Creative Play SEESAW User manual

SEESAW
Installation Instructions
REF: SR109 - SEESAW
pg 1 of 10

pg 2 of 10 REF: SR109 - SEESAW
PARTS required
x1 (SR109-RT - TIMBER)
x1 (DW-A 50X200 ROSTA UNIT)
x2 (seesaw seat standard) x2 (seesaw handle standard -
for square wood)
x1 set (metal support set)
consists of...
1 x SR109-R-Ma
1 x SR109-R-Mb
1 x SR109-R-Mc
SR109-R-Ma
SR109-R-Mb
SR109-R-Mc

pg 3 of 10 REF: SR109 - SEESAW
PARTS required
TOOLS required
x11 (M12 NYLOCS)
x5 (M12 x 160* CUP SQUARE BOLTS)
x6 (M12 x 130* CUP SQUARE BOLTS)
x4 (M12 x 60 BOLT / SET)
x10 (FM80 WOOD SCREWS)
x15 (COVERED END)
x4 (COVERED END M8)

pg 4 of 10 REF: SR109 - SEESAW
Foundation Details
CONCRETE
POST / SUPPORT
SOIL (150mm)

pg 5 of 10 REF: SR109 - SEESAW
= MINIMUM SPACE
= SURFACE AREA
Surfacing Details

pg 6 of 10 REF: SR109 - SEESAW
Attach the ROSTA unit to SR109-R-Mc
Using 6 x M12x130 CUP SQUARE BOLTS / 6 x NYLOCS / 6 x COVERED ENDS
Attach the TIMBER to the SR109-R-Ma/b metal parts
Using 5 x M12x160 CUP SQUARE BOLTS / 5 x NYLOCS / 5 x COVERED ENDS
1
2
Installation Instructions

pg 7 of 10 REF: SR109 - SEESAW
Position & Attach the TIMBER ASSEMBLY to the SUPPORT
Using 4 x M12 x 60 BOLT / 4 x COVERED END
3
NOTES:
The ROSTA UNIT has its own thread -
(2x BOLTS either side)
Installation Instructions
ENSURE:
The seesaw is in a LEVEL POSITION before
bolting together

pg 8 of 10 REF: SR109 - SEESAW
Attach the HANDLE
Using 2 x FM80 WOOD SCREWS / 2 x M8 COVERED ENDS
Attach the SEAT
Using 3 x FM80 WOOD SCREWS
4
5
Installation Instructions
NOTES:
If the bolt does not fit as shown ABO-
VE attach as shown RIGHT

pg 9 of 10 REF: SR109 - SEESAW
Repeat STEPS 4 - 5 for the OPPOSITE END
Using 5 x FM80 WOOD SCREWS / 2 x M8 COVERED ENDS
6
Installation Instructions

pg 10 of 10 REF: SR109 - SEESAW
Addition Drawings
‘IN USE’AT REST
Rotation of 30 degress shown red above (SR109-R - SEESAW ROUND SHOWN ABOVE)