARM SAW
PLUG IN THE POWER CORD OR TURN THE
SWITCH ON UNTIL THE MISSING PARTS ARE
OBTAINED AND ARE tNSTAtLEE) CORRECT[V
LOOSE PARTS LIST FOR MODEL 113 198510
I,_% _ _v_ •, I
"It ,_.'a
Qtv
°
/
t
[)
A
D
Bc
/,{
E F
G
' Aw' /
A8CD
®{j
EFG H
4
H
7_
H
'4
G
NOTE _'",_' Par1 (, Ba_ a_J As_ombly N,JtT_hi*r_,
t_,_, I[) _l,"r,t_p, f)r,r'tp,_ '_r, P,t( h haq ')_ ¢Rrt, m
XO4507488HO00
_o €::
CABINET ASSEMBLY
FOR MODEL NO. 113.198510
ASSEMBLE CABINET BEFORE
MOUNTING SAW
44 •CABINET ASSEMBLY NO. 507561
FOR MODEL NO. 113.198510
['lij, _,,, •,d_P.,lt
t,,.rt ',,_|)p.,q
,4
WARNING IF ANY PARTS ARE MISSING. OONOT
ATTEMPT TO ASSEMBLE RADIAL ARM SAW.
PLUG IN HTE POWER CORD, OR TURN TH£
SWITCH ON UNTIL THE MISSING PARTS ARE
OBTAINED AND ARE INSTALLEO CORRECTLY
DRAWER ASSEMBLY NO. 507565
FOR MODEL NO. 113.198510
B
E
I
'C
I
[ ..,. K A
_"_ " N OP
N
'_'" •J D
GG
GG
,eb
F
E
" OR S
U
%' •
Baq of Loose Part_ 15U 7_)30
lipCabm I Assembly)
Cont_rnrn,j Follow_rtq IIPmS
A,C,(rew PanHd ll_ 10_ 1
BS¢rew Pan,Ad T_, T 6 ]?x]l!
C(_Lrew PanPId 110 10x 12
[' _;_lt(,h Magnet,(
_"llrlge DOOr
/
4
1
2

k,I *
•/,
_*_.1 I _ *., !,, I*_,,, *_*
*i_ ,_*_ _ f e,.. _ , t* ,r *t¢ ire _ i f ,
P&N!
i
ir,'-
f
8_
r* ,, i, # /v ,
It _ P"*
i
•I
( Or! r_
I
14 ?0_]4
' %
SlOt PAN! I

CHECKING CABINET FOR SQUARENESS
*d! ' P
1P*
i *
,, n, J p, *t
• q I'" _ 4_'. 4
_- J.
4
, J*
_ ,• _ _, ;, i',
b I , •
inn
[_ tr, f n% r It.,, t_tr,,J r_ .1' I_ II j,_frat+_ J_.lr J
WARNING TO AVOID INJURY FROM UNEXPECT.
ED SAW OR WORK MOVEMENT. LEVELING FEET
MUST BE ADJUSTED SO THAT SAW OOES NOT
ROCK TO AVOID UNEXPFCTED CARRIAGE MOVE-
MENT. ADJUST LEVELING FEET SO THAT THE
ARM SLOPES SLIGHTLY DOWNWARO TO THE
REAR
mel_
el:
I
/
/
• H_X NUT5
LEvErING FOOt
INSTALLING DRAWERS
j/
_,t J•
i
/
/
/
%.
I
I
,j
#,
4
NOTE _)_,IPtm)np which S_de _)f { Rh_ rIPt '5 I', bP
_w_s lhp dr_wP_s _n_ the' (lOLt (R,_ bP
r.,,, ,ted on elthpr _ode
A_s_,mblP ;! rp,Ir suppod It) (h_ _,dr_ p,tnpI wdh
_r}_2) 142f}_ 1_trusshPadb_)lt5 Iockw;tshpr_
and hpx nllt_ T_ghtenntJt_S_(-urply
Rp_, $,_pport mllsI touch IOW_,r shpIf for hol_,• t_
h-_p IJp w_lh Iron! hohn$ [I
i
,1
|
JJ_,__

•',1% _ j'l ,, , p _ t_,,,t_ 4 _l *_ i _
• i , J
t#
0.
I
NOTE , :...... ÷,,,.. _, ,_,, .,, ,,.
'J ' ] •"'.1,'6_, t ' lr:l¢'_ I''_, 1' _ _ %
t
_':_'_ t I'_W_' f' Jr_I_ '_'_h r'*€[ _l_lr_tP_ I'r_ "_ _d_
m
• .
-i
em I:::
,mc
MOUNTING DOOR
1I',_ rl!#, fhp IW_ t_) dO,_r tht_¢4nS R'_J hgl_r _4
,,,f1_,r_, _(Jrjp w_lh _Jh,II,DS s('rPw_r v__r
NOTE H,r,f,_r,_ mo_nhn(_ hlng@,S rhp, zt',* makp
•jF,*J,th_r _,,,J_hy "1'_V'n_ lhf-'h,r,,_p_
•e
\
t,4z
At _
[' its, tw_ ,_' p,lf ¸ t_._ JS' _,_. _ 'Q •',,]1 ,j
"_tlpt OP *hP S,r_P ,)t thp _ _P_p¢ S_*_){[)'nI| R_IFj, rL 't
r_,Rq_pl_L 5fr_13 pl_Ip Wdh IW') _ _) .!-; • _ _ Da"
_'l(.,Sff" f')nl r 141 I_u%S hPad tjITS I,;( k_._%h_.'_
,_ ,'J h_x nuts ll) alia( Pd(_ur t,_P_PS fr tr'_ "_ _
p4npI5 _qhlPP hP_ I_tJ_ W,lh e] 7 "t, Wt'_l,i h_"
_I_L k( f Adl Jc_I _tOp pl,llp _ _P( PBS_I_ _/ w,th ph,nhpS
_( fT_*WT_rlVpF f{)f {_Ps,rP{_ (,I()5_tP
CINt|R
Supi:,(DmtM&GN| TIC
STOP Pt AT[
_,Cn! w
•e," 6 J2,30
MOUNTING SAW
I|r_)rtl IO(.)SP p_rts bag _f)64 t,n dfhp fr}llOWrng
h_lrdWarp
8 T_uSS _'lPad Bo,ls 1 4 20 x I ?
8L(_r_washpfS L xtprnill '4
R,4PX N,ds I 4 20
"_ PIpLP saw On (ab=nol SO thal holPS ,n bottom O!
