CSI AWK-3501 User manual

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
1
AWK-3501 Series
15” TFT Flat-panel
Industrial Workstation

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
2
Copyright Notice
This document is copyrighted, 2004. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties, which may result from its use.
The material is this document is for product information only and is subject
to change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, AAEON, assumes no
liabilities resulting from errors or omissions in this document, or from the
use of the information contained herein.
AAEON reserves the right to make changes in the product design without
notice to its users.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
3
Acknowledgments
AMD is a trademark of Advanced Micro Devices, Inc.
AMI is a trademark of American Megatrends, Inc.
Award is a registered trademark of Award Software International, Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2 are trademarks of International Business Machines
Corporation.
Intel and Pentium are registered trademarks of Intel®Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
SMC is a trademark of Standard Microsystems Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
SiS is a trademark of Silicon Integrated Systems Corp.
VIA is a trademark of VIA Technology, Inc.
All other product names or trademarks are properties of their respective
owners.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
4
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
nAWK-3501 series Industrial workstation
nCD-ROM
Contains User’s Manual, Drivers and Utilities
nAccessories
-Screws bag
-Mounting brackets
-VGA Cable
-Power cord
nWith Touch Screen Option
-RS-232 cable for 2.0 pitch and 2.54 pitch
If any of these items are missing or damaged, you should contact your
distributor or sales representative immediately.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
5
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it
or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or electrical
shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
6
14. If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT.
FCC Safety
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
7
Contents
Copyright Notice...............................................................2
Acknowledgments ............................................................3
Packing List.......................................................................4
Safety & Warranty ............................................................5
FCC Safety........................................................................6
General Information..................................................................8
Introductions......................................................................9
Features............................................................................10
Specifications.................................................................. 11
Dimensions......................................................................15
Hardware Installation..............................................................16
2.5” HDD Installation.....................................................17
3.5” HDD Installation.....................................................18
VGA Cable Installation ..................................................19
USB/Touch pad cable to CPU card Installation............20
Touchscreen cable to CPU card Installation .................21
BIOS & Jumper Setting.......................................................22
Drivers Installation..................................................................24
CPU Card Drivers Installation.......................................26
Touch Pad Drivers Installation.......................................26
On Screen Display Control.....................................................27
On Screen Display (OSD) Controller............................28
Troubleshooting..............................................................32

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
8
General
Information
Chapter
1

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
9
Introductions
The AWK-3501 series Industrial workstation are PC-based industrial
computers that are designed to serve specifically for the factory floor and
other harsh industrial environments. This 19" rack/panel-mount workstation
offers full state-of-the-art industrial computing technology packaged within
one compact unit. They are bare-bone PC-based systemsthat could be
configured with different levels of full size CPU cards with a 15”XGA
(1024 x 768) color TFT high brightness, long lifetime LCD displays.
AWK-3501 are equipped with Analog VGA input 15”LCD monitor,
customer can easily choose any type of CPU cards with on-board VGA
function. A heavy-duty steel chassis and aluminum alloy front panel is
designed for any harsh environment of industrial standards.
The front panel of AWK-3501 series could be opened;removable HDD,
CD-ROM and FDD are protected with the front panel. The removable
HDD is anti-vibration disk drive bay for 2.5” HDD that easy for install.

Industrial Workstation AWK-3501
AWK-3501 Series User Manual V1.0
10
Features
l15”XGA color TFT LCD display
lAnalog VGA signal input
lIntegrated touch pad on the front panel
lOSD (On Screen Display) function for display adjustment
lHeavy-duty steel chassis and aluminum alloy front panel
lWater-proof front panel with IP-65 certification
l10 slots ISA/PCI-bus passive backplane
lAnti-vibration disk drive bay for HDD
lHold-down clamp to protect add-on cards from vibration
lEasy-disassembled cooling fan filter
lP3 (SBC-780) or P4 (SBC-860) level full-size CPU card
(optional)
lResistive Touchscreen (optional)