Craftsman 125.04267621-3 User manual

Operator's Manual
CRR_T_MRN
5 Gallon Wet/Dry Vacuum
Model No. 125.04267621-3
CAUTION: Before using this
product, read this manual and
follow all its Safety Rules
and Operating Instructions.
• Safety
•Assembly
•Operation
•Maintenance
•Parts
•Espa_ol - pagina 16
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com

Warranty
CRAFTSMAN EVOLV ONE YEAR LiMiTED WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted against any
defects in material or workmanship. With proof of purchase, a defective product
will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web site:
www.craftsman.corn
This warranty does not cover filters, hose or attachments, which are
expendable parts that can wear out from normal use within the warranty period.
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
IT
READ AND UNDERSTAND ALL
iNSTRUCTiONS BEFORE USING THiS
VACUUM
Read and understand this owner's manual and
all labels on the Wet/Dry Vacuum cleaner before
operating. Safety is a combination of common
sense, staying alert and knowing how your
vacuum works. Use this Wet/Dry Vac only as
described in this manual. To reduce the risk of
personal injury or damage to your Wet/Dry Vac,
use only Craftsman recommended accessories.
For household use only
I$
FOR FUTURE REFERENCE.
When using an electrical appliance, basic
precautions should always be followed
including the following:
WARNING:
RiSK OF FIRE, ELECTRIC SHOCK OR iNJURY:
• Do not run vac unattended.
•Do not vacuum, or use this Wet/Dry Vac
near flammable liquids, gases, or
explosive vapors like gasoline or other
fuels, lighter fluids, cleaners, oil-based
paints, natural gas, hydrogen, or explosive
dusts like coal dust, magnesium dust,
grain dust, or gun power. Sparks inside 2
T
the motor can ignite flammable vapors or
dust.
• Do not vacuum anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.
• Keep cord away from heated surfaces.
• Do not expose to rain. Store indoors.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
• Do not use with damaged cord, plug or
other parts.
• If vac is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, take it to a service
dealer for inspection and repair before
using it again.
• Do not pull or carry by cord, use cord as
handle, close a door on cord, or pull cord
around sharp edges or corners.
• Do not run Wet/Dry Vac over cord.
• Do not handle plug or the Wet/Dry Vac
with wet hands.
• To reduce the risk of health hazards from
vapors or dusts, do not vacuum toxic
materials.
• Do not store near hazardous materials.
• Do not use this Wet/Dry Vac with a torn
filter or without the filter installed except
when vacuuming liquids as described in
the operation section of this manual.

• Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
• To reduce the risk of injury from
accidental starting, unplug power cord
before changing or cleaning filter.
• Do not leave Wet/Dry Vac unattended
when plugged in. Unplug from outlet
when not in use and before servicing.
• Turn off Wet/Dry Vac before unplugging.
• Do not put any object into ventilation
openings. Do not vacuum with any
ventilation openings blocked; keep free of
dust, lint, hair or anything that may reduce
air flow.
• Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
• To reduce the risk of falls, use extra care
when cleaning on stairs.
When using as blower:
• Direct air discharge only at work area.
• Do not use Wet/Dry Vac as a sprayer.
• Do not direct air at bystanders.
• Keep children away when blowing.
• Wear safety goggles.
Observe the following warnings that
appear on the motor housing of your Vac:
DOUBLE INSULATED
GROUNDING NOT REQUIRED.
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS.
f Ak WARNING --'_
, For your own safety, read and
understand owner's manual.
,, Do not allow unit to be in operation if
unattended.
,, Do not pick up hot ashes, coals,
toxic, flammable or other hazardous
materials.
,, Do not use around explosive liquids
_.or vapors. ..j
,A WARNING: To reduce the risk of
electric shock - do not expose to rain -
store indoors.
i,dk WARNING: When using blower:
Wear safety goggles labeled "ANSI
Z87.1" on the package. Turn unit off
before setting on ground or releasing
grasp of handle. Electric shock could
occur if used on wet surfaces. Direct
tool discharge only at work area.
Do not direct discharge at bystanders.
Keep children away.
Extension cords
When using an extension cord with your Wet/Dry Vac refer to the following table to
determine the required A.W.G. (American Wire Gauge) wire size. Before using the cleaner
make sure the power cord and extension cord are in good working condition. Make repairs
or replacements before using the vacuum cleaner. Only use extension cords that are rated
for outdoor use.
110V-120V
Amps
0-6
7-10
11-12
13-16
25 Feet 150 Feet
7.5 Meters 45.7 Meters
18
18
16
14
Length of Extension Cord
50 Feet 100 Feet
15.25 Meters 30.5 Meters
A.W.G Wire Size
16 16
16 14
16 14
12
14
12
12
Not recommended
3

