Crestron CRESTRON-APP-SSTV How to use

CRESTRON-APP-SSTV
Control App for Samsung SMART TV®
Operations & Installation Guide

The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, Crestron Studio, and Crestron Toolbox are either trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. Samsung, Samsung Apps, Samsung SMART TV, and SMART Hub are either trademarks or registered
trademarks of Samsung Electronics Co., Ltd in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the
marks and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Contents •i
Contents
Control App for Samsung Smart TV: CRESTRON-APP-SSTV 1
Introduction ............................................................................................................................... 1
Setup .......................................................................................................................................... 2
Requirements...............................................................................................................2
Download the App....................................................................................................... 2
Configure the App’s Menu..........................................................................................3
Configure the App on the TV ......................................................................................3
Auto-Start on Power Up ..............................................................................................9
Start the App................................................................................................................9
Operation ................................................................................................................................. 10
Problem Solving ...................................................................................................................... 11
Troubleshooting......................................................................................................... 11
Further Inquiries ........................................................................................................ 12
Future Updates .......................................................................................................... 12
Appendix A:Configuration .................................................................................................... 13
Menu Structure .......................................................................................................... 13
Settings ...................................................................................................................... 15
Appendix B:XML Text and Supported Commands............................................................... 17
Appendix C:Sample XML File.............................................................................................. 18
Return and Warranty Policies .................................................................................................. 21
Merchandise Returns / Repair Service ...................................................................... 21
Crestron Limited Warranty........................................................................................ 21

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •1
•Compatible with 2012 or later Samsung SMART TV models
•Provides custom configurable control menus for AV, HVAC, lights,
and shades
•Allows programmatic control of AV source selection, volume, and
mute functionality via a Crestron control system
•Enables setting temperature, controlling lights and shades for multiple
rooms
•Provides dynamic text alerts for all types of functions
•Works with any remote including Samsung®, Crestron, or universal
•Can be set to launch automatically when TV is turned on
•Runs in background as a ticker app
•Supports multiple TVs running individually tailored apps
•Download and purchase through SMART Hub multipurpose
entertainment and family center1, 2
•Free demo available
•Requires Crestron control system with custom programming
•Available in the United States only
Control App for Samsung SMART
TV: CRESTRON-APP-SSTV
Introduction
The Control App for Samsung SMART TV®brings Crestron®control and
monitoring directly to a user interface on a Samsung SMART TV as a downloadable
app. Fully integrated with Crestron programming software, including Crestron
Studio™ and SIMPL Windows, the app is available for download from the TV’s
built-in SMART Hub®multipurpose entertainment and family center.
1. The TV must be connected to the Internet. Refer to “Requirements” on page 2 for compatible models.
For details on connecting the TV to the Internet, refer to the manual that comes with the TV.
2. To purchase and download the app, the end user must have a valid Samsung account with sufficient
funds. For details on obtaining a Samsung account, refer to the manual that comes with the TV.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
2•Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
Setup
Requirements
The following is required to install and use the Crestron app:
•An Internet-connected Samsung SMART TV and included remote–The app
is compatible with all Samsung 2012 and later Smart TVs. Prior Smart TV
models (2010 and 2011 series) are not supported. 2010 models contain a
“C” in their model number (i.e., UN46C9000) while 2011 models contain a
“D” in their model number (i.e., PN46D8000).
•A Samsung account with available funds–Required to purchase the app
from the Samsung SMART Hub. For details on obtaining and funding a
Samsung account, refer to the manual that comes with the TV.
•A control system running a program that uses the Samsung SMART TV
symbol.
•A network connection to the control system.
Download the App
NOTE: This section provides instructions to download the app from Samsung’s
built-in SMART Hub multipurpose entertainment and family center. For details on
using SMART Hub, refer to the manual that comes with the TV.
1. Turn on the TV and press on the TV remote to open the SMART Hub.
2. Use the TV remote to select Samsung Apps®.
3. Search for the app:
a. Use the TV remote to select Search Samsung Apps. An on-screen
keyboard is displayed.
b. Use the TV remote and the on-screen keyboard to enter “Crestron” and
select Done.
4. Use the TV remote to highlight and select the app.
5. Use the TV remote to highlight Download and select it to begin the
download process.
6. Follow the on-screen instructions to complete the purchase. When
complete, the icon for the app () is displayed in the list of Samsung
Apps.
NOTE: The app includes a built-in Demo mode. A user program is not
required for Demo mode to operate.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •3
Configure the App’s Menu
The app uses an XML file that is stored on the control system to configure the app’s
menu. The XML file can be edited to customize the appearance and order of the
app’s menus. To edit the XML file, perform the following procedure:
1. Download the CRESTRON-APP-SSTV example program from
www.crestron.com/exampleprograms.
The example program’s .zip file contains the XML file MyProject.xml.
NOTE: Crestron software and any files on the website are for authorized
Crestron dealers and Crestron Service Providers (CSPs) only. New users
must register to obtain access to certain areas of the site (including the FTP
site).
2. Extract the MyProject.xml file and open it for editing in an XML editor
such as Notepad, Wordpad, or other text editor.
3. Edit as necessary to present the menu options as desired and save the file
locally.
NOTE: For details on menu configuration and using the XML file, refer to
“Appendix A: Configuration” on page 13, and “Appendix B: XML Text
and Supported Commands” on page 17.
4. Use Crestron Toolbox™ to upload the XML file to the control system.
a. Establish communications with the control system as described in the
control system’s operations guide.
b. From the Tools menu, select File Manager.
c. Place the XML file in the control system’s “HTML” folder. For details,
refer to the Crestron Toolbox help file.
5. Reboot the control system.
Configure the App on the TV
The app must be configured for use with the control system.
NOTE: Additional settings can be specified in the XML file. Refer to “Settings” on
page 15.
1. Start the app from the SMART Hub by selecting the icon. The app
starts in Demo mode and is displayed on the TV.
Demo mode is used to demonstrate the capabilities of the application. While
operating in Demo mode, there is no IP communication between the app
and the control system.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
4•Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
While operating in Demo mode, only infrared commands from the TV
remote are recognized. The following commands are supported by the app:
Button Functions
BUTTON DESCRIPTION
▲/▼/◄/► Navigate through the menus
Enter Select the highlighted item
RETURN Return to the previous view
EXIT Close the app
D/Blue Show/hide the Main Menu
CRESTRON-APP-SSTV Displayed on Startup
2. Use the TV remote to highlight Settings and select it to display the
“Configuration Menu”.
NOTE: Upon initial startup, the app runs in Demo mode and an
abbreviated “Configuration Menu” is displayed. To turn off Demo mode
and view the entire “Configuration Menu”, refer to step 3.
Configuration Menu (Demo Mode Enabled)

