Crosley Furniture CO7166 User manual

Outdoor Wicker Rocking Chair
CO7166

PART LIST
A B C
Right Arm Panel
1 PC
Left Arm Panel
1 PC
HARDWARE LIST
#1 #2 #3
Short Bolt
6 PCS (Extra 1) 2 PCS (Extra 1)
Flat Washer
8 PCS (Extra 1)
M6*15mm M6mm
1 PC
M6mm
M6*40mm
Long Bolt Allen Wrench
#4
M6mm
Back Panel
1 PC
2
D E
Seat Panel
1 PC
Stretcher
1 PC

Step 1. Lay right arm panel (part A) upside down on a soft flat surface, such as carpet, as shown below.
Attach back panel (part C) to right arm panel (part A) using short bolts (part #1), flat washers
Step 2. Attach seat panel (part D) and stretcher (part E) to right arm panel (part A) using short
bolt (part #1), long bolt (part #2), flat washers (part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
3
#1 x2
#3 x2
#4 x1
#4
#1
#3
C
A
NOTE: Please do not fully tighten bolts until unit is fully assembled.
(part #3) and allen wrench (part #4).
x1
#2
x2#3
x1
#4
#1
#3
#4
x1
ED
C
A
#1
#3
#2
#4

Step 3. Attach left arm panel (part B) to assembled unit (parts A, C, D, & E) using short bolts (part #1),
4
#1 x3
#2
x4#3
x1
#4
x1
#4
#4
#3
#2
#3
#1
#3
#1
C
A
B
D
E
long bolt (part #2), flat washers (part #3) and allen wrench (part #4).
NOTE: Please fully tighten all bolts at this time.
Step 4. Carefully turn unit upright on a flat surface.