Crossbeats SPARK User manual

USER MANUAL
Spk

2.
3.
1. Touch control
Charging case LED
Microphone
6.
5.
4. LED lights indicators
Charging Pin
USB-C Charging Port
OVERVIEW

POWER ON
Take out the earbuds from
the charging case, it will
automatically power On.

Place the earbuds back in the
charging case, the earbuds
will power off automatically.
POWER OFF

CHARGING
1. Connect and use the Type-C cable provided in the box for charging
2. Full charge in less than 60mins.

LED INDICATOR ON CASE
While charging – The white light keeps blinking based on the charge level
Low Battery (less than 10%) – The first light will be on for 3 secs
Battery full – All 4 lights will be on
(4 lights – 100% power, 3 lights – 75% power, 2 lights – 50% power, 1 light – 25% power)
Current charge level – Check on the phone Bluetooth panel.

FIRST TIME PAIRING
1 2
Take out the
earbuds
from the
charging case
The earbuds
will auto
power ON
3 4
Search for
‘CB-Spark’ in
your phone’s
BT list
Click to
pair
CB-SPARK CB-SPARK

MONO PAIRING
For mono mode, take out
either of the earbuds
when already paired
The music will
automatically play in
that particular earbud

RESET
1. Ensure L&R earbuds are
disconnected from all the devices,
(turn off the Bluetooth option
on the device which was
connected before)
2. Put the earbuds in the
charging case.
3. Press and hold the reset button
on the case for 10 secs
4. The earbuds will flash red and
blue light upon available for pairing

CONTROLS
x 1
x 2
x 2
x 3
NOTE: Available only on devices that are Voice Assistant enabled.
x 3 sec
LEFT
Touch and holdTapNote:

Touch and holdTapNote:
x 4
x 1
x 3 sec
RIGHT
x 3 sec
x 2
x 2