introduction
This Wet/Dry Vac is intended for house-
hold use. It may be used for vacuuming of
wet or dry media and may be used as a
blower.
Read this operator's manual to familiarize
yourself with the product features and to
understand the specific usage of your new
Wet/Dry Vac.
Table of Contents
Section Page
Warranty ............................................. 2
Important Safety Instructions ............ 2
Extension cords ............................... 3
Introduction ...................................... 4
Table of Contents ............................ 4
Assembly ............................................. 5
Carton Contents List ....................... 5
Unpacking Your Wet/dry
Vacuum & General Assembly ........... 6
Polarized Plug .................................. 6
Operation ............................................. 7
Vacuuming Dry Materials ................. 7
Vacuuming Liquids ........................... 8
Blowing Feature ............................... 9
Section Page
Maintenance ......................................... 10
Emptying The Tank ........................... 10
Installing & Cleaning Reusable
Cloth Filter .......................................... 10
Installing A Replacement Cartridge
Filter ................................................... 11
Installing & Cleaning Foam Sleeve
Filter ................................................... 12
Cleaning And Disinfecting The
Wet/Dry Vac ....................................... 12
Storage ............................................... 12
Troubleshooting .................................... 13
Repair Parts .......................................... 14
4

Assembly
Remove entire contents of carton. Check
each item against the carton contents list.
if any parts are missing or damaged,
return the unit to the retailer of purchase,
or call 1-800-469-4663 for part replacement.
Carton contents lists
Key
A
B
C
D
E
F
G
H
I
J
K
Description .................... Qty.
Vac Assembly ................. 1
Hose ............................... 1
Handle ............................. 1
Casters .......................... 4
Extention Wands .............. 3
Floor Brush/Squeegee ...... 1
Filter Retainer Nut ............ 1
Dust Filter ..................... 1
Foam Sleeve Filter ........... 1
Bag with 2 Screws ......... 1
Operator's Manual .......... 1
A
C
(_ !)
(:_ !)
(_ _)
D
G H I J K
Handle
On/Off Switch
Power Head
Vacuum Pod
Caster
Blower Port
Accessory Storage
Latch
Collection Tank
Power Cord
5

Assembly (continued)
A Philips head screw driver is required.
,_ WARNING" Do not plug in power
cord to power outlet, make sure plug
is disconnected before assembling
the Wet/Dry Vac.
UNPACKING YOUR WET/DRY
VACUUM & GENERAL ASSEMBLY
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Undo the latches. (Fig. 2)
3. Lift the power head off the collection tank.
(Fig. 3)
4. Remove the contents from inside the
collection tank; make sure you have all
contents as listed on page 5. (Fig. 4)
5. Insert the casters into the socket on to
bottom of the collection tank and apply
pressure until castors snap into place.
(Fig. 5)
6. Insert the handle into the slots located
on the top of the power head and
secure it with the screws provided. Do
not over tighten the screws. (Fig. 6)
7. Place the power head back on the
collection tank, aligning the top section
with the latches, and snap into place.
(Fig. 7)
8. insert the locking end of the hose into
the port on the collection tank and turn
to lock in to place. (Fig. 8)
9. Choose the desired accessories and
insert onto the end of the hose. (Fig. 9)
Polarized Plug
To reduce the risk of electrical shock,
this appliance has a polarized plug (one
with the blade wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper outlet.
Do not change the plug in any way.
Double insulation [D-]eliminates the need
for the three wire grounded power cord
and grounded power supply system.
6

