CROC Crystalline RCL-IF15 User manual
CRYSTALLINE
FLAT IRON
PRODUCT MANUAL
NAME OF PARTS
TEMPERATURE
CONTROL BUTTON
COOL TIP HEAT CHANGE INDICATOR
HEAT VENT SYSTEM
INFRARED STRIP
TANGLE-FREE SWIVEL CORD
CERAMIC PLATES
ILLUMINATED LED HANDLE
TEMPERATURE GAUGE
This appliance is for household use and can be plugged into any 110-240 volt AC electrical outlet. For connection to a 240V
supply, use an attachment plug adapter of the proper conguration for the power supply receptacle.
Your iron is capable of reaching maximum temperature and can be ready to use within minutes. Thermal protectants are
recommended before applying heat to your hair, but avoid heavy use of product as it can build up and damage your iron.
Perform a strand test prior to using your iron, to ensure proper heat usage. (See Temperature Guide.)
Divide your hair into manageable sections. Begin working with the iron about an inch away from your scalp. Always use the
recommended temperature settings for your hair type. If you experience some steam during styling, it may be excess moisture
in your hair evaporating, and is not an indication of heat damage. However, if you begin to smell burning hair, turn the heat
setting down. * Use a comb to separate and section hair while using at iron is recommended.
POWER ON/ OFF
Press the Power [ ] button for a few seconds to turn the iron on.
TEMPERATURE CONTROL
Your iron will automatically heat to 410 degrees Fahrenheit when plugged in and turned
on. To adjust your iron’s temperature, click the HIGH [ ] or LOW [ ] buttons until you reach
your desired setting. The temperature will uctuate as it gets adjusted. Once the set
temperature is reached, the temperature indicated in the display will stop blinking and will
remain stable. NOTE: The level of the LED light increases or decreases as the temperature
uctuates. When the iron is turned o, one level of the LED light will blink until the plates
cool down completely.
CELSIUS TO FAHRENHEIT
Automatic change of Celsius to Fahrenheit by voltage
AUTO SHUT OFF
For safety purposes, your iron will automatically shut o after 30 minutes of non-use. If the auto shut o occurs, your iron
can be reheated to the previously set temperature if you click the Power button. The auto shut o is a safety feature only,
and you should unplug your iron after each use.
IMPORTANT: During the rst few minutes of initial use, you may notice smoke and a slight odor, as well as a humming noise.
This is normal and is not cause for concern.
CAUTION: THIS IRON REACHES A VERY HOT TEMPERATURE OF 450°F(230°F). ALWAYS BEGIN AT THE LOWEST SETTING AND
INCREASE LOWEST SETTING ONLY AS NEEDED FOR YOUR HAIR TYPE AND STYLE. IF EVER USING HIGHER TEMPERATURE,
USE SPARINGLY AND NEVER LET THE IRON REST IN ONE POSITION. ALWAYS KEEP THE IRON MOVING THROUGH THE HAIR.
ALWAYS TURN OFF THE APPLIANCE USING THE ON/OFF SWITCH AND UNPLUG IT FROM THE ELECTRICAL SOCKET.
ON/OFF TEMP
CONTROL
STRAIGHTEN: Place a section of hair between the plates, starting about an inch from your scalp.
Grip the handle lightly to close the plates, glide the iron down to the ends of your hair and release.
Always start with sectioned hair, and use a light thermal protectant to avoid heat
damage.
CURLING: Place a section of hair between the plates, starting about 3-5 inches from the scalp. Wrap
hair around the iron once, grip the handle lightly to close the plates and then pull rmly down
towards the end of your hair and release.
FLIPPING ENDS OUT: Place a section of hair between the plates, starting about an inch from your
scalp. Grip the handle lightly to close the plates, glide the iron down your hair curving outward to
ip up the ends and release.
FLIPPING ENDS UNDER: Place a section of hair between the plates, starting about an inch from your
scalp. Grip the handle lightly to close the plates, glide the iron down your hair curving inward to ip
the ends under and release.
STYLING TIPS
For ne or chemically treated hair
For wavy to medium textured hair
For thick, coarse hair
IRON TEMPERATURE
HAIR TYPE
TEMPERATURE GUIDE
280°F ~ 330°F(135°C ~ 165°C)
310°F ~ 390°F(155°C ~ 200°C)
390°F ~ 450°F(200°C ~ 230°C)
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present,
basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.
DANGER:
ANY APPLIANCE IS ELECTRICALLY LIVE EVEN WHEN THE SWITCH IS OFF. TO REDUCE
THE RISK OF DEATH OR INJURY BY ELECTRIC SHOCK:
- ALWAYS UNPLUG APPLIANCE IMMEDIATELY AFTER USING.
- DO NOT USE WHILE BATHING OR IN THE SHOWER.
- DO NOT PLACE OR STORE APPLIANCE WHERE IT CAN FALL OR
BE PULLED INTO A TUB OR SINK.
- DO NOT USE NEAR, PLACE IN OR DROP INTO WATER OR OTHER
LIQUID.
- IF AN APPLIANCE FALLS INTO WATER, UNPLUG IT IMMEDIATELY.
DO NOT REACH INTO THE WATER.
Table of contents
