Creative Play DINO CF103 User manual

DINO CLIMBING FRAME
Installation Instructions
REF: CF103 - DINO CLIMBING FRAME
pg 1 of 12

REF: CF103 - DINO CLIMBING FRAMEpg 2 of 12
Parts required
DF1 QTY x 2
(120mm x 90mm) 3600mm
DF2 QTY x 1
(90mm x 90mm) 300mm
DF3 QTY x 1
(90mm x 90mm) 3000mm
QTY x 1
(90mm x 90mm) 3000mm
Including swing hanger
QTY x 1
(90mm x 90mm) 3000mm
Including 2 swing hangers
QTY x 4
(90mm x 90mm) 2400mm
DF4 QTY x 1
(90mm x 90mm) 3000mm
DF5 QTY x 1
(120mm x 90mm) 3000mm
QTY x 2
(90mm x 90mm) 2400mm
QTY x 2
(90mm x 90mm) 600mm
DF6
DF7
DF8
DF9
DF10

REF: CF103 - DINO CLIMBING FRAMEpg 3 of 12
Parts required
x3 (PRE-ASSEMBLED TYRE ROPE)
x1 ( NET )
x1 ( 1015 STANDARD BAR)
x1 (Chain x 1598mm)
x1 ( LEFT)
x1 ( RIGHT)
x1 ( 1685mm ROPE)
x1 ( LEFT)
x1 ( RIGHT)
x1 ( LEFT)
x1 ( RIGHT)
x1 ( LEFT)
x1 ( RIGHT)
x2 (Chain x 770mm
Inc. thread bar /nylocs)

REF: CF103 - DINO CLIMBING FRAMEpg 4 of 12
Parts required
32x (FM80 ‘BRASS SCREW’)
14x (M12 x 200 square hex bolt)
4x (M12 x 230 square hex bolt)
6x (M12 x 120 square hex bolt)
34x (end caps) 34x (M12 NYLOC)
2x (EYEBOLT x 130mm)
8x (QUICKLINK )
x4(BLUE end caps)
SMALLER CAPS

REF: CF103 - DINO CLIMBING FRAMEpg 5 of 12
Foundation details
= MINIMUM SPACE
= SURFACING AREA

REF: CF103 - DINO CLIMBING FRAMEpg 6 of 12
Surfacing details
TAIL
TAIL
NOTES:
SMALL CIRCLES SHOWN ABOVE
ARE FOR TYRE CHAIN
TAIL
600
150
250

REF: CF103 - DINO CLIMBING FRAMEpg 7 of 12
Assembly instructions
1
Install the timbers (DF1,DF2,DF3,DF4,DF5,DF10)
2Attach the Timber (DF6) and DINO HEAD to the Timbers
(DF1,DF3,DF5)
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS
DF10
DF5 DF1
DF1
DF3
DF2
DF4
DF10

REF: CF103 - DINO CLIMBING FRAMEpg 8 of 12
Assembly instructions
3Attach the Timber (DF7) and DINO HEAD to the Timbers
(DF1,DF2,DF4)
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS
4Attach the DINO BACK PART to the Timbers (DF6,DF7)
Using FM80 BRASS SCREWS

REF: CF103 - DINO CLIMBING FRAMEpg 9 of 12
Assembly instructions
5Attach the Timbers (DF9) to the Timbers (DF1)
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS
6Attach the NET to the Timbers (DF1,DF9)
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS

REF: CF103 - DINO CLIMBING FRAMEpg 10 of 12
Assembly instructions
7Attach the ROPE and CHAIN to the Timbers (DF3,DF5)
Using / NYLOCS / END CAPS
8Attach the TYRES to the Timbers (DF6,DF7)
Use LOCK TIGHT to ensure the quick link remains CLOSED

REF: CF103 - DINO CLIMBING FRAMEpg 11 of 12
Assembly instructions
9Attach the BARS to the Timbers (DEDF1,DF2)
Using BRASS ‘SCREWS’
10 Attach the rest of PLAYEC parts to the Timbers
(DF2,DF3,DF4,DF5,DF10)
Using BRASS ‘SCREWS’

REF: CF103 - DINO CLIMBING FRAMEpg 12 of 12
Additional dimensions