Saw hne tip with hol_s qn top of f_blnPt
!Install bolts IockwRshpr_ a_$d nuts aS shown
_,ghtense_urelyus,nga 716 Wrl_rIchufsuLk_'l
NOT w. It may bP necesssry to loosen th_ Dolls
hold,ng the sk,rt to the sad_ panpI of thP L ab,net ,t th_
holPsdonut hneup Or'cernounhnqLolt,s_npla(.e
ret,_hlen cab,n_'t bolts se,_urely

ATTACHING TRIM CAPS & TRIM LEDG[
,',1_ *P,I _l_ ,If ,, _,11,_, It,p, Ir rTL If',] |_ tp,f
%'* P'_' _;1_f)' _''m_ t '' _t_ _4 '_
4 '_, t I',_'_ _ _ i'
;r 4
J
.,i
r
,,w
..r
1
/
•/
e.),al(
ATTACH ELEVATION HANDWHEEL
[rt_lall h_ndwheel _r) ffC_nl O f t_3_e as IlitJ(_r_l_d
,.J ..
INSTALLING DRAWERS
1 Shde cer_er 511de brackets SO {hey extend about
beyondtror_lOtslamd P_s_tlont_e 1re drawer
or_ botlom shrJ_'.s and er_gage reeler 5hd_
_rackels Push drawer CIosedloengagedrawc, r
slide calches
2Repeal assembly for 6 ,n_ hand 3 ,n(h ,_*awe_s
:3 Open ea{_h d_awe_ Iu Gheck drawer Slops If
drawer shales past $Io r) use a s(_rewdraver Io
bend lhe slop tab further oul on dr_lwer slide
Re_he¢ k drawer Io _nsure d_awer slo_ wo_k'_ Do
not over bend drawer slop
NOTE To remove a dr_we_ use a screwdr_vl_
tt_Ou_Jh the ,)_d_ of lhe ,_I_deto pu_.h the drawer slide
slop lab ba(,x lo free the drawer
MOUNTING MOTOR
CAU €ION Oo not attempt Io mounl the motor unld
the I)lede gulrd lind blodt have been removed
I
:€
NOT_
ALIGNMENT PROCEDURE
IMPORTANT Inorde_ Iooblmm mai,mum culling
accurllcy and safely the tollowmg sl: slips mull be
ciretul;y followed Become Ihorou_hly lamlhar w,th
these Slips Io lhll you can dllwdlys main|am your
saw 0n p_oPe¢ iIIgnmwnt The Iccu{acy o! es,ch
adlustt'neet is Ilwlyt deNndinl upon Ihe eccuricy
ol the preceedtng a,tiustmenl
Be sure IO align the saw in lhe tllCt sequence
_eScftb_d tO mlUl'e proper lligl'imenl and 4:utllng
accutllcy
l *r_,lt_ '_h],fl,,J _,,,l ,l ,t a_ ydtt{ rt_
STEP ONE
Adjusting Column Tube In Column Support
1tlevat_ ;tn(J lher_ lOWer lhP,_r_
t,),_S_r_ lt'_ f,_r _4_ b_)lt _, wah 9 _6 S(_ kel at,d
,,_tePt,_)r_ io(ati=d lhr_)_)_J!' lh_' holP_ nlh_,
,PaT L _l,r_ c_sppl)r I(ilv,_r ,_r_l[l 111_)v_ "fT1fsflt I_
(_mc)(a_ r)[_t f,¢m
I
,)
7_

r#.
if • !
i.. _,, _ • 1 _b l. ,_ _ i_
im __
NOTE
STEP TWO
LEVELING FRONT WORK TABLE
/
snug
/,
,%
I l't _ 4 ]m,_ _e_I'" I I I I J " 'I_I "" I lw t
•Ii t ._l,lto6 _, i I tI• . i
i i
. _ ,If t._i, _•,_ _p _ .. _._ i_* , .,•
H&NO[ !
NOTE
' • _,'_'v_ 'f _ _fg_ ,,_!,tt,,j, ,! _'_" t,ld .t I ._'"
/
RADIAL ARM
/-
,
45 RIGHT
t
whpll',l_r |l*lp Ir_)f_l |R_Ip h_)Rr_Jl_ h._ ,_r '_W .It ,I_
Adjt_ltm_ front feble lock handles
WARNING TO AVOID SUDDEN SLIPPAGE
BREAKAGE OR THROWING OF PARTS FRONT
TABLE BOARD LOCK HANDLE MUST LOCK
TABLE BOARDS ANO RIP FENCE SECURELY IN
PLACE
¸t'tl J_.f lh¢_ I_p_,_,_,r_ ,f_ tt,f_ , _ i,_11
J
_ HI)%pfl thP IW_) r_t ( pt•fr , _,| 1( *,r , .,4r_•| •
FII)I,_Ip thl_ _.p_( pr t(lw_rd the' ,l,al I,-lhlP t_l,Aid
Tiqh|Pr_ SDa(Im_ wqfh _ _ _f._lI t_ _)r _ kp!
|_r_]_,,,,,_,|l v|ll.lh_l(J,j|l ,r_ r,|_t_ _ I' Ifrl|,!_, _ _,
/
,/
/

STEP THREE
$qua¢inl) C_ollcul T_avel
NOTE ',. _t ,_t,,,.,., _,,,;,_ .,r_ '+, .t,
I ' I*1"_ _' Ivl _. ','1, a'P t • +h I'I" f_ "+
•tl • I*--, _] ,+_ tl +Ir tk
t,Jr I_.r
CAUTION DO n,,t overflghlert arbor nu! Use irbor
wrench 1o snug nt_l in plSce Overtsghfenmg could
dls!orl !he blitte ¢OIIJrs 4nil reuse bilge Io wobble
t.&_+ ilclf N(
W, _ ,i
i!
_,i+ +
*, _ , + +'*+
NOTE +',',. +,,+- • + +,.
,%, •,
_*+ .1_r ++ + ++ ,*, #l
• I_ '_ I|+ .•t +_I+_11 " _ +'" 'r4 '+ +,'. .*
i i
j+ ,+
+ +
,+ ,
+
J
• , _-- • _- Ull{ll I . , •
.,, .... _ J _ r+ ,_
,0+,..+. , ,. +. --
'r ,{*.grPfutlyfeh(_JhlPn upper *WO I_',+ 420_OCk+.!
