Creative Play CH119 User manual

ROPE WALK
Installation Instructions
REF: CH119 - ROPE WALK
pg 1 of 8

REF: CH119 - ROPE WALKpg 2 of 8
Parts required
x8 (M12 NYLOC)
X18 (FM80 ‘BRASS SCREW’)
X8 (end caps)
X2 (PRE-ASSEMBLED TOP SECTION)
X1 (PRE-ASSEMBLED CENTER SECTION)
X4 (EYEBOLT X 160)
x4 (QUICKLINK )
X4 (PRE-ASSEMBLED ROPE)
X2 (PRE-ASSEMBLED LEFT/RIGHT SECTION)
x2 (Chain x 2150mm)

REF: CH119 - ROPE WALKpg 3 of 8
Foundation details
TIMBER SUPPORT POST
CONCRETE
SOIL
TIMBER SUPPORT POST
CONCRETE
SOIL
GROUND LEVEL

REF: CH119 - ROPE WALKpg 4 of 8
Surfacing details
= MINIMUM SPACE
= SURFACING AREA

REF: CH119 - ROPE WALKpg 5 of 8
Assembly instructions
1Install PRE-ASSEMBLED LEFT/RIGHT/CENTER sections
2Attach the Eyebolt to the Timber (RW4)
Using NYLOCKS / END CAPS
ENSURE:
The holes are facing the correct direction
NOTES:
LEFT/RIGHT SIDES

REF: CH119 - ROPE WALKpg 6 of 8
Assembly instructions
3Attach the Eyebolt to the Timber (RW2)
Using NYLOCKS / END CAPS
4Attach the ROPES to the TOP SECTION
Using FM80 BRASS CREWS
NOTES:
CENTER SIDE
NOTES:
BOTH SIDES

REF: CH119 - ROPE WALKpg 7 of 8
Assembly instructions
6Attach the CHAINS to the EYEBOLTS using a QUICKLINK
Use LOCK TIGHT to ensure the quick link remains CLOSED
5Attach TOP SECTIONS
Using FM80 BRASS CREWS
NOTES:
BOTH SIDES

REF: CH119 - ROPE WALKpg 8 of 8
Additional dimensions