CTA PAD-MSPC10 Series User manual

Magnetic Splash-Proof Case
with Metal Mounting Plates and Table Stand
for iPAD 8th Gen 10.2”, iPad Air 4, iPad Pro 10.5” and More
888-733-4448
CONTENTS:
x1 x1
1. Peel the external
silicone sleeve from the
internal hard case.
2. To open internal hard case,
apply gentle pressure to the
small clips (as shown to the
left). The case will open with all
(4) sides are unclipped.
3. Insert tablet into the back
portion of the hard cover.
5. Place on the external
silicone rubber sleeve over the
hard case again.
1.Locate tablet case and insert device.
INSTRUCTIONS:
**Stand comes fully assembled
Take a PAD-MSPC10 series case and align PAD-MSPC10 series case
magnets to the (4) corners of the metal stand. Adjust omni-directionally
and tilt to your preference.
2.Placing magnetic tablet case on stand
4. Clip the front screen with the
back portion of the hardcover
around all the edges.

1 2 3
888-733-4448
How to fold out tablet kickstand:
1. Locate kickstand at case rear and fold out underneat strap
2. Display tablet at desired viewing angle
3. Push kickstand back into the original spot to return to handheld mode.