manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Crearoma
  6. •
  7. Accessories
  8. •
  9. Crearoma Airing6-S User manual

Crearoma Airing6-S User manual

Attached Warranty Card
Please keep the Instruction and the warranty card carefully for
further reference.
Please read all instructions before using the machine.
Ⅰ.Cautions (The following basic safety precautions should be always complied with)
Avoid casualties and property loss, please always follow the attentions as the following.
May cause electric shock
or fire hazard.
Warning May cause personal injury or
property damage
Note
Ⅱ.Specification
Parameter
Model:Airing6-S
Voltage:12V
Power:5W
Capacity:800ml
Weight:2.0KG
Coverage:500~550m3
Size:269(L)X110(W)X203(H)mm
Model:Airing6-M
Voltage:12V
Power:11W
Capacity:800ml
Weight:2.2KG
Coverage:800~1200m³
Size:269(L)X110(W)X203(H)mm
Model:Airing6-L
Voltage:12V
Power:13W
Capacity:800ml
Weight:2.3KG
Coverage:2000~3000m³
Size:269(L)X110(W)X203(H)mm
Atomizer
One-time
inner stopper
Fragrance
oil bottle
Approved Certificate: CE、FCC、RoHS, CNAS and so on.
Ⅲ. Instruction
Application Place: Hotel、4S Car store、Brand Shop、Bar、Public Area and so on.
Ⅳ. Schematic diagram of connecting air-conditioning duct
Installing
1.Do not use unsafe plug or power.
2.Do not install the device at the
place where children can touch.
3.Do not install the device at the
place where can not bear strength
and prone result in falling and
collapsing.
4.Do not tilt the device.
5.Keep the device away from fire
and heat source, prohibit to store
flammable and explosive materials
around the device.
6.Except for the atomizer, the
housing material is not resistant to
corrosion.
7.Do not use device in high
temperature or wet environment.
8.Do not use inflammable,
explosive, corrosive and other
hazardous solvents work with the
device.
Prohibition Necessary
Installing
1.Ensure the firmness of installation
area.
2.Install the device in a ventilative
and adequate space.
3.Do not block the sprayer by hand
or other obstructions when the
device is working.
4.Do not spill water or conductive,
corrosive liquid on the device
surface or fall inside of the device.
5.Do not operate device without
stopping. Suggested average daily
usage time should not exceed 14
hours, and the third level is
recommended.
6.Cut off the power in extreme
weather environment.
Outlet duct or air
conditioning duct
Tube
Aroma diffuser
W / B
S
S
277
10
P /
1.APP Operation Introduction
Ⅴ. Operation Introduction
Air conditioning tube
1.Provide free technical solutions and installation process guidance.
2.Provide free online FAQ consultation and scent-marketing suggestion.
Ⅷ. After-sales Service
Ⅸ. The equipment warranty and precautions
1.The equipment warranty period is 12 months (from the date of sale).
2.Please provide the warranty card,Invoice or other provement which can prove the
equipment was ordered in our company to enjoy the free maintenance.
3.The human error or other wrong operation cause the fault not belong to the scope of
warranty, and will not be accepted to provide free maintenance.
Please clean the equipment periodically,suggest 2-3 months in 1 circle , so that it can work
under best condition.
Please cut off the power when cleaning, also do not use wet hand to operate it directly, in
case of electric shock and injury.
Name Quantity Name Quantity
Aroma diffuser
Adapter
Cap
Key
Pneumatic fittings
Screws (including plastic
expansion tube)
Manual
Warranty card
Bottle sealing gasket
Mounting strip
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
2PC
2PC
1.Long-term non-use
(1) Please turn off and cut off the power then roll up the power cord.
(2) Clean the filter components.
(3) Place the deodorant package which contains activated carbon in the device or package, to
prevent residual substances in the equipment produce odor.
(4) Please equip the machine with the dust cover, placed in the shade, ventilative place.
Ⅶ.Accessories and spare parts
Ⅵ.Accessories and spare parts
Under the normal working interface,long press to enter the working time and frequency setting
for the whole week, press “ ” button to select the setting time period. press “ ” button to
set the displacement. After finishing, press “ ” button to confirm the setting and exit.
Under the normal working interface, long press the “ ” button to enter the device sleep
state (off state), and long press again to start the machine normally.
Under the normal interface, press “ ” and “ ” buttons at the same time to enter the
password setting. After the setting is completed, confirm and exit the interface.
After the device has no operation and enters standby mode, it needs to be entered password
again.
Under the normal working interface, long press “ ” button to turn off or turn on the fan
function setting.
1.There are two indicators :
On the left is a monochrome indicator. When no essential oil is
detected, it lights up in yellow and blinks continuously; on the
right is a two-color indicator (blue, green). During the working
period, the green light is on and the blue light is on for long time
when machine is beyond working time.
The device has four buttons : “ ” is the return button“ ”
is confirmation button, “ ” is the increasing button and “ ”
is the shift button.
2.Buttons operation:
Under the normal working interface, press “ ” and “ ” buttons at the same time to enter the
password setting interface.
3.Under the normal working interface, press “ ” and “ ” buttons at the same time to turn on/off
the essential oil detection function.
ENT
ENT
ENT
4.Under the normal working interface, press “ ” button to adjust the concentration level A,B and C.
5.Under the normal working interface, press “ ” and “ ” buttons at the same time to enter local
time setting interface.
6.Under the normal working interface, press “ ” button to enter the working time and frequency
setting interface.
7.Under the normal working interface, long press “ ” button to turn on/off the fan.
8.Under the normal working interface, long press “ ” button to turn off the machine.
Factory Reset:
Under the normal working interface, firstly, press the “ ” and “ ” buttons at the same time until
the interface show YES/NO, then let your hand go. Secondly ,operate “ ” to choose YES then press
“ ” button to confirm it and finish the setting.
ENT
ENT
Enter
Back
Add
Shift
2.Stand-alone version operation instruction
2.Button operation instruction:
Under the normal working interface, press “ ” and “ ” buttons at the same time, the
factory settings can be restored until the display shows the full display and then release the
button.
Under the normal working interface, press “ ” and “ ” buttons at the same time to turn
on/off the essential oil detection function.(if the indicator is lighting up in yellow ,press “ ”
and “ ” buttons to close the essential oil detection function.
Under the normal working interface, press “ ” button to enter the working time and frequency
setting interface,the frequency (w) and the pause time (P) are adjustable, the adjustable value
range are 5~300 seconds (S).
Under the normal working interface, press “ ” button to enter start and end working time of
the day and frequency setting interface., press “ ” button to select the day of the week to be
set and press the “ ” button to confirm the start and end working time and working frequency
setting ,the working time period. 01 indicates the first working time setting, and there are three
working time and frequency settings.
Under the normal working interface, press “ ” and “ ” buttons at the same time to enter
local time setting interface.
Enter
Back
Add
Shift
ENT
ENT
ENT
1.There are two indicators :
On the left is a monochrome indicator. When it detects theit
there is No essertial Oil it lights up in yellow and blinks
continuously; on the right is a two-color indicator (blue,
green). During the working period, the green light is on and
the blue light is on for long time when machine is beyond
working time.