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •5
3. Prior to configuration, when the app is started, it operates in Demo mode
that shows a demonstration of available functions. Demo mode can be used
without a connection to a control system or the XML file that is placed in
the control system’s HTML directory. Demo mode must be disabled when
used with a control system.
Use the TV remote to highlight and select Demo Mode. The “Enable Demo
Mode” screen is displayed.
“Enable Demo Mode” Screen
Use the TV remote to enable or disable Demo mode and select Return.
When Demo mode is disabled, the entire “Configuration Menu” is
displayed.
Configuration Menu (Demo Mode Disabled)
4. Once the app is started, it can be locked so the user cannot exit the app. Use
the TV remote to highlight and select Allow User Exit. The “Allow User
Exit” screen is displayed.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
6•Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
“Allow User Exit” Screen
Use the TV remote to allow or deny the user the ability to exit the app and
select Return. The “Configuration Menu” is displayed.
5. Use the TV remote to highlight and select IP Address or Host Name. The
“Enter IP Address or Host Name” screen and on-screen keyboard are
displayed.
“Enter IP Address or Host Name” Screen
Use the TV remote and on-screen keyboard to enter the control system’s IP
address or host name and select OK. The “Configuration Menu” is
displayed.
NOTE: Use a host name rather than an IP address as the DHCP server may
change the IP address periodically.
6. If necessary, use the TV remote to highlight and select HTTP Port. The
“Enter Control System HTTP Port” screen and on-screen keypad are
displayed.
NOTE: The default port is 80.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •7
“Enter Control System HTTP Port” Screen
Use the TV remote and on-screen keypad to enter the control system’s
HTTP port and select OK. The “Configuration Menu” is displayed.
7. Use the TV remote to highlight and select IP ID. The “Enter IP ID” screen
and on-screen keyboard are displayed.
“Enter IP ID” Screen
Use the TV remote and on-screen keyboard to enter the control system’s IP
ID and select OK. The IP ID must match the IP ID specified in the control
system program. Upon entering the IP ID, the “Configuration Menu” is
displayed.
8. Use the TV remote to highlight and select CIP Port. The “Enter CIP Port
Number” screen and on-screen keypad are displayed.
NOTE: The default port is 41794.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
8•Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
“Enter CIP Port Number” Screen
Use the TV remote and on-screen keypad to enter the CIP port number used
by the control system and select OK. The “Configuration Menu” is
displayed.
9. Use the TV remote to highlight and select Filename. The “Enter Filename”
screen and on-screen keyboard are displayed.
“Enter Filename” Screen
Use the TV remote and on-screen keyboard to enter the name of the XML
file created in “Configure the App’s Menu” on page 3 and select OK. The
“Configuration Menu” is displayed.
10. Use the TV remote to highlight and select Apply. The “Configuration
Menu” disappears.
NOTE: If a successful connection is made with the control system, the app
automatically uses these settings the next time it launches. If the app is not
able to connect to the control system after a timeout of approximately 20
seconds, the app issues the notification “Control System Connection Failed.
Check Settings.” For a detailed list of error messages and probable causes,
refer to “Troubleshooting” on page 11.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •9
Auto-Start on Power Up
The app can be set to automatically start when the TV is powered. When configured,
the app automatically launches in the background after the TV initializes
(approximately 20 seconds). To configure the TV to automatically start the app,
perform the following procedure:
1. On the TV remote, press to open the SMART Hub.
2. On the TV remote, press TOOLS.
3. Use the TV remote to highlight and select Settings.
4. Use the TV remote to highlight and select Service Manager.
5. Use the TV remote to highlight and select Auto Ticker. A list of apps that
can automatically start (also known as ticker apps) is displayed.
6. Use the TV remote to highlight the Crestron App and select it. The selected
app is indicated with a checkmark.
NOTE: When configured to automatically start, the television must be connected to
an active video signal for the Auto Ticker feature to function.
Start the App
1. On the TV remote, press to open the SMART Hub.
2. Use the TV remote to highlight the app and select it. If the app is running in
Demo mode, the app is displayed. Otherwise, the app starts in the
