Creative Play T119 User manual

TENNIS TARGET PANEL
Installation Instructions
REF: T119 - TENNIS TARGET PANEL
pg 1 of 8

pg 2 of 8 REF: T119 - TENNIS TARGET PANEL
PARTS required
x1 (TENNIS TOP PANEL)
x8 (COLLAR CLAMP CLA007)
x2 (MEDIUM POST)
x1 (TENNIS BOTTOM PANEL)
x2 (STEEL FRAME )

pg 3 of 8 REF: T119 - TENNIS TARGET PANEL
PARTS required continued...
x54 (M10 ´NYLOC´)
x54 (COVERED ENDS)
x24 (GRUB SCREWS M10x8mm
to be used on COLLAR CLAMPS
x2 (M10 x 100 SOCKET BUTTON BOLTS)
x52 (M10 x 70 SOCKET BUTTON BOLTS)
TOOLS required

pg 4 of 8 REF: T119 - TENNIS TARGET PANEL
Foundation Details
MEDIUM POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450
675000
750
600

pg 5 of 8 REF: T119 - TENNIS TARGET PANEL
Installation Instructions
Attach the 2 x STEEL FRAMES (playtec frames) together
Using 2X M10x100mm SOCKET BUTTON BOLTS / 2 X M10 NYLOCS / COVERED ENDS
Attach the 2 x TENNIS PANELS to the FRAME
Using 44 X M10x70mm SOCKET BUTTON BOLTS / 44 X M10 NYLOCS / 44 X COVERED ENDS
Notes:
SEE next step to ensure the
correct holes are used
(some will be left ‘EMPTY’
to bolt to the COLLARS)
1
2
Installation Instructions

pg 6 of 8 REF: T119 - TENNIS TARGET PANEL
Installation Instructions
Ensure the panels are bolted as shown below
DO NOT BOLT THROUGH THE HOLES CIRCLED (these will be used to attach the COLLARS)
3
Installation Instructions
SOCKET BUTTON BOLT
NYLOC
COVERED END

pg 7 of 8 REF: T119 - TENNIS TARGET PANEL
Attach the ‘PANEL ASSEMBLY’ to the COLLAR CLAMPS
Using 8 X M10x70mm SOCKET BUTTON BOLTS / 8X M10 NYLOCS / 8 X COVERED ENDS
Tighten the GRUB screws on the COLLAR CLAMPS
There are 3 x GRUB screws per COLLAR CLAMP
4
5
Installation InstructionsInstallation Instructions
Notes:
Collar clamps are positioned as shown RIGHT
(the clamp sits ‘behind ‘ the frame)
REPEAT FOR
OPPOSITE SIDE

pg 8 of 8 REF: T119 - TENNIS TARGET PANEL
Additional Dimensions
2.6m 0.10m
2.41m