Crosley Furniture CO7242 User manual

Outdoor Wicker Dining Chair
CO7242

#1 #2 #3 #4
*Please note cushion
covers will ship separately.
Core of Seat
Cushion
2 PCS
PART LIST
ABC
HARDWARE LIST
2
D E
Bolt
24 PCS (Extra 1)
M6*20mm
Long Bolt
8 PCS (Extra 1)
M6*35mm
Allen Wrench
1 PC
Flat Washer
32 PCS (Extra 1)
M6mmM6mm
Back Panel Seat Panel Stretcher
2 PCS
Left Front Leg
F
2 PCS 2 PCS 2 PCS 2 PCS
Right Front Leg
G
Cover of Seat
Cushion *
2 PCS

Step 1. Lay back panel (part A) down on a soft flat surface, such as carpet, as shown below.
Attach seat panel (part B) to back panel (part A) using long bolts (part #2), flat washers
(part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#4
#2
#3
B
A
A
C
B
#4
#1
#3
Step 2. Attach stretcher (part C) to back panel (part A) using bolts (part #1), flat washers (part #3)
and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#3 x4
#4 x1
#2 x4
#1 x4
#3 x4
#4 x1
3

4
GF
Step 4. Insert core of seat cushion (part G) into cover of seat cushion (part F).
Step 3. Attach left front leg (part D) and right front leg (part E) to assembled unit (parts A, B & C) using
bolts (part #1), flat washers (part #3) and allen wrench (part #4).
NOTE: Please fully tighten all bolts at this time.
#1 x8
#3 x8
#4 x1
#4
#1
#3
#4
#1
#3
D
B
C
E
A

5
Step 5. Carefully turn unit upright. Add seat cushion and tie strap to chair as shown below.
Repeat steps 1-5 to assemble remaining chair.