Crate&Barrel 9’ MARKET UMBRELLA User manual

COMPONENTS
1 A) Fit umbrella cover (sold separately) over umbrella
frame as shown. Tuck each end of frame into correspond-
ing pocket of cover.
B) Attach finial to top of umbrella assembly. Turn finial
clockwise to secure.
ASSEMBLY
A B
NOTE: Make sure eyelet of finial is
aligned with the inset nut on top of
umbrella frame.
Made in Indonesia - r04 Page 1 of 2
Thank you for purchasing the 9’ Market Umbrella.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
9’ MARKET UMBRELLA
1 - finial
1 - umbrella frame
1 - umbrella cover
(sold separately)
umbrella frame umbrella cover finial
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com

Made in Indonesia - r04 Page 2 of 2
2 Remove knob from base assembly as shown. With the
assistance of another adult, fit pole of umbrella assembly into
corresponding hole of base assembly (sold separately) as
shown. Re-attach knob and turn clockwise to secure.
9’ MARKET UMBRELLA
3 Pull down on pulley cords to raise umbrella at desired
height.
4 Insert pin into pole of assembly to secure umbrella.
Assembly is now complete.
umbrella
assembly
base
assembly
(sold separately)
pulley
cords
pin
knob
Customer Service 800.967.6696 |Latest instructions available at www.crateandbarrel.com
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.