Operation
Vacuuming Dry Materials
,,_WARNING: Be sure to read, understand and apply all the information in the
Important Safety Instructions section at the beginning of this operator's
manual. Do not vacuum in areas with flammable gases, vapors, or explosive
dusts in the air. Flammable gases or vapors include but are not limited to;
lighter fluid, solvent type cleaners, oil-base paints, gasoline, alcohol or
aerosol sprays. Explosive dusts include but are not limited to; coal,
magnesium, grain or gun powder. To reduce the risk of health hazards from
vapors or dust, do not vacuum toxic materials.
"C7
,
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. For dry vacuuming, the filter must
be installed correctly. To verify, please
refer to Installing Reusable Cloth Filter
on page 10.
3. Place the power head section back on
the collectin tank, and secure it in place
using the latches. (Fig. 4)
4. Insert the larger end of the hose into the
vacuum port on the collectin tank. Push
the required attachment onto the free
end of the hose or extension. (Fig. 5)
5. Plug the power cord into the outlet.
(Fig.6)
6. Turn the motor on by pressing the
switch to the 'l' (ON) position and begin
vacuuming. (Fig. 7)
.Once you have completed vacuuming,
flip the switch to the 'O' (OFF) position
and unplug the power cord from the outlet.
0 = OFF I= ON
DO NOT USE THE CLOTH FILTER
FOR LIQUID VACUUMING.
CAUTION: Do not vacuum drywall dust,
fireplace soot or ash with standard Wet/Dry
filter. This is very fine dust which will not
be captured by the filter and may cause
damage to motor. When vacuuming fine
dust use a fine dust filter (sold separately).
7

Operation (continued)
Vacuuming Liquids
,_ WARNING: Be sure to read, understand and apply all the information in the
Important Safety Instructions section at the beginning of this operator's manual.
Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the
air. Flammable gases or vapors include but are not limited to; lighter fluid,
solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays.
Explosive dusts include but are not limited to; Coal, magnesium, grain or gun
powder. To reduce the risk of health hazards from vapors or dust, do not
vacuum toxic materials.
,d& WARNING: Do not plug in power cord to power outlet, make sure plug is
disconnected before assembling the Wet/Dry Vac.
.
.
Verify that the power cord is
disconnected from the outlet. (Fig. 1)
Remove reusable cloth filter as shown in
Removing and Cleaning Cloth Filter
on page 10. Then install the foam sleeve
filter as shown in Installing Foam Sleeve
Filter on page 12 and secure power
head back on the collection tank.
DO NOT USE THE REUSABLE CLOTH
FILTER FOR LIQUID VACUUMING.
3. Fit the desired nozzle to the vacuum
hose. (Fig. 3)
4. Verify that the switch is in the 'O' OFF
position before plugging the power cord
into the outlet. (Fig. 4)
5. Turn the motor on by pressing the
switch to the '1' ON position. (Fig. 5)
6. After use, empty the collection tank,
clean and dry the inside and outside
before storage. (Fig. 6)
valve that stops the suction action when
the collection tank reaches its maximum
capacity. You will notice an increase in
motor speed. When this happens, turn off
the machine, disconnect from power
supply, and drain the liquid into a suitable
receptacle or drain. To continue
vacuuming, refit the collection tank with the
drain cap. After wet vacuuming, turn the
machine off and remove plug from power
supply. Empty the collection tank, clean
and dry the inside and outside before
storage.
REMEMBER! The foam filter must be
removed after wet vacuuming, and a
reusable cloth filter must be installed before
dry vacuuming again.
IMPORTANT! When vacuuming large
quantities of liquids, do not immerse the
nozzle completely in the liquid; leave a gap
at the tip of the nozzle opening to allow air
inflow. The machine is fitted with a float
8

Operation
Blowing Feature (continued)
,A WARNING" Always wear safety goggles complying with ANSI Z87.1 (or in
Canada, CSAZ94.3) before using blower.
Keep bystanders clear from blowing debris.
Wear a dust mask if blowing creates dust that might be inhaled.
This Wet/Dry Vac has blowing capabilities.
To use the blower feature follow the
instructions listed.
1. Verify that the power cord is
disconnected from the outlet. (Fig.l)
2. Make sure the collection tank is empty
before using as a blower.
3. Remove hose from the vacuum port.
4. Insert the larger end of the hose into the
blowing port on the back side of the
power head. (Fig. 2)
5. Fit the desired attachment to the hose.
(Fig. 3)
6. Ensure the power switch is turned OFF
and plug into the power supply. (Fig. 4)
7. Before turning ON the vac, firmly hold
the loose end of the hose. Turn the
motor on by pressing the switch to the 'l'
ON position. (Fig. 5)
9

