Crown DSi 1000 User manual

DSi SERIES
The Crown®DSi 8M is a projection booth monitor designed to work with bi-amplified cinema systems using the Crown
DSi Series amplifiers. All controls necessary for daily operation
of the DSi 8M are easily accessible on the front panel. 8-channel
monitoring allows you to monitor either the processor or the
power amplifier’s outputs: L,C, R, Ls, Rs, Bsl, Bsr, and Sub in
any combination.
Input levels from the processor and power amplifier can be
adjusted independently. There are no huge level jumps when
switching between processor and power amplifiers. The
bargraph display can be calibrated to the reference level for your
theater. The projectionist can see auditorium levels instantly.
DSi Amplifier Features
• Intuitive front-panel LCD screen, automatic presets for popular
JBL cinema speaker systems for quick, easy configuration
• Onboard digital signal processing includes crossovers, EQ filters,
delay, and output limiting
• Computer connectivity via USB allows fast setup and configuration
with HiQnetTM System ArchitectTM software
• Rear-panel HD-15 connector provides easy input/output connectivity
between DSi amplifiers and new DSi 8M System Monitor
• Barrier strip outputs, removable Phoenix-style input
DSi 8M Features
• 25-pin D-sub connectors, plus removable terminal blocks and HD-15
for quick, hassle-free connections
• Designed to work with bi-amplified sound systems to monitor the high-
and low-frequency outputs from the left, center and right channels
Maximum average power in watts at 1 kHz with 0.5% THD.
*Maximum average power in watts at 1 kHz with 1% THD.
Power Output
2-ohm 4-ohm 8-ohm 4-ohm 8-ohm
Stereo Stereo Stereo Bridge- Bridge-
(per channel) (per channel) (per channel) Mono Mono
DSi 1000 700W*475W 275W 1400W*950W
DSi 2000 1000W*800W 475W 2000W*1600W
DSi 4000 1600W*1200W 650W 3200W*2400W
The Crown®DSi Series of power amplifiers provides onboard digital signal processing including crossovers, EQ filters, delay
and output limiting. A rear panel HD-15 connector provides easy
input/output connectivity between DSi amplifiers and the new DSi
8M System Monitor. All DSi amplifiers are THX®approved.
The intuitive front panel LCD screen guides installers through a
setup process—featuring presets for the industry-standard JBL
cinema loudspeaker systems—to make configuration quick and
easy. At the touch of a button, Crown’s DSi cinema amplifiers de-
liver perfectly matched performance with each award-winning JBL
ScreenArray system, making this the ultimate cinema solution.

DSi SERIES
Crown’s Three-Year, No-Fault, Fully Transferable Warranty
Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifier and
amplifier product—an unsurpassed industry standard. With this unprecedented No-Fault protection,
your new Crown amplifier is warranted to meet or exceed original specifications for the first three years
of ownership. During this time, if your amplifier fails, or does not perform to original specifications,
it will be repaired or replaced at our expense. About the only things not covered by this warranty are
those losses normally covered by insurance and those caused by intentional abuse. And the coverage is
transferable, should you sell your amplifier.
See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the
USA, please contact your authorized Crown distributor for warranty information or call 574-294-8200.
Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: [phone]
FAX: [phone]FAX
www.crownaudio.com
Specifications subject to change without prior notice. Latest information available
at www.crownaudio.com.
Crown and Crown Audio are registered trademarks; HiQnet and System Architect are
trademarks of Crown International. Other trademarks are the property of their respective
owners. Printed in U.S.A.
© 2007 Crown Audio®, Inc. 139725-2A 9/07
Construction
DSi Amplifiers
Chassis: Steel.
Cooling: Proportional speed fan with front-to-rear
airflow.
Dimensions: EIA Standard 19-in. rack mount width
(EIA RS-310-B), 3.5 in. (8.9 cm) high and 12.25 in.
(31.11 cm) deep behind mounting surface.
Net Weight: 19 lb (8.6 kg).
Shipping Weight: 22 lb (10.0 kg).
DSi 8M
Chassis: Steel.
Dimensions: EIA Standard 19-inch rack mount width
(EIA RS-310-B), 3.5 inches (8.9 cm) high and 9.625
inches (24.4 cm) deep behind front mounting surface.
Net Weight: 10 lb 2 oz (4.63 kg).
Shipping Weight: 16 lb (7.26 kg).
L Biamp
C Biamp
R Biamp
Sw Amp
LS/RS Amp
Bsl/Bsr Amp
Cinema Processor