_1+1 3Cr+'W$ allte_n_t,_,(Jfrom Ipft S,(IP _'+)r_(Jht
$,dP S'_ as nor tO ro_f.e a,m out Of adluStm,+'nt
nd_ Rp(.hp(.k blade Ir_v@l Adl,jSf &rm pos,t,onas
npedP"J by rp_IdluSh_g uppl_r screw S or+ly
tp10n_p_rmpo_lhon+S(Jood hcjhtpnlower I 4
20 _o(kp| $,pf screws Oo not ovprt=(_hlon
ChPck PIPv_It,p_ hsndwhppl fo r ease of rola
ho r+ If rqlahr, 9 hsnclwheP1 IS Claff,(ult rp
adlU$1 $O(ket set screw hghV'Ps$ as npeded
NOTE Thpl,f++,_f yo_J_Sawtahlpw,llbpIP-_i+,+,n++d
{'opg,_Pr,:lhly ,tyoh w,tn (r)vpr Thi_fr, n+pIRI"IP w,fr, ;I
f'lf'd p,Pr.++ *j+ +4 ,nrr_ Duywo(_d T_I_ SI_)L+*d h++
t_(.k_,d ,r pl+IL_ h)r _aSy rpplR(_pment L)_+p,)fStJ(.h a
(UvP, _,,+n_}ll_v+,yr+}utO d') RII•_Jff'n_l+rh tt,P _ t)VpI
ralhpr than y+j,jr fable lop Th,_ w,iI hplp pr_vpr, t
d_il n_ ,)f_hf+_,_/i'blad++ and _fr,k,nCJt_br(.+mj,,'_t,n_J
har(_wdrP Pla(+p ta(kS oL+t of fh_ path Ot thP _aw
b*ade
STEP FOUR
N(_OTt +,,. ' ' I '" ,['$
j ••
#, ' ,,,
,%
• +, + +_.
', I j
DO noI
P+T_fpp f_' frail+ _t++'kt +I _P! +++'i,+ % lip ++Ik
bib,p! h) k h+Ir_dlP +r_in_jpx the, r_ )f,lr rp
,I + Ipl[ ?nt_ rp_()( li *hp bpvPl h)( k r,ar_,!tP
IJp( h_( W _l,_l"m++P t+J_a ,n + hl+iflp • ,_+t
c,q,_+_+_ {+,laDl_, +pft_ rn f+_$IPp,( i arld rpppal
F
+, :
!.
• L . t
• _A_ I
/, /
(
&
•_,r++ +" II| il I`
I+_ kltl lO*J IIW
Iii,
llff3l+ 1
[fl.t41
+II_|
i i I ll_ v 041
r'
' j

# '11
ST_P FIVE
_qua*,ng Bled_. tu Rt D F@nce
NOTE
t•,
+,
. + +, ,
• m*w
I , J...
+
• ,i , + +
,+*, +
+i
4, .
i jl ,' 1_,
,p ,*•.,
• .•. ,,,
., , + .+*. i
;, •;+,+ .+
,11 i ,i
++. 1
(,
._.....++_+
,7
I
i
911
+•
1
NOTE "+
*+* ,
+,
.% • , , .
I,• I
4 + i , ,f + • ,,
+ ,
+ j ', , . .,_,
•[
Iv
,*, +
+, [ , L,+•.+J
f
i
NOT_
+
+• • A
+•
J .<_ "1 .•
( __y)
f
E
IJ_vli! Heel &dlu41tm_t
l+,t ..+,,.,,+• _ I_,,,, ar.,1 t+_+w_,_t t,'_.t+ +'_
fit' _'t_ _+I + ,_I,+ _1_r+ ,rt, l_+r +I t,lJ +
+xir 11_, I I ._.+ ill ,++++'t _ _ + ,,)+I
t. _.I + I+ Apt l_l_ r_,_ ,jl lh_+ r+, .+ ._ _.+[ [' ,t .+ t
.J_. _, ÷ /
t
J
i_ • ._
t
• f
°-_
_,, +' + + [ 1*++ _+" ,'*¢'.+ ,+I*_
I l_l rI_ _,_,.#p_ t.r r WI_ 1_4:,
,,_ ,,j+_,© _•,t+:r],,¢.
e++
STEP SiX
Inltllllng IIIIKle Gulird lind Adlulflng ArdI.K|ckb_ck
Plwl$ lind $1_ell_er
I lr, l,)( k |hf + _W_vf+ rIr)f bh;It_r_Ip _Ir_ r ,lAtin" tl_
l_l,lr}++ ,r+|++ lh_ lhl I_I )l;r_,t,+)r' I • k thp _w vpI
AH_IRKKRAI_ _AW|r_ _[• _;
TABL|

_lhrJl, thl, r_ilf padq]r vi,ft_ f,n_pr_ ,,nt,l fht, _'*IP ' ,1
lhl _l_ri,,i,le,, rP,,l_, flush villh It,i, r_|_ fpf,( i'
r _,r_u(j bolh PLItS 4q_ImM it t) SilrPa,_P r and
¢p( hlJ( kalltirlrT_Pr_l
d ' _prPader ahqn_, w,fr_ I{,]r_( t' _|l_ Jb,a{JP t,q_,tp,
w,lh vwr¢,r_( l' Tin,| ra,c,P anl, k,( k{3a(k {,prPa,J_'_
Ll|), qliard ,1rid ,_hclhlp_, w,r,q _r ,f,_
4_vI#_l_p fl_ Io( k har_(|lp r'io_'P blaC_P a'A,ly fr(liT_
ANTIKICKSA(., R SPREADER
WING SCNEW TAll
......Io
FSNCE
_,r>.,
RUIIIP|R PAD FENCE ANTIKICRllACR IAA
ANTIRICRI_CK PAWLS
% _, _, ir_()_)_' _,IFf_, haq _497 ,)lair thp bill
(_,lar,J rPa r hi mp_,r Jpall _r_ J ,r,_ta '
ii
STEP SEVEN
Inltlllmg Ind Adluitlng Rip Still Indicators
NOTE _+, "I _,,,_"" ,t' lp '"t*'"_a'""tP"_'"_t" t'_'
_l( ( ra¢ v l_lw_' '1' _'( I filpa_,ufi_rllpl_l_ bp|_ppr TM bia(Jp
,n|,_ *hp (_tJ _ !qll' p,,,.,| _ ,, L_}( k lh_ S_V vP i.,r
Ii,_d.p
b adp ap,] 'oC {' r,p i,)( i bar, dip
4ArliilS| tl,iI ,,p s(.alp ._,d-ahl_ by S',d.r_g ,ir_| '
,ndlr at_)r Imp r_ad_ _+._ChPS _)'_ fhp ,j_ pp, '_# lhP
fw_ ,)_i| r,p %(.aIPsasilitj_lra|_(l (')ul r,p _r arp_
_ h)f. alp_l On Ipf| $1dp of a rl_
{H_l()(k r pIO(k hand_p and m()ve _iad_, away
It,jr,1 len(t. Unlo(.k lh_ _wl_pi har_dl_a,_d tola|P
lhp r_rul,)r h) thel_ FllPpus,hOP LO(_ |h_._,vpI
I,)( k hat, dip
Adllist in lip s{ ale ir d,(.a|or iiocaled oil r,_lhl
$tdP O! jfml by Si'(_'nQ unt '1 ,r_dtcato' hne reads
0 ir_r hps
location and function of controls
WARNING FOR YOUR OWN SAFE'rY ALWAYS
LOCK THE SWITCH OFF WHEN SAWISNOTIN
USE REMOVE KEY AND KEEP IT IN ASAFE
PLACE ALSO IN THE EVENT OF A POWER
FAILURE TURN SWITCH OFF LOCK tT AND
REMOVE THE KEY THIS WILL PREVENT THE
SAW FROM STARTING UP AGAIN WHEN THE
POWER COMES BACK ON
WARNING THE SAWBLADE OADO OR CUTTING
TOOL MUST BE REMOVED FROM THE SAW
ARBOR BEFORE USING THE ACCESSORY SHAFT.