Maintenance
Emptyingthe CollectionTank
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Disconnect the hose from the vacuum.
(Fig. 2)
3. Undo the latches and remove the power
head from the collection tank. (Fig. 3)
4. Clear all dirt or debris from the collection
tank and hose. (Fig. 4)
5. Clean or replace the filters. (Fig. 5)
See filter cleaning instructions on
page 11-12.
6. Check the hose, attachments, and
power cord to verify that they have not
been damaged.
NOTICE! The filter included is made of
high quality material designed to stop small
dust particles. The filter should be used for
dry pick-up only. A dry filter is necessary
to pick up dust. If the dust filter is wet, it
will clog quickly and be very difficult to
clean. Handle the filter carefully when
removing it for cleaning and replacing it.
Check the filters for tears or small holes, a
small hole can let dust pass through and
out of the cleaner. Do not use a filter with
holes or tears, replace it immediately.
Installing & Cleaning Reusable Cloth FUter
Installing Reusable Cloth Filter
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Remove power head and place in the
upside down position.
3. Slide reusable cloth filter down over the
filter cage making sure the whole cage
is covered. (Fig. 2 & 3)
4. Replace and lock the power head on to
the collection tank.
Removing and Cleaning Cloth Filter
1. With the removed power head in the
upside down position.
2. Carefully remove the reusable cloth filter
from the filter cage. (Fig. 4) Clean the
filter by gently tapping or brushing dirt
off. Cleaning should not be done
indoors in living areas.
3. Use a mild soap and water solution to
wash reusable cloth filter and rinse with
clean water. (Fig. 5)
4. Allow the wet filter to air dry for 24 hours
before installing onto the filter cage.
10

Maintenance (continued)
iMPORTANT! Clean or change the dust
filter regularly for best performance.
ALWAYS USE DUST FILTER FOR DRY
VACUUMING. If the machine is used with-
out the dust filter, the motor will burn out
and the warranty will be voided. Always
keep spare filters on-hand.
InstallingaReplacement Cartridge Filter
WARNING: Always disconnect
the plug from the power outlet
before removing the power head
from the collection tank.
This vacuum cleaner is designed to use
Craftsman cartridge filters.
1. Carefully slide the Craftsman cartridge
filter over the filter cage and press
down on the outside edge of the filter
until the rubber gasket on the bottom of
the filter fits securely around the base
of the filter cage and against the lid.
(Fig. 1)
2. Align the small center hole in the top of
the filter over the post on the filter cage.
Press firmly on top of the filter near the
post to allow the filter to seat over the
post. (Fig. 2)
3. To secure filter, put on retainer nut and
turn clockwise to tighten until snug.
(Fig. 3)
11

Maintenance (continued)
Installing & Cleaning Foam Sleeve Filter
Installing Foam Sleeve Filter
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Remove power head and place in
upside down position. Follow
instructions to remove cloth filter.
3. Carefully slide foam sleeve filter
down over the filter cage making sure
the whole cage is covered. (Fig. 2 & 3)
4. Replace the power head onto the
collectin tank.
Cleaning and Disinfecting the
Wet/Dry Vac
To keep your Wet/Dry Vac looking its best,
clean the outside with a cloth dampened
with warm water and mild soap.
To clean the collection tank:
1. Dump debris out.
2. Wash collection tank thoroughly with
warm water and mild soap.
3. Wipe out with dry cloth.
Cleaning Foam Sleeve Filter
1. With the removed power head in the
upside down position, carefully
remove foam sleeve filter. (Fig. 4)
2. Use a mild soap and water solution to
wash foam sleeve filter and rinse with
clean water. (Fig. 5)
3. Allow filter to air dry before installing and
using again.
Storage
Before storing your Vac, the collection tank
should be emptied and cleaned. The cord
should be wrapped around the unit and the
hose should be stored as described in this
manual. Accessories should be kept in the
same area as the Vac so they can be
readily available. The Vac should be stored
indoors.
Before prolonged storage or as needed
(i.e., waste water pick up) the collection tank
should be disinfected.
To disinfect the collection tank:
1. Pour 1 gallon of water and 1 teaspoon
chlorine bleach into the collection tank.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the collection tank.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the collection tank.
12