background.
NOTE: If a non-ticker app is started while the Crestron app is running, the
Crestron app is disabled and automatically restarts when the non-ticker app
is closed.
NOTE: If a ticker app is started while the Crestron app is loaded, the
Crestron app is disabled and must be manually restarted after the ticker app
is closed.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
10 •Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
Operation
1. On the TV remote, press the right navigation button to display the app menu.
The content is resized to prevent interruption of the viewing experience.
2. Use the TV remote to control the system functions.
Button Functions
BUTTON DESCRIPTION
▲/▼/◄/► Navigate through the menus
Enter Select the highlighted item
RETURN Return to the previous view
EXIT Close the app
D/Blue Show/hide the main menu
3. To hide the app and restore full-screen video, press the left navigation button
when the main menu is displayed. The app disappears.
NOTE: If a non-ticker app is started while the Crestron app is running, the
Crestron app is disabled and automatically restarts when the non-ticker app is
closed.
NOTE: If a ticker app is started while the Crestron app is loaded, the Crestron
app is disabled and must be manually restarted after the ticker app is closed.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •11
Problem Solving
Troubleshooting
If an error occurs, the app displays a message. The following table provides
corrective action for possible trouble situations. If further assistance is required,
please contact a Crestron customer service representative.
CRESTRON-APP-SSTV Troubleshooting
MESSAGE CAUSE(S) CORRECTIVE ACTION
Device Offline. The app attempted to
send a signal to the
control system, but the
app is not online with
the control system.
Verify that the control
system’s IP table is set up
correctly and that the correct
IP address/hostname and
CIP Port are set in the app.
Control System
Connection
Failed. Check
Settings.
The app attempted to
connect to the control
system but timed out.
Verify that the control
system’s IP table is set up
correctly and that the correct
IP address/hostname and
CIP port are set in the app.
[0] Load Project
Failed
Unable to
communicate with
server at: {Web
server ip address}
The app was unable to
connect to a server at
the specified IP address.
Verify that the Web server's
address is set correctly in the
app and that the server is
accessible.
[404] XML File not
found on control
system.
The app was able to
connect to the server,
but the project XML file
was not located on the
server.
Verify that the project XML
file is copied to the Web
server's root directory and
that the filename is spelled
correctly in the app's settings.
Be sure to include the file
extension in the filename, i.e.:
MyProject.xml.63
[500] Internal
Server Error.
The server reported an
internal server error to
the app.
Verify that the Web server is
operating properly and is
accessible via a browser.
Error parsing xml
file
{filename}
contains incorrect
XML
The app was able to
download the project
XML file from the server
but was unable to parse
the XML file.
Verify that the XML contained
in the project xml file is valid.
Use an online XML validator if
unsure.
Time out error.
Check network
connection on TV
and Control
System.
A timeout occurred while
trying to connect to the
Web server.
Verify all network settings and
physical connections.
XML file request
was aborted.
An operation aborted
the XML file request.
Verify all network settings and
physical connections.
Load Project
Failed:
Status:
[StatusCode}
ResponseText
An error occurred while
requesting the project
XML which was not one
of the above categories.
Look at the StatusCode and
ResponseText for an
indication of what the issue is.
The StatusCode is a standard
HTTP status code.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
12 •Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
Further Inquiries
To locate specific information or resolve questions after reviewing this guide,
contact Crestron's True Blue Support at 1-888-CRESTRON [1-888-273-7876] or, for
assistance within a particular geographic region, refer to the listing of Crestron
worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron’s Online Help at
www.crestron.com/onlinehelp. First-time users must establish a user account to fully
benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of
the CRESTRON-APP-SSTV, additional information may be made available as
manual updates. These updates are solely electronic and serve as intermediary
supplements prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its
relevance. Updates are identified as an “Addendum” in the Download column.