NEVER OPERATE THE SAW WITH CUTTING
TOOLS (II'ICLUOING SANDING ACCESSORIES)
INSTAL LEO ON BOTHENOSOF THE SAWARBOR
MAKE SURE THE UNUSEO ARBOR IS ALWAYS
COVERED BY AGUARD ACAP. OR THE ARM
¼
¢,
I I

Depth of Cut (Ere•ilion)
% ,, _1, I t rlt %_ ,Jr ,1 i_pe trip saw [_lil if,
t ( 'L k*,h_ ' *,!1, , ht.im, thl. ht.l{t*.
•Ji h'r, , • *'v _1 ']trir">' ,St ''_ ,t (_, *
r_'['llq*'h,v' #llvh.P'{_'i @1,1, ',1,%1 i_ ,*_,r
2 Angle of Cut (Mder)
I', I,_ 'J' 1, i., _ y.I h , , [xp÷- _,, r,f l, r,l_ ,_
wv 1, .._ ..r; '"i' [ _f,, I¢,,,r t t% "'._. (-r.tlt_.- I'
EABmple /,'_ •_ i n,_. i, ,*,1 - t, ,rl, •
NOTE _ _1,_,', _< ,_' ,bt, l_ n,, _, .1-I
3Yoke Swivel (Ripping)
f '** m, %lie ,* ' l*'s [ ' ht"dr I .tn_
I' l.l_ "I. * t, [' i_, t.. 1, _l t.._
h,Iril 4h I f ,%1., _tl, lhl y "k*
4 Rtp Position Lock
t ?,l i[. i* i. _ . { ' _,n ,h_r'I .m
fr_. I' '* ,i * I_ *
_.lr_.+ t ft.hl .1 ' lt_'; I"i _hl '_' Ir _l
i•
5 Blade Angle (Bevel)
aA_,ngip t,_vel it)[k h_dle ,_ u_Pd 1__pgula,
p*'_,,hOnin_ and mdi,x,nq uf tht' rnvhlr h,
I" )_,de the des,red SaW bla+p _t)ev_l, anqle
t_ The, bp¢_,l IO(k hand1 e conht)l Sthl ar_gula_
il,)_ hr)n ijr thp riloh)r with _e_pe( t to h_)rlt_)ntal
The bevel i(,r k handle dutnmahCally Ind_les
lhl_ mt)t,)_ at O 45 and 90 51,d_, thp bevPI
_{ Ii hap,lip It) the far right Whip posit,nninq
tt..blad#_ {het_ rpIpas_l Alany,)thpr[)oSll,Or
,t lr_es nL)t I_nclacIP
• _lt_ bev!_l I(j( kh_l_dl_ also) h)( i_ thp rnL)h_l _ )
I hi' y,lkt' tthpr trip ml,! }r l_ lq at,y [)ri_ltlt)¢,
Plill Ipcpr h_ rqhl t) ¢#l{*a%p arid I_. ,%h { i _l_t t ,
\
_WIvl kt O(
4
\
\\
, ,. .ll_ r t %,,1|, ji, , tl. ir
t
..+< :,--,
j;f
,1 WARNING THIS LOCKING FEATURE IS
PROVIDED TO HELP eRE VENT UNAUTHOR,
IZI£O USE OF YOUR SAW ALWAYS REMOVE
rile KEY ANO KEEP IT IN A SAFE PLACE
TO REMOVE KEY HOLD THUMB ON END
OF LEVER TO KEEP SWITCH IN OFF
POSITION ANO PULL KEY STRAIGHT OUT
7 Accessory Shift
U_,P only the IOIIOW_ncI _el.o-_mendl,d a((,es
_)l,e!_ {_llll (hu(k Sandlnq drtim and RoulPr
acJapte_
CAUTION The slwbllde, dido. or culling Iool
mull be removed from the saw arbor before
using the eccessofy shell. NEVER operete the
SlW wllh culling fools (including sending lcces-
solles) Instilled on both ends of Ihe sew lrbor ACCESSORY SHAFT

6Blade Guard and Anti-Kickback'Spreader
Assembly - Positioning for Ripping
WARNIN_ NEVICR POSITION THE GUARD OR
ANTI-KICKBACK/SPREAUER ASqlrMBLY WITH
THE SAW RUNNING NEVER POSITION THE AN it-
KICKBACK/SPREADER ASSEMBLY BY GRASPING
THE PAWLS OR SPREADER TO MAINTAIN
SPREADER ALIGNMENT, USE Tt- L TAB LOCATED
ON THE ANTI-KICKBACK BAR
The bldde guard ,S pos,i,oned by h_oseP,nq
fhp guard ( I_m[. S(.'PW a,_d +olat.ncl the gtJ_rd
SOfhalthp n_)(_p iLJ{,t(iParslheworkp,e(Pa._
This adiustmenl Msnecessary to
,_"_ ft'_ l_hP_pPratur tr,)m a( ( 'dP rhlilv+ t_r
hip, t,,_r
_t + pPrat,_,
bTh+ ar + _ * khdq _ _nd sprPade, as%+,r_b y•
a.t..+_.tab i¸ t_ d(, (in m)dale tn_- th,_ _. p'_.. +
'',[ p"L] lhp aPh k,(.kb*t(k and S[,'PadP+
a'_.+'n'b'# • [J{_("t"Ir_Pdhy l,+(,sprr _ thp Wr.q
9( '_'_ 4r'd ._,fh the fad prov,dPd _r)_,t,OP nq
*+ p _'t, _,(kb_, k ag_Jsprp.Idpr a_)sp_,b,y t+r_t
tp,p pa_ S aS_.un,e dl3p_()x,r_al_ ly thP [J_)Sf,r)-
st1+J_"'_ "_,qhl_'r_the W r_q S(.rP'h