Troubleshooting
ALVV_-_,I'_N|NLT: TO REDUCE THE RiSK OF ELECTRIC SHOCK-UNPLUG
BEFORE TROUBLESHOOTING.
Problem Possible Causes Corrective Action
Vacuum wiii not operate 1) No power supply. 1) Check power supply - cord,
breakers, fuses.
2) Faulty power cord. 2) Unplug and check the power
cord. If damaged, have it
repaired by a professional.
3) Collection tank is fuji. 3) Empty collection tank.
4) Switch in the wrong position 4) Press the ON '1'button on
the power head.
Dust comes out from motor cover. 1) Attach or replace the
reusable cloth filter.
Reduced efficiency and
motor/speed vibration.
1) The reusable cloth filter is
missing or damaged.
1) There is a blockage in the
nozzle, hose, or the tank
inlet. The dust filter is
clogged by fine dust.
1) Check nozzle, hose and
tank inlets for blockage.
Take off the filter and clean it.
Or install new filter.
13

Repair Parts 125.04267621-3 5 Gallon Wet/Dry Vac
Always order by part number, not by key number. Always mention the model number when ordering parts.
The model number is found on the serial plate located on the vacuum. To order parts, call 1=800=469=4663.
,_, WARNING: Servicing of double-insulated wet/dry vacuumm with
double-insulated wet/dry vacuum, two systems of insulation are provided instead
of grounding. No grounding means is provided on a double-insulated appliance,
nor should a means for grounding be added. Servicing a double insulated
wet/dry vacuum requires extreme care and knowledge of the system, and should
be done only by qualified service personnel. Replacement parts for a
double-insulated wet/dry vacuum must be identical to the parts they replace.
Your double-insulated wet/dry vac is marked with the words 'double insulated' and
the symbol _ (square within a square) may also be marked on the appliance.
I'-'1
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
Part Number
VJ01PF.10.01
VJA5P0.10.01
TVQTZS.03.YZ
VJ51PF.10.04
FV9543.11.01
FV9644.01.00
VJA5P0.20.01
TVQTJL.01.00
VJA7BZ.20.D6.01
FV7822.04.00.18
FV7902.01.01
FV7701.01.00
FV9502.04.00
Description
Handle
Power Head Assembly
Float & Filter Cage
Float & Filter Ca_ e
Filter Retainer Nut
Dust Filter
Collection Tank
Caster
Operator's Manual
Hose
Extension Wands
2-in1 Floor Brush/Squeegee
Foam Sleeve Filter
Quantity_
1
1
1
1
1
1
1
4
1
1
3
1
1
14

Repair Parts (continued)
5 Gallon Wet/Dry Vac
1
511
C ! °
6
7
C! ,
12
15

Manual Del Usuario
CRR_T_MRN
Aspiradora Mojado/Seco
de 5 Galones
Model No. 125.04267621-3
PRECAUCION" Antes de usar este
producto, lea este manual y siga
todas las Reglas de Seguridad y
las Instrucciones.
• Seguridad
•Ensamblaje
•Recogida
•Mantenimiento
•Partes
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
16

