CTA PAD-ASVEB User manual

Acrylic Security VESA Enclosure
PAD-ASVEB / PAD-ASVEW
INSTALLATION - MANUAL
INSTALLATION:
1.Removing enclosure top :
1A. Align the security star keys x2 (D) and insert it
one in the front screw (B) and one in the Back
screw (C) as shown.
1B.While holding the back security star key (D) tight in
place Turn the front security star key (D) counter
clock-wise until all 4 Screws(B) are unscrewed.
D
B
CONTENTS:
x4
x4
Flat Head
Star Screw
x1
Enclosure
B
A
CD
x2
Rounded Head
Star Screw
Security
Star Key
1C. Separate front part of enclosure (A) as shown.
A
D
B

2.Inserting the tablet :
3. Attach enclosure top :
Rotation Details
3A. Take the detached enclosure top (A), align the corner holes with the bottom portion. Then use the provided
security star key (D), turn in clock-wise the star screws until securely tightened while holding the security star
key (D) on the other side with your other hand. Screw in until securely tightened.
Can install the enclosure in surface either portrait or
landscape mode as needed.
2A. Using one of the compatible listed tablets, insert into the foam adapters for a secure and tight fit.Insert
tablet in back part of enclosure (A) as shown. Watch out orientation of tablet.
A
D
A
B