M.J_P _t,rP h rtr_aI w,tho_jl _aw rur_n,r'g
befL_rP S*_'f,nq lhp (tit thal +he a_l, k.(.kba( k
pawi,_ w,IISi(_p ak+f kba(k OPcp,t has Slartpd
It)Serf "##+_rkp,ece alongside sprPader ur_de •
i)i_ff,r_,_.f_)I_}_wls byapljrlJac h,_g pawls ,r.*Pc
fPe_Id,recho rPuShwor_.p.=,_Ps_arpl¢,_ 'he
d,re(t,+)r__f a k,r khd( k+oppos,te d,re(t,on of
feed, l_PadluSt pawl_ _fthey clO not St'.p tnP
k,(.kba(.k mot,o nby b,t,ng +nto the w(_rkp_ece
If the leadmg edge O_ Ihe workpmce does not
teed smoothly urder the pawls the spreader
may be set too deer)iv Loosen the wag screw
raise the spreader Shghtly rehghten the _: raw
"ec h- ck wotkp_ece m-feed and kickback pawl
fncbon
These Kllusfmenfs when properly made will
i) Reduce posslblllfy of klckblcks by prevent
_g the kerr from (:losing Gn the sawblade
2_ Prevent "wrong-way feed*' "Wrong.way
feed" IS feeding the workplace when the
_;awblade iS ma rip posdlon - _tO the OUt
feed s_dP of the cutlmg tool /sawblade
dado molding head etc )thes_deconta.n
mg Ihe anh.k_Ckba(:k paw!s spreader lh_s
can be extremely hazardous because the
Sawblade may grab the work p_ece and throw
41
,t v,olentl¢ t_ward the nose 9f the gua,d
Imleed side of lhe lotJ]) possibly puli,p_J
y_+ur handwlih_t before you can reat.t ,_ep
{::)anger label on outfeed s,de of the guard
jUSI helow ihe dust elbow
"Wrong-way feed" dlf fers from kickback' A
"kickback" _Sgenerated by the s_des lone O,
boihl of Ihe teeth because ot bmd,ng
between the fence (heetl p_nchmg of the
s,des of the sawblade Ifad_,re Io use
lpreader) adul! blade and,or inadequate
set of teeth of sawblade
3) Acf el ipIIrtllll guIrd regard,ng acodental
contact with the sawblade at the outteed
s+de when nppmg
For orollOuflll_l the anh.keckback and spreader
assembly is positioned by loosening wing screw
With the tab prowded posd_on the anb-k_ckba_k
spreaders assembly unhl the pawls lust clear the
workp,e_e or fence which ever _s h*gher
basic saw operation
WARNING TO AVOID MISTAKES THAT COULD
CAUSE SERIOUS PERMANENT INJURY. OBSERVE
ALL Tile FOL| OWING INSTRUCTIONS IN ADDI-
TION TO "THOSE ON PAGES 2-6,
E}a_'( _,dW ()peraIl+jrlo are S_, ir'_ar_led _n _,_ (alp
q,,r,+,_, ,+xpla,nPd and +ll,,_*rated , '_ f{)_l'_W_lq
par,l<_r aphc_
NOTE f_Pte_ h, p_aqraph._ .ndP, L_,_at,,_r' a+,l
;,,,,, hr)r, Of G_)ntr+)l', f,)r ,IhJSi'dt,on% and tJ+,_,( r,[
CUTTING A KER r "4 THE WORK TABLE
AND FENCE
NOTE "r, h 'if _'f. , ]_/ !'_ li+" _l/'l it'" ''f'_fh+''+ +
''_ J+'_lh VfV'_'*_i:t ,v+'r tf_,f_,_r tla_,h _.t t
f,_ • + _ ,I',I _. f r +..]%y rP[1',|r _,ItI+ ,,_ , J_, _, .+ +j
,1 _+ ,, .ii,, ,_ y, _ ,l, 11 _ +tt:r _l ,' ttt ivf ,
_, ,+ _. _ t_,i , i..,,)_ _t _ ,t + ,t
i,_+ i_ ' l, _ii. ,¸
i_p_ It,++ arn <,+, tP,_f th+, hI+1,J+ Ii)_ + i+_l,') I_'
r+,,Ir table _oh, The, rl+a, + lh_+J sh,)ij d h+' ,I ttt,+
\'V. rk "rahI+, paq_, 7I. if fr,)nt t+lhI+, {_jv+,r _,
,.' I_+"h:,L]i ").th,lt_!v,S t" '+ t'',_hP +' +"+t_b +
D _rd t {_¢pr
I ,( k the tlp IQ( _+hilt'dip and + t1+_( k t_J ,T_,_IS++%,+r++
E ,+¢r+aqp ,_ IO(ke(1 it, pla_P Phlq +)a_ +r t_,1
_r<_i_llded ()tJth?l I%PP 5e(hun titled I i_+, t,._a,
(f_rlnp( tion 5 paL)+:, 7l
4:,,_,i.)rt the yplhlw k_'v ,r tr, s,w,h 1"_r4r '| _+hiI+.