Garantia
GARANTIA COMPLETA DE UN ANO CRAFTSMAN @
POR UN ANO desde el dia de compra, este producto es garantizado contra
cualquier defecto en el material u obra. Un producto defectuoso sera remplazado
sin ningun cargo.
Para mas detalles de la cobertura de garantia y obtener un remplazo gratis, visite la
pagina web www.craftsman.corn
Esta garantia no cubre los filtros,manguera o accesorios, los cuales son partes
prescindibles que se pueden gastar con el uso normal en el periodo de la garantia.
Esta garantia es cancelada si el producto es usado alguna vez rnientras se
proporcionan servicios comerciales o si es rentada a otra persona.
Esta garantia le confiere austed derechos legales especificos, yes posible usted
que usted tenga tambien otros derechos que varian de estado aestado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
INSTBUCCIONE$DE$EGU I
Lea y entienda todas las instrucciones antes
de usar esta aspiradora
Lea y entienda el manual del usuario y
todas las etiquetas en la aspiradora
mojado/seco antes de utilizar. La seguridad
es una combinaci6n de sentido comQn, hay
que permanecer alerta y saber como su
aspiradora trabaja. Utilizar esta aspiradora
mojado/seco solamente segL_n Io descrito
en este manual. Para reducir el riesgo de
da_os corporales o de da_o a su
aspiradora mojado/seco, utilice solamente
los accesorios recomendados Craftsman®.
Para Uso Domestico Solamente.
GUARDEESTEMANUAl,
PARA REFERENCIA EN EL FUTURO.
Cuando use un aparato el6ctrico, siempre
debe de seguir las precauciones basicas
incluyendo las siguientes:
ADVERrENCIA:
REDUCIR EL RiESGO DE FUEGO, SACUDIDA
ELE_CTRICA O DE LESION:
• No deje la aspiradora desatendida
cuando este desenchufada.
• No limpie con la aspiradora, o utilice esta
aspiradora mojado/seco cerca de liquidos
inflamables, gases, o vapores explosivos
como la gasolina u otros combustibles,
liquido de butano, limpiadores, pinturas a 17
base de aceite, gas natural, hidr6geno, o
explosivos como el polvo de carb6n, el
polvo de magnesio, el polvo de grano, o
p61vora. Las chispas dentro del motor
pueden encender vapores inflamables o
polvos combustibles.
• No aspire objetos que estan encendidos o
echando humo, por ejemplo cigarrillos,
f6sforos, o las cenizas calientes.
• Mantenga el cord6n el6ctrico lejos de
superficies calientes.
• No exponga a la Iluvia. AImacene en
interiores.
• No desenchufe tirando del cord6n. Para
desenchufar, agarrare el enchufe, no el
cord6n.
• No utilice con el cord6n, el enchufe u
otras piezas da_adas.
• Si su aspiradora mojado/seco no esta
trabajando como debe, hay piezas que
faltan, se ha caido o se ha
da_ado, ha sido dejada la intemperie, o ha
caido en el agua, devuelvala a un centro
de servicio independiente.
• No tire ni Ileve por el cable, ni utilice el
cord6n de uso como manija, no cierre
puertas sobre el cord6n, o le de tirones
alrededor de bordes o de esquinas filosas.
• No pase la aspiradora mojado/seco
encima de su cord6n el6ctrico.
• No toque el enchufe o la aspiradora
mojado/seco con las manos mojadas.

• Para reducir el riesgo de peligros para la
salud pot vapores o polvo, no aspire
materiales t6xicos.
• No utilice ni almacene cerca de materiales
peligrosos.
• No utilice esta aspiradora mojado/seco
con un filtro rasgado o sin el filtro instalado
excepto al limpiar liquidos con la
aspiradora seg0n Io descrito en la secci6n
de la operaci6n de este manual.
• No utilice como juguete. La maxima
atenci6n es necesaria cuando sea
utilizada por ni_os o cerca de 6stos.
• Para reducir el riesgo de lesiones debido
a un arranque accidental, desenchufe el
cord6n el6ctrico antes de cambiar o de
limpiar el filtro.
• No deje la aspiradora mojado/seco
desatendida cuando este conectada a un
tomacorriente. Desenchufe de la corriente
el6ctrica cuando no este siendo utilizada
y antes de darle servicio de ajustes y
reparaciones.
• Apague su aspiradora mojado/seco antes
de desenchufar.
• No ponga ning0n objeto en las aberturas
de la ventilaci6n. No utilice la aspiradora
con ninguna de las aberturas de la
ventilaci6n bloqueadas; mantenga libre de
polvo, pelusa, cabellos o cualquier cosa
que pueda reducir el flujo de aire.
• Mantenga el cabello, ropa suelta, dedos,
y todas las partes del cuerpo lejos de
aberturas y de piezas m6viles.
• Para reducir el riesgo de caidas, utilice
cuidado adicional al limpiar en las
escaleras.
CORDON DE EXTENSION
Observe las siguientes advertencias que
aparecen en la cubierta del motor de su
aspiradora.
_ AISLAMIENTO DOBLE - NO REQUIERE
UN SISTEMA DE CONEXION A TIERRA
SEPARADO - UTILICE SOLAMENTE
PIEZAS DE REPUESTO IDI_NTICAS.
f,A ADVERTENCIA:_
,, Para su propia seguridad, lea y
entienda el manual del usuario.
,, No tenga en marcha la aspiradora
desatendida.
,, No recoja cenizas calientes, carbones,
materiales t6xicos, inflamables u otros
materiales peligrosos.
,, No utilize alrededor de liquidos o de
x,_apores explosivos. ,j
,A ADVERTENCIA: Para reducir el
riesgo de sacudidas electricas no
exponga a la Iluvia. Almacene en
interiores.
,_& ADVERTENClA:Cuando use el
soplador: use lentes de seguridad
etiquetados como "ANSI Z87.1" en el
paquete. Apague la unidad antes de
ponerla en el suelo o al soltar el mango.
Una sacudida electrica puede ocurrir si
es usado en superficies mojadas. Dirija
la descarga de aire hacia el area de trabajo.
No dirija el aire hacia las personas que
est6n presentes. Mantenga a los ni_os lejos
AI utilizar un cord6n de extensi6n con su aspiradora mojado/seco refi6rase a la siguiente
tabla para determinar el tama_o requerido del cord6n de A.W.G. Antes de usar la
aspiradora asegQrese de que el cord6n el6ctrico y el cord6n de la extensi6n estan en
buenas condiciones para hacer el trabajo. Haga las reparaciones o los reemplazos antes
de usar la aspiradora. Unicamente use cordones de extensi6n con capacidad nominal
para uso a la intemperie.
110V-120V
Amps
0-6
7-10
11-12
13-16
Longitud del cord6n de extensi6n
25 Pies 150 Pies
7.5 Metros 45.7 Metros
18
18
16
14
50 Pies 100 Pies
15.25 Metros 30.5 Metros
A.W.G Tama_o del cord6n
16 16
16 14
16 14
12 18
14
12
12
No se recomienda