This manual suits for next models

2

Popular Accessories manuals by other brands

Quincy lab 140AE-1 operating manual

Quincy lab

Quincy lab 140AE-1 operating manual

HomePro ZIR000 user manual

HomePro

HomePro ZIR000 user manual

DOL 20SCR Technical user guide

DOL

DOL 20SCR Technical user guide

RAB Smart Task installation manual

RAB

RAB Smart Task installation manual

Kemppi KMS 300 quick guide

Kemppi

Kemppi KMS 300 quick guide

Stearns 57,500 Series Installation and service instructions

Stearns

Stearns 57,500 Series Installation and service instructions

iGuzzini TWILIGHT COPENAGHEN manual

iGuzzini

iGuzzini TWILIGHT COPENAGHEN manual

Adelaide Annexe & Canvas Avan Deluxe installation guide

Adelaide Annexe & Canvas

Adelaide Annexe & Canvas Avan Deluxe installation guide

OHAUS 5000 instruction manual

OHAUS

OHAUS 5000 instruction manual

HOME8 WLS1300 quick start guide

HOME8

HOME8 WLS1300 quick start guide

MAXBOTIX MaxSonar quick start guide

MAXBOTIX

MAXBOTIX MaxSonar quick start guide

ioSmart iSmart56 Installation and user guide

ioSmart

ioSmart iSmart56 Installation and user guide

Focusrite Scarlett 18i8 user guide

Focusrite

Focusrite Scarlett 18i8 user guide

Velleman ED38105 user manual

Velleman

Velleman ED38105 user manual

JumpSport SkyBounce user manual

JumpSport

JumpSport SkyBounce user manual

Prima-Temp PRIYA Instructions for use

Prima-Temp

Prima-Temp PRIYA Instructions for use

Tefcold BC85I-BC85I W user manual

Tefcold

Tefcold BC85I-BC85I W user manual

Vaisala WMS302 user guide

Vaisala

Vaisala WMS302 user guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.