CTA ADD-2VDMB User manual

Dual VESA Desk Mount
w/ Storage Compartment
ADD-2VDMB/ ADD-2VDMW
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
1. Mounting Setup
x1
M5 Allen Key
M5 x 8
M5 Nut
M5 x 12
AB
(x4) B
(x4) H
(1) M6 Allen key
(x4) J
x4
C D E F G
x8 x8 x4 x1 x1
1A. When mounting into a surface for a desk
mount mode, use (4) Component B screws and
anchors. Using a screwdriver (not provided),
rotate in until securely tightened as shown above.
1A. When mounting into CTA Digital’s
ADD-PARAFS2 stands, use the provided allen
key tool and (4) of Component H & J as shown.
M6 x 16
x4 x4
H J

888-733-4448
Align VESA holes of CTA’s paragon enclosure with the
desk mount VESA holes. Using the included allen key
tool (component F), rotate in screws (component C) while
holding hex nut (component D) until securely tightened.
How to Attach to CTA’s Paragon Enclosure
**Enclosure is for
illustration purposes and
not included
D (4)
C (4)
How to Cable Route and Accessing Back Storage Area
Unlock back storage area using keys (component G). Fish through the
holes your cable as shown into the back storage area. Fish though the
holes at the bottom to go into kiosk of behind the surface service areas
to keep wires hidden. Place any small charging items, device or
accessories as needed as long as they fit into the space.