Crossbeats LOOP 300 User manual

USER MANUAL
LOOP

1. Premium metal body
3. Multifunction button
2. Silicone Eartips
4. Volume/track changing buttons
5. LED indicator
6. Microphone
OVERVIEW
7. USB Type-C Charging port
7

POWER ON
POWER OFF
Press and hold the MFB to turn ON
the neckband.
Press and hold the MFB to turn OFF
the neckband

CHARGING
1. Connect and use the Type-C cable provided in the box for charging
2. Full charge in less than 60mins.

Charging mode: –red light keeps blinking
Fully charged mode: – White light stays on
LED INDICATOR

PAIRING MODE
1 2After powering
on
The earbuds will
automatically enter
pairing mode
3
The indicator lights
red and white start
to blink alternatively
CB-Loop 300
CB-Loop 300
Note: If the device is already connected, then the earbuds will pair automatically

RESET
1. Ensure L&R earbuds are disconnected from all the devices,
(turn off the Bluetooth option on the device which was
connected before)
2. Long press ‘+’ and ‘-’ for 3 secs, then the red and white light
keeps blinking and the neckband enters the pairing mode.
3. Repeat the pairing process.
• Volume decrease: Press once the ‘-’ button to decrease
the volume
• Volume increase: Press once the ‘+’ button to increase
the volume
• Play/Pause: Press the multifunction button once
• Next track: Press and hold the ‘+’ button for 2 secs
• Previous track: Press and hold the ‘-’ button for 2 secs

• Volume decrease: Press once the ‘-’ button to decrease the volume
• Volume increase: Press once the ‘+’ button to increase the volume
• Play/Pause: Press the multifunction button once
• Next track: Press and hold the ‘+’ button for 2 secs
• Previous track: Press and hold the ‘-’ button for 2 secs
• Volume decrease: Press once the ‘-’ button to decrease the volume
• Volume increase: Press once the ‘+’ button to increase the volume
• Play/Pause: Press the multifunction button once
• Next track: Press and hold the ‘+’ button for 2 secs
• Previous track: Press and hold the ‘-’ button for 2 secs
CONTROLS
x 2 x 2
NOTE: Available only on devices that are Voice Assistant enabled.
x 1
Touch and holdTapNote:
x 1
• Volume decrease: Press once the ‘-’ button to decrease
the volume
• Volume increase: Press once the ‘+’ button to increase
the volume
• Play/Pause: Press the multifunction button once
• Next track: Press and hold the ‘+’ button for 2 secs
• Previous track: Press and hold the ‘-’ button for 2 secs
• Voice Assistants: Double press on the multifunction button
• Answer calls: Single press on the multifunction button
• Hang-up calls: Single press on the multifunction button
• Reject incoming calls: Double press on the multifunction button
• Game mode: Single press on the ‘G’ button to enter the
Gaming mode

CONTROLS Touch and holdTapNote:
• Voice Assistants: Double press on the multifunction button
• Answer calls: Single press on the multifunction button
• Hang-up calls: Single press on the multifunction button
• Reject incoming calls: Double press on the multifunction button
• Game mode: Single press on the ‘G’ button to enter the
Gaming mode