h)Id r'_ th+, y,j_+, q,tr_rlif' tt+,r, lh+, %w'h tj+
_. _'+',th th+, m()i,,r r)f hjr' th_ _+l_'_at,,jr' helr_.JI+
tt'r(_){ kW,SPt+li+)W_:t th++'*+awbladpi _'1+'r+
,f iljSt <Ljt _, rtithe, TahI+, +i[_<J_,malP;y _ _/ f
•16 ,r_(_h ,Jpp[, _h h. h()Id,r_ q tht y_Jkl h,lr'd,+
a,lr_w,lhrr_t)t,)' _)f,II,ir, tlnh++r k thf, r,p_,l( ktl,+,.,Jh
ar,'J th++r t+h" thf' "_,)tur t+itward aF1d _,,.f t+> th+i
fr,,r,f Stop<_,Ithl, a,m Th,')wHlalhJWlhphla,JPl,,
( ,Jtlhr_._Ql'ithpfpr t. Pa_+dlilcula _)hal, +WkP,f ir
thptahlp1 _2to' 161n(+hdee;Jt_pr( ,,d*'fl)'lh+'
blatJP< utl,r_+.; €,+mpletely tt,r<j_j<)h the. w'_,k p_P( +
NOTE A kprf w,ll hdv+,t,)t)+', t ,,'l,+th*'hlh,l p,,.>r fr,
tIl,|k t'+; ,|rl_ thh+ ,,jtt,r+q 'i" ,.It, ,,, +<,,r,(} th _ p, ,
il+,t,lr++
\\
REQUIREMENTS FOR CROSSCUTTING
TYPE OPERATIONS

Lrl( k _Pt '_W_vflr I,,( k hanoi P I_lk*' %hli' t'_ f r'"
_v t,FJ | _[I r,r] (it thrl,win q ,if _ Irk_np( P% fg,,, k* '
I nr!* _hp ftzl'( t_ n_ h,_)h Irl%|rtll ,:1 h+_ht_r %.. tt' a'
(ili+,_ 4¢ .+r %,|_ _) *r, i+ i,,# * +,'h+, tIf 1,
t* v,*i 3* I +,r,_jft_ _,t .1 'I' v if+ + ,t_ r,
+,_ 1+ ! +++ir ,l tr t_++ ,,,i_,+ tt r i,+ ¢
,I' [k [_P_+ih ,Ir'_+l' _t_,, _, + ,v+,,tt,+ %, +
OPERATION NO. 1 -CRUSSCUT
Ir_% ,,l I,_%Ihl, ll_ + _ %% f _,lW.I 'J _, r'l_% lh+
WArNiNG YOU WILL NOTICE THAT WHEN PULL.
ING THE SAW BLADE TOWARD YOU DURING
CROSSCUTTING THE BLADE TENDS TO FEED
ITSELF THROUGH THE WORKPIECE TillS IS
DUE I'O THE ROTATION OF THE IILADE TO
CONTROL THIS YOU SHOULD DEVELOP THE
HABIT HOLDING YOUR RIGHT FOREARM IN LINE
WITH THE ARM OF THE SAW THROUGHOUT THE
CUT ALSO MAKE SURE THE CARRIAGE BEAR-
INGS ARE ADJUSTED PROPERLY SO CARRIAGE
DOESN'T TRAVEL TOO FREELY
OPERATION NO. 2- MITER CROSSCUT
It+l_ W,df r' )f ,+1ivtJ'kl_,!.(t ,if ._r y ar_gl+, _(f,pr th..tr' _]
90 '%t+i,larP' (tJ! The 4l_ mzt_lr atlgl_, ISapr)pul;Ir
+)f++ _ill( _'t_,, h()ard_ _ ill If+ 4_ (._r' h(+ a_(,rf+blp_
(It lrjrm _ _0 (.olnpr I+)r prodlH ,r_q R5qtlare (+r
• ('
II _
L•
_k _". ,+i l llAvll
',_tt lltll 10 AI LItTI
\
x
.L ++ ++: I
L
+.
L" •
,F +. _ •I+÷
++ .\
'_+,+' II i 41
_. ul rRlvlt
+.
type())( I
IS[[ ITEM 10 AT L|FTi
t
ro , •
_S
t_ o_
rectangular irame The radial arm is Set tO a desired
angle of cut _w+vel and bevel _ettmgs at 0°and
locked Thewutkp_ecebelngt;UtlSposlhonedand
held firmly against the fence and the carriage pulled
forward along the radial arm lusl far enough to
cumplete the cut _arrlageshouIdthenbereturned
to tile full rear position andlocked Allow the $1w
blade to come to a atop betore removing the work
piece from 'he saw table
OPERATION NO. 3 - BEVEL CROSSCUT
Bevel cros$culhng is the process of sawmg at 90 +
t_qilar¢,) Rc(oas the width 0 !aWOrkplece with lhe
saw blade set to an angle other than 90 °to ihe table
The radual arm 3nd yoke are mdexed al 0° and
lo{ked ser_tJrely )n pla!:e _he beve$ is _et to ,he
desired angle of ,_ut and IOCk(:d The workp_ece
bemq _ut is pos_t+oned and held hrmly against the
fen(.e and the (,afrla_e IS pulled torwRrd arorig Ihp
radial arm lust tar enough tO complete the ("ut The
(a,,lagP should then b_" returned to Ihe (u il rPar
p,,_,,h_lnandIo_ked Al'owlhesawbladelo(,ometo
d_to_' before rpmOvmg the work p*e_ es fr um the saw
table \
OPERATION NO. 4 -
COMPOUND CROSSCUT
(+"()rllpollnd CrOSSCUt tS the comblpah_ n _f m,tPr art'1
bevel crosscut ThPradlalarm andlhPangl++of lhe
bladearesettoproducethedes,redcul theyOite_s
mdexPd at O" and IO_ked The wolf*piece _ po_'
t0onerJ ;|nd held tlrmly agam$1 tr,e ter,_,e arid t_e
carrrage Is pulled forward along lhe radial arm lU':,t
fa_enought0complelether.ut Thecarrrageshould
then be returned to the full rear position and Iocked
_,ll()w Ihe blade to (,ome IOa StOp before rpmoy_ng
thP workpte(,es from the saw fable
i
REQUIREMENT WHEN RIPPING
(Operabons 5 and 61
WARNING: TO AVOIO MISTAKES THAT COULD
CAUSE SERIOUS PERMANENT INJURY. OBSERVE
ALL THE FOLLOWING INSTRUCTIONS IN ADDI.
TION TO THOSE ON PAGES 2-11,
1 M_ke sure lhal thflbladelssharp correctly se'
and undam_lged
2Lock the rip lock handte (See page 29 )
3 lock the radial arm at the 0° po,_dton
4 Make sure the workpiece is kept in firm contact
w,th Ihe fence and the table The edge of the
board against the feqce musl be straight and will
r_ol catch Jn kerfs in the t_nce NEMFR RIP
FRE EHAND Iw_thoul a+d of tence) /

5Properly Set the antl-k_kback and c,preader
assembly Obsen'e {N_T RUCT IONS,_n paragraph
Posd,omng guard and ant, _,(kbmk and
spreader assembly for r_pp_ng under LO(at or,
and F,,n_-hr_n n! C,,nlr_l_ paQ p28
F t._ . . * ._ . ** *, * . i ,
. ?)
_'? ,t
A,
r*•,_ *t I,'h_'_ t_'_JJ ''* 1 1'I t'
_t .% _'_ _ 'hE P+.+ I _,*_ [ i _ .
