Crosley Furniture CF6123 User manual

Entryway Bench
CF6123

PART LIST
A
Top Panel
1 PC
B
Bottom Panel
1 PC
C D
Side Frame
2 PCS
Bottom Rail
2 PCS
HARDWARE LIST
#1 #2
Bolt
22 PCS (Extra 2)
2
Allen Wrench
1 PC
1/4' x 3/8"L

Step 1. Attach bottom rails (part D) by inserting into the ends of side frames (part C) using bolts (part #1)
and allen wrench (part #2).
NOTE: Please do not fully tighten bolts until unit is fully assembled.

3
Step 2. Carefully lay top panel (part A) upside down on a soft flat surface, such as carpet, as shown below.
Attach assembled unit (parts C & D) to top panel (part A) using bolts (part #1) and allen wrench
(part #2).
NOTE: Please do not fully tighten bolts until unit is fully assembled.

#1 x 8
#2 x 1
#1 x 8
#2 x 1
C
C
C
D
D
#1
#1
#2
#1 #1
C
D
C
A
#1
#1
#1
#1
#1
#1
#1
#1
#2

Step 3. Attach bottom panel (part B) to bottom rails (part D) using bolts (part #1) and allen wrench
(part #2).
NOTE: Please fully tighten all bolts at this time.

4
Step 4. Carefully turn unit upright.

#1 x 6
#2 x 1
D
B
#1
#1
#1
#1
#1
#1
#2
#1
#2
BC