Crux BTS-MZ1 Operator's manual

+ +
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.082020
BTS-MZ1
1 of 2
- Adds Bluetooth Music streaming to the Mazda radio with controls from the steering wheel control or radio buttons.
- USB music playback with track up, track down and folder controls from the radio or steering wheel controls.
- Adds 3.5mm auxiliary audio input.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
PRODUCT FEATURES:
NOTES:
1. Radio must have a 16-pin CD changer port.
2. Not compatible with vehicles with DVD Navigation or factory rear view camera.
INSTALLATION INSTRUCTIONS:
1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 16-pin CD changer port. If there is a connector plugged into this cavity, you need to unplug it.
3. Plug the WHITE 16-pin connector of the BTS-MZ1 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-MZ1 module and
run towards the desired location.
5. IfaUSBashdrivewillbeused,pluginamaletofemaleUSBcable(notincluded)totheBTS-MZ1moduleand
run to the desired location.
6. You can also mount the BTS-MZ1 to an accessible location such as the center console or glove box, to use the
3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
Bluetooth Audio Streaming, USB Music Player and Auxiliary
Audio Input for Select Mazda Vehicles

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.0820202 of 2
VEHICLE APPLICATIONS:
1. Pop-in magnec head to base socket.
2. Tighten locking nut to desired lt.
3. Slide into the AC vent grille.
4. Use the desired metal plate size and sck on the back of
the phone or insert behind the phone case.
MAGNETIC PHONE MOUNT ASSEMBLY AND USE:
OPERATION:
For Bluetooth funcon:
1. Turn on the radio and press the CD buon. Screen will show “CD1 01”.
2. Go to the Bluetooth menu on your phone and connect to “Crux Audio BT”.
3. BTS-MZ1 will announce when the phone has been connected.
4. Play the music on your phone or other audio player and audio should be heard on the factory sound system.
5. Use the steering wheel control or radio buons to track up and track down.
For USB Mode:
1. Plug in your USB ash drive to the BTS-MZ1 USB port.
2. Turn on the radio and press the CD buon. Screen will show “CD1 01”.
3. BTS-MZ1 will announce “USB Mode”.
4. USB Audio should be heard on the factory sound system. Use the steering wheel control or radio buons to track up and track down.
For Line-In Mode:
1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-MZ1 USB line-in jack.
2. Turn on the radio and press the CD buon. Screen will show “CD1 01”.
3. BTS-MZ1 will announce “Line-In Mode”.
4. Plug the other end of the 3.5MM cable to the audio player and press play. Audio should be heard on the factory sound system.
To Toggle Between Sources:
Use the “REPEAT (RPT)” buon to toggle to AUX Input and “RANDON (RDM)” to toggle to Bluetooth or USB whichever one is connected.
You cannot toggle between Bluetooth and USB. Note that the USB takes precedence between the 3 inputs.
MAZDA
2004-2005
2002-2005
2002-2005
2001-2003
2001-2003
2004-2005*
Mazda 3
Miata
MPV
Protege
Protege 5
RX8
*Must have radio version 9.55 - To determine radio version, press and hold the “text” buon then press and hold the “preset 1” buon unl
the version number appears on the display.
NOTES:
1. The BTS-MZ1 takes the place of the factory external CD Changer.
2. Does not have Bluetooth Handsfree funcon.
+ +
R
INTERFACING SOLUTIONS
BTS-MZ1
Bluetooth Audio Streaming, USB Music Player and Auxiliary
Audio Input for Select Mazda Vehicles