Crossbeats ATOM User manual

USER MANUAL
A TOM

2.
3.
1. Touch control
Charging case LED
Microphone
6.
5.
4. Pressure relief hole
Rechargeable touch pad
Indicator light

4- FIRST TIME PAIRING
1 2
Take out the
earbuds
from the
charging case
The earbuds
will auto
power ON
3 4
Search for
‘CB-ATOM’ in
your phone’s
BT list
Click to
connect
CB-ATOM CB-ATOM

6- LED INDICATOR ON CASE
While charging – White light keep blinkingbased on the charge level
Low Battery (less than 10%) – The first light will be on for 3 secs
Battery full – All 4 lights will be on
Current charge level – Press on the button present at the bottom of the
case, to check the battery level of the case.

8- RESET
1. Ensure L&R earbuds are
disconnected from all the
devices, (turn off the Bluetooth
option on the device which was
connected before)
2. Take out the earbuds from the
charging case
3. Quickly tap on the earbuds
for 5 times, and the white light
flashes, indicating that the reset
is complete
4. Place both earbuds inside the
charging case & repeat the pairing
process

9- CONTROLS
x 1
x 1
x 1
L
L
R
R
L
x 3
R

NOTE: Available only on devices that are Voice Assistant enabled.
x 2
x 2
x 4
x 3 sec
x 1
Touch and holdTapNote:
L
R
L
R
L
R