Creative Play CH127 User manual

CLIMBING WALL
Installation Instructions
REF: CH127 - CLIMBING WALL
pg 1 of 7

PARTS required
TOOLS required
REF: CH127 - CLIMBING WALL
x4 (90x90 timber inc END CAP)
pg 2 of 7
x36 (FM80 ‘Brass screws’)
LEFT
LEFT
MIDDLE
MIDDLE
RIGHT
RIGHT
RT1
TOP PANELS
BOTTOM PANELS

Foundation Details
REF: CH127 - CLIMBING WALL
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
pg 3 of 7

Surfacing Details
REF: CH127 - CLIMBING WALL
pg 4 of 7
= MINIMUM SPACE
= SURFACE AREA

1
2
Assembly Instructions
REF: CH127 - CLIMBING WALL
Install the 4 x RT1 timbers
As per the foundation details
Attach the PLAYTEC PANELS
Using FM80 BRASS SCREWS
FLAT FACE FRONT
FLAT FACE BACK
pg 5 of 7

Assembly Instructions
REF: CH127 - CLIMBING WALL
pg 6 of 7
3
4
ENSURE countersunk pieces are positioned correctly
The ‘FLAT SIDE’ of the PLAYTEC is to go against the flat side of the POST
ENSURE the PLAYTEC is attached as shown
The MIDDLE PIECES sit on the opposite side of the TIMBER
GL
Ground Level

Additional Drawings
REF: CH127 - CLIMBING WALL
pg 7 of 7
VIEW FROM BACK
VIEW FROM FRONT