_J '_ !' !'. _ "* tt_ ; ! '_, " , _' *
34
SLIGHTLY LESS THAN
THICKNESS OF WOMKPIECE
UP TO 3t"
_, 4S'NOICN
/
PUSH STICK
NOTE All a*menl_onl In inch_l
. , . ,%
Make Ihe a:Jxlhery fence,
• i,%
}, ,_ , *,, t. ]
•-t2
44
)n PL _WO ){)
I
•¢
" t
I
rFN f
_0
r Makelhepushblock ,' , ,; , ,
BF PARALLfk
• 12
} I PLVW()OD
12 i i_Xl
%
;t 2
IA - )@PL VWOOD, "¢'
)0 )8
NOTE Al'_.m_ns,O_.. nn(h_.
NOTE ".
• i
,,%
_i% ..t, ,, ,, , , , t _t, [ *
NOTE *.,,,, ,. ;t,,, s ,|,1.,," .,_,. ,,_ ;-,_.'.
I _ i_, t•,, t_,_ htr Jh. It ttll_ _,_]q_ _I the. _,1_ _ ,
*,. _ _ ti, , ej. _t., t _ r, f )
'L [ ' ; ,, t , _ _ )v% I''),"
+_ .* 'I.' ] ' I _, * +, r tI )_ ' ', ,
_t_ f m r k_ _h
OPERATION NO. 5 -
OUT-RIPPING AND IN-RIPPING
1' t,t_ _1iv,_+ _,'_ ftt,*p ,th,| +,t _V, ', ,t
,% _ t,'_ t_. I,_,.t_ • | r,,,,)_ t ._t, i,,It t , !,l_
%,, [Iir,_ ,_ _,r _ I' _,W,l ir_, _,I r, _t t_,_
WARNING IF THE WORKPIECE IS WARPED OO
NOT ATTEMPT TO MAKE A CUT IF THE WORK
PIECE WOBBLES OR ROTATES ON THE TABLE
IT (;OULO BIND ANO KICKBACK
,_; ,,r |%_ f 1, _, El i, _,
t, _ !,r "_r T T_ I_ _4 t_+ t _# I _ _
*,, _ _, , fl tz, f+t, t'_]t t t +I['
CN HIPPING
,, _,_ _,t .J,rH t,,,r 'v,l'_t_d (r,J_, ,l_,(,v+' h,lrt tt,,
I,*rt,tl,%l,]fh_,w,,rkl)_ t , _, ,% f+,_l fr _t_, thl, r,(_h_ t, I,,,_
OUT RIPPING
•-)
o
,me it,| I,_(

_r '. HATION N,O _' • B,:VEL RIPPING
[+e r I .r 'I" ,I d, h. the <+I_ t.lr _ rf.1, ,•h+ t_ t I
tp,. J+- ,*.! ,_+ ,+,' ,i_'* ,t _t* +' , , _ _ !' +++' !
DADOING
1.t +
k'
'+' * ' ' * .' ' ,' I * 'P +,f' '_+ _ % %t _ JPP|'.'+
t _ .1+ _;4 * i ',t,_ _ ,t ¸
1.4,=. ,_ I_ + 4,_ '! +* ,
+
+[ * • + ,141 ' '' . *, I., ,_ _,
MOLDING
,_, , ,, qh+_a+ +
EDGING
l+_,l++r rrl+ +,r • t_tt,p ,ph 4_)pe _.r_..t_, ,_,,
Fo, ,S+" ufthe rnO,d,ng head(.+, drum sander wdh sew
arbur vp_t,¢a ' ,tie rear table requ,re_ an opening
r'ext I,, ,ea rface of f+_nceJ f.jr arbo_ clearan(+e CuI
<)per',r_g d _e(.lly belOW arbor ,n vprfl(.al p()S_hor_
Oper'.ng ShOuld be
- - 3" 3 I/2"
REAR TABLE " , I
I
. 16.1/2" .
_' 'lOW ,.111 +te_ + tJIl,_ed (jr +ni_I+ r ',_DP
4 A' _)I,v oftr'qmlabP reads as h)lh)vt+S Fu, Sup _,de use Of the dado (l'lhIll_l) Or mold,r,g
head ,_ the ,n r,p poslhon I0_ Ste the des,red poslhon
on thea_eaand h._ck the rlplock handle Lower the
a,m,ntothefencevet/slowl_' remove onlyasmuch
mgter_al fron'_ 1he fence 85 ,S Pecessery This will
prov,de maJ_,mum suppor_ for lhe workpler..e
WARNING NEVER USE A DAOO HEAD OR MOLD.
ING HEAD WITH THE lAW ARBOR VERTICAL
WITHOUT INSTALLING AND ADJUSTING A
MOLDING HEAD/DADO GUARD. FOR TOP-SIDE
DADOING OR MOLDING INBTALL AND ADJUST
THE SAWBLADE GUARD AND ANTI-KICKBACK
ABIIEMDLY FOR RIPPING OR (,ROSSCUTTING
AS APPROPRIATE
•_ilj
€_.