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •13
Appendix A: Configuration
NOTE: This section contains instructions that require familiarity with the XML
programming language and structure. Only experienced programmers should make
changes to the XML file.
NOTE: For a list of supported XML commands, refer to “Appendix B: XML Text
and Supported Commands” on page 17.
NOTE: XML text that can be modified and saved as an XML file can be found in
“Appendix C: Sample XML File” on page 18.
Menu Structure
When the app is started, the main menu is displayed. The structure and functions of
the main menu are defined in an XML file that is stored in the control system’s
“HTML” folder.
The structure and functions of the main menu are configured within the “menu” tags
of the XML file.
The main menu is comprised of main menu items. The main menu can hold a
maximum of six main menu items. Each main menu item can be a function (i.e.
“Lights On”) or can contain an unlimited amount of subitems which can be set to
function as buttons or HVAC controls.
Create Main Menu Items
“Main Menu” Screen
To create and configure an item in the main menu, add the following syntax within
the “menu” tags of the XML file where XXXX is a text label that is displayed on the
button and YY is the digital join assigned in the control system program.

Control App for Samsung SMART TV CRESTRON-APP-SSTV
14 •Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
<item type="button">
<label>XXXX</label>
<djoin>YY</djoin>
</item>
NOTE: Unless an actual control system function (aside from menu navigation) is
assigned to a main menu item, the digital join should not be specified.
Create Subitems
There are two types of subitems that can be displayed: button items and HVAC
items.
•Button Item
“Main Menu” Screen with Submenu Shown
A button is a subitem which uses the standard tags <label> (for the button’s
label), <djoin> (digital join), and <sjoin> (serial join). If a user selects a
button subitem, the digital <djoin> is triggered and the submenu is
displayed (if one exists).
An indirect text join can be specified for the menu item by adding the
<sjoin> tag to the menu item.
To create and configure a button subitem in a main menu item, add the
following syntax within a main menu item’s “item” tags where XXXX is a
text label that is displayed on the button and YY is the digital join assigned
in the control system program
<subitem type="button">
<label>XXXX</label>
<djoin>YY</djoin>
</subitem>

CRESTRON-APP-SSTV Control App for Samsung SMART TV
Operations & Installation Guide – DOC. 7594A Control App for Samsung SMART TV: CRESTRON-APP-SSTV •15
•HVAC Item
“Main Menu” Screen with Submenu Showing HVAC Control
An HVAC item looks like a standard button but displays an HVAC control
object when selected. If the user has selected an HVAC item, pressing “up”
on the TV remote’s navigation pad triggers the <temp_up_djoin> for as
long as the button is pressed. Likewise, pressing “down” triggers the
<temp_down_djoin> for as long as the button is pressed.
To create and configure an HVAC item in a main menu item, add the
following syntax within a main menu item’s “item” tags where XXXX is a
text label that is displayed on the button, YY is a digital join assigned in the
control system program, and ZZ is an analog join assigned in the control
system program
<item type="hvac">
<label>XXXX</label>
<current_temp_ajoin>ZZ</current_temp_ajoin>
<setpoint_ajoin>ZZ</setpoint_ajoin>
<temp_up_djoin>YY</temp_up_djoin>
<temp_down_djoin>YY</temp_down_djoin>
</item>
Settings
In addition to the in-app settings described in “Configure the App on the TV” on
page 3, additional settings can be configured in the “settings” tags of the XML file
for further customization.
PIN Number
A Personal Identification Number (PIN) can be assigned in the XML file to prevent
accidental changes to the in-app settings. To use a PIN to protect the in-app settings,
add the following syntax within the “settings” tags where YYYY is a 4-digit number.
<pin>YYYY</pin>

Control App for Samsung SMART TV CRESTRON-APP-SSTV
16 •Control App for Samsung SMART TV: CRESTRON-APP-SSTV Operations & Installation Guide – DOC. 7594A
The PIN number to be used should be placed between the “pin” tags. If a PIN is not
listed, the in-app settings can be changed as described in “Configure the App on the
TV” on page 3.
Timeout Setting
An automatic timeout can be set to hide the app’s menu after a period of inactivity
(specified in seconds). To enable an automatic timeout, add the following syntax
within the “settings” tags where YY is a timeout length specified in seconds.
<menutimeout>YY</menutimeout>
The timeout length to be used should be placed between the “menutimeout” tags. If
left unchanged, the default timeout is 10 seconds.