Introducci6n
Esta aspiradora de Mojado/Seco fue hecha
para el uso de hogar. Puede ser usara para
aspirar medios hOmedos o secosy puede set
usada como un soplador.
Lea este manual del usuario para
familiarizarse con el producto y sus
caracteristicas y para entender el uso
especifico de su nueva Aspiradora de
Mojado/Seco.
Indice
Seccion P_gina
Garanfia ............................................... 17
InstruccionesDe Seguridad Importantes..... 17
Cord6n De Extensi6n ............................ 18
Introducci6n ........................................... 19
Indice ..................................................... 19
Ensamblaje ............................................ 20
Lista De Contenido ............................. 20
Desempaque De Su aspiradora
Y Ensamblaje ..................................... 21
Enchufe Polarizado ........................... 21
Recogida .............................................. 22
Aspirando Liquidos ............................ 22
Aspirando Materials Secos ............... 23
Caractedsticas Del Soplador ............. 24
Secci6n P_gina
Mantenimiento ..................................... 25
Vaciando El Contenedor ................... 25
Instalaci6n y Limpieza Del
Filtro De Tela Reusable ............... 25
Instalando y Reemplazando
Con Un Fitro de Cartucho ................ 26
Instalaci6n y Limpieza Del Filtro
De Esponja ....................................... 27
Limpiando y Desinfectando La
Aspiradora de Mojado/Seco ............. 27
Almacenamiento ............................... 27
Diagnostico .......................................... 28
Piezas De Repuesto ............................. 29
19

Ensamblaje
Sacar el contenido del cart6n. Compruebe
cada arficulo contra la lista de contenido.
Si alguna parte esta perdida o daSada,
regrese la unidad a la tienda donde la
compro, o Ilame al 1-800-469-4663 para
el reemplazamiento de la parte.
Lista De Contenido
Clave
A
B
C
D
E
F
G
H
I
J
K
Descripci6n ........................... Cant.
Ensamblaje De La Aspiradora ...1
Manguera .............................. 1
Manija ..................................... 1
Ruedecilla ............................. 4
Tubos Extensores ................... 3
Cepillo 2-enl Con Escurridor .....1
Retenedor De Filtro .................. 1
Filtro De Tela ........................ 1
Filtro De Esponja ....................... 1
Bolsa Con 2 Tornillos .............. 1
Manual Del Usuario .................. 1
q
A
C
G H
(_ 4)
(:_ !)
(_ _)
I
D
J K
Mango
Interruptor
Motor Portal Del Soplador
Almacenamiento De
Accesorios
Asas
Portal De Aspirar
Envase
Ruedecilla
Cord6n
EI6ctrico
2O