AUXILIARY FENCE FOR MOLDING
To t, Se the molding head *dh the arm +n •he 0"
(to_Js('uI position an auxiliary fence must be used
WARNING' IF THE AUXILIARY FENCE IS NOT
USED WHEN THE SAW ARM IS IN THE 0'+CROSS-
CUT POSITION, THE MOLDING HEAD CANNOT
BE LOCATED BEHIND THE FENCE FOR SAFE
AND PROPER OPERATION
Make lhe au_(,bary fence from apiece of +,not free
p+nP CuIfolhefollow,ngdlmens+ons
'I _, 11 ,
II i.l |,k _dl II 't FINal
/
/T.-.--
mill f&ll_ I
€IIOPI" *I_I+I_//
/
/
FOItow the ,nSlrt+ChOnS thai are _.onla,r_ed ,r, aP
Owner +. Marltjat furn,shPd wdh IP_P _O.d,n_ hoed
,jr use of lhe mold_n_ head or dr,Jr_ _at_der w,lh _,a_<
arb++_r verf.cal the rear lable reqLJ,res an ,_per_,ng
,n_+xf t,j rPar Iareof fen(if for arb+)¢ Ll_+tlr.mln(+o _,j_
_pp_,r_g dire(fly bpIow arbor ,n v_,rt,(.aE p,)_,t,r_,
(_per ,r,g _t_ou_d bP --3" 3 1/2 '
REAR TABLE - • J
21" -
_hhe r' using the acr.essorv shall the 9oard sa_
blade dado mold head o r 3the, (. utl,ng rod Irn uSl bp
removed fromthesawarbo r beto'e ,s,n_lhea((es
sOry shatT Neve_operalefhpsaw wdhcutf,ngloots
+including sandlngaccessor_es bufhngwheelsar, d
_r,II (.hu(.kl _nstalled Or_ bolh ends o t fhp S,_w arbor
T0 use lhp aCCtPSSOry shaf! _'_ the vertica I pos,t,O n,I
IS,_*,¢_ssry Iosw_velfhemoIor 90 belore bevPt,ng
fhe motor SO fhe accessory shaf! ts ,r_ v,_rh[at
pOS'f'O P -'"S ,S dOPe SO the b,ade a'bo r _,u be
po$,I,Onpd u_'de r Ihe 3 ,n_ IO' ma x.++n_,nn D,olet. l,O r' fo
fheol_eralo r As,nuslraIPd
adjustments to compensate for wear
ADJUSTING BEVEL LOCK LEVER
T hp I_'h+r13OSp 0 _ th, s Fpvpr 'S In In( k lh+P rf_oIO ' _lf ,_ny
bPvt,l .4+lqlp Ar_ adl_JSfmPnt ,S requ,,od,t lhP rn(d,),
La_" hPoa_,,ly moved by handwhe r_levPr _l._tkpd )'
bp_.+)l Ii)(k Ipvpr of Ipr% m,nlma Ire_,star_(e whP '_
r'nt)_n_ lever I_ She lO_.ked po$,hl)r" T o r_akP th,_
,_dlt_SImpPl
1_Pml)vP roD{Or SuppOrt (t]vPf
"){)S,f,O nmolo_ af alJpro_l+mately _0 bPvplaf_q e
arid to(_k bevel Io_k Ipv_r
fW,th a 3 4 socket hghIer, •he 1 213 hex nut
1_)( •ted al the ha( kOf lhe mOIr)r Support (asI_+_(_
UnI,l the mot, +(. arl nO longer be easdy moved by
hand DO nr)l OVe_l_ghten
4 LJnlO(. k bevel Io( k lever and ran're motor In ar+y of
the five index pcsd,ons If lhe mcIot does r_ol
,r_dpxse(urplythp_dl_+$1r'np, 'SlOOt,ght Loosen
1,9 13hpx r_tl ur_I,I be_ellr_,x p_n seats properly

AJluSl'nent tS C(Irnl3'ete whe'" t)_th i JI W,Pq a'_,1
i'_dpi,Pqfur_(t_UnS_lrP_Vl)rk r_Ipr,+I_prIv R_p,It P
r_l_ 5tjppl)rf COver
ADJUSTING SWIVEL LOCK HANDLE
Th_s handle provICieS ,S trIctlot_ lock iOe_.wi_n the
upper face of the yoke a.d the botlom face of Ihe
cart*age It shoulCl (_,lm,nate any play Of rotat,on
belween these two p_ldS when locked An adluslment
,$ required ,f the yoke can be easily rotated by hand
when hamdle is lOCked or yoke lOCk handle Offers
_n,-,ma I re_,istance when mOvlPg hancIle to lhe
IocIKedl_s,l,On TO make thlSadll.stm_'-t
'W,th a'_)wrenchOr socket remove$,x (615 _6
1B hpx head tapp,pg S(_'eWS an_ separatf, frack
from ar_," a_ i)lustrate_J
_'rip yOkPaSSerr'_IV f_('r_fla(k KPPI,_,%,r.agP r,
. _P wv fh Ira_(k t,r hl r p io(N m_. r, ar,sm (ipa,%
3Wth a15 16wr."_hO, So_i_l='tt,ghtef lhe5 8 ''
_lpa rut Ut_t_l max,mum pfforl ,S reQu,red tO plac p
yOkp JO(W "_andle ,r_ lh!, locked pos,t,O I_
4UPlOCW yokelock handleaPdsw,vely, oketoar •
ur.rdexed pOSd,On Returr_ yoke to a- .ndex_d
pOS,l,o n Iflheyoke doesno1mclex securely the
adjustmenl ,s too tight Loosen 5 8 _ he_ nu_
unl.I swore I ,ndex p,n seats properly
5Adjustment ,S complele wt'en both sock ng ar, d
,ndexing function5 are work,ng properly
6 SI.dP Cart,age onto track _tart.ng w,th r,p IO(k
mectiantsm Keep carriage,nhn ewlthtfacku_1 ,i
a IIOfthebearmgSarE,O_thelraCk Becare#ulnot
fo catch the wipers on the edge of lhe fra(k
7Re attach track to arm using S,x 161_ _6 _Shex
head tapping screws
ADJUSTING ARM TO COLUMN
W_th the miter lock handle unlo(_ked and _n the
unlndexed poslhon the arm Should fit snugly I0 the
column tube and not allow any vernier I movement if
you (.an move the end of the arm up and down arid
edJuStment es needed
1 W_th a e2 phdhps screwdriver remove two screws
and the fear arm cover as iltust.sted
_' W_th s 9/t6 inch wrench Of socket hghten evePly
the top two 3, 8- 16 hex headtappmgscrews The
bottom two screws sho,JId also be hghtened
evenly but not as t*ght aS the top screws
3 Th=s adiu_tmePt is c0{r3ct when the arm moves
firmly wdhout v_rhcal movement
4 Re-install the _ear arm cover
• I
°"p/
-,. \
\
_ol
V_ _.
O
€
"{Eo
(,J
ADJUSTING CARRIAGE BEARINGS
'i)+ .if _ .,I', ,If_ li'i'h*'Ir _.i _,1'_'- I ",_*_,
_,i il ,r llll ii%i ¢ f,,_i,_ , + f_I,_ i_*,,i, '
,I _'_ J_ '.; .°*.' 't._,, ,1. .'"_ Both
screws should be ldlusted in equal Imounl to
maintain blade squareness table in Ihe rip
positions
4 _4 ,,J Till, hpa,J ,_th*, p_ .*., t_,, %, ,_,_% t_._, ,
et6 ill |,,)%,{,,)r'a' J_l'f,qh_ ]I _h_, ,_%
(n _*,[_#,af lhf, fp%f Ill ,( f,,_ _f|, _|_'-1[ r_),p,_ at* v_ t'
%_'v_'f_*Iyr_,rJ,j(pfhp I f_. ,,ff_r_fl,}*k ai.,_b* ,I_,'_%
/-
MITER LOCK ADJUSTMENT
_r,, ,, ti,tl [k ti.lr Jt ,[>lWlf*" •4,J, ,',*l_'_ _' '1
I'a'_,ly milvl'_ l)y har_lwr_P 'i,,( il..J ,r, •i' ,' .' J* x,. !
p., ,t ,),, th*, !,_'ir'W,Pq ,t(J'=i%lilil_llt r_i,%# t't ",t _l
'+%4,_+_lht a,_,h+a r,, ' '> Jt'_*"Jl, )_,i. ,, I' '_ _ I.,'
\