Creative Play TIMBER BRIDGE User manual

TIMBER BRIDGE
Installation Instructions
REF: SG007 - TIMBER BRIDGE
pg 1 of 6

REF: SG007 - TIMBER BRIDGE
pg 2 of 6
PARTS required
SIDE ASSEMBLY - QTY 2
BASE - QTY 1
x20 (120mm brass screws)
TOOLS required

Foundation Details
REF: SG007 - TIMBER BRIDGE
pg 3 of 6
SOIL
TIMBER SUPPORT POST
CONCRETE

REF: SG007 - TIMBER BRIDGE
pg 4 of 6
Foundation Details - additional
In addition to POST HOLES - 3 x trenches will be required
(as shown above) 77mm DEEP to accomodate the 3 x BASE
supports which need to be installed into the ground
*Use 120 brass screws to attach the sides to the base

Attach the 2 x sides to the BASE
Using 120mm brass screws to attach the sides to the base
REF: SG007 - TIMBER BRIDGE
pg 5 of 6
Assembly Instructions
1
POSITIONED IN THE CENTRE
= SCREW HOLE LOCATIONS

Screw the sides to the base from the INSIDE
As shown below
Concrete the ASSEMBLED BRIDGE into the ground
Following the foundation details
REF: SG007 - TIMBER BRIDGE
pg 6 of 6
Assembly Instructions
2
3