Creative Play PICNIC BENCH User manual

PICNIC BENCH
Installation Instructions
REF: PT101 - PICNIC BENCH
pg 1 of 11

REF: PT101 - PICNIC BENCHpg 2 of 11
Parts required
TIMBERS
PICNIC 1 QTY x 4
(90mm x 90mm) 525mm
PICNIC 2 QTY x 2
(90mm x 90mm) 972mm
PICNIC 3 QTY x 2
(90mm x 90mm) 880mm
PICNIC 4 QTY x 2
(120mm x 90mm) 972mm
PICNIC 5 QTY x 2
(120mm x 90mm) 275mm

REF: PT101 - PICNIC BENCHpg 3 of 11
Parts required
x2 (PLAYTEC PICNIC SIDES)
x2 (PLAYTEC ‘L’ LEFT ) x2 (PLAYTEC ‘L’ RIGHT )
x2 (HEXBOARD SIT ‘A’) x2 (HEXBOARD SIT ‘B’)
x2 (PLAYTEC ‘U’ LEFT)
x2 (PLAYTEC ‘U’ RIGHT)
x1 (PLAYTEC TOP ‘B’ )
x1 (PLAYTEC TOP ‘A’ )
x1 (PLAYTEC MIDDLE PART) x4 (PLAYTEC ‘T’ PART)

REF: PT101 - PICNIC BENCHpg 4 of 11
x6 (M12 NYLOC)
Parts required
x60 (FM80 ‘BRASS SCREW’) x2 (M12 x 200 square cup hex bolt)
x6 (end caps)
x2 (400 THREAD BAR)
x8 (TORK TAINERS)
4 x 12/12/12
4 x 18/18

REF: PT101 - PICNIC BENCHpg 5 of 11
Foundation details

REF: PT101 - PICNIC BENCHpg 6 of 11
Assembly instructions
1Attach Playtec MIDDLE piece to the TIMBERS
(PICNIC1,PICNIC2)
Using M12 CUP SQUARE BOLTS/THREAD BAR / NYLOCS / END CAPS
2Attach Playtec ’U’ left/right both sides to the TIMBERS
(PICNIC1,PICNIC3,PICNIC5)
Using FM80 BRASS SCREWS

REF: PT101 - PICNIC BENCHpg 7 of 11
Assembly instructions
3Attach Playtec ’L’ left/right both sides to the TIMBERS
(PICNIC4,PICNIC5)
Using FM80 BRASS SCREWS
4Attach Playtec Picnic SIDES to the TIMBERS
(PICNIC1,PICNIC3,PICNIC4,PICNIC5)
Using FM80 BRASS SCREWS

REF: PT101 - PICNIC BENCHpg 8 of 11
Assembly instructions
5Attach Playtec TOP ‘A’ and ’B’ to the TIMBER (PICNIC2)
Using FM80 BRASS SCREWS
6Attach Playtecs TOP ‘A’ , ‘B’ and ‘T’ piece
Using TORKTAINERS

REF: PT101 - PICNIC BENCHpg 9 of 11
Assembly instructions
7Attach Hexboard SIT ‘A’ and ’B’ to the TIMBER (PICNIC4)
Using FM80 BRASS SCREWS
8Attach Attach Hexboard SIT ‘A’ to SIT’B’
Using TORKTAINERS and BRASS SCREW

REF: PT101 - PICNIC BENCHpg 10 of 11
x12
(M8 x 30 socket button bolt)
PARTS REQUIERED (GAMES TOP)
1Attach Playtec top SIDES and Perspex to the PLAYTEC
TOP ’C’
Using M8 SOCKET BUTTON BOLT AND NUT
Assembly instructions (GAMES TOP)
x1 (PLAYTEC TOP ‘C’ ) x1 (PERSPEX )
x12
(M8 ACORN NUT)

REF: PT101 - PICNIC BENCHpg 11 of 11
Additional dimensions