CTC Union FRM220 User manual

cover
FRM220 Chassis QIG
[e-mail]

FRM220 Chassis QIG
Version 1.0 May, 2020
This QIG supports the following models:
- CH01 - CH01-XX - CH01M-XX
- CH02M-XX - CH02-NMC-XX - CH02-SMT-XX
- CH04A-XX - CH08 - CH20
(Where XX is AC, DC, AA, DD, or AD power options.)
To download this QIG, please visit https://www.ctcu.com/en/download.html
2020 CTC Union Technologies Co., LTD.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St.,
Neihu, Taipei 114, Taiwan
T [phone]
F [phone]
E[email protected]
Hwww.ctcu.com

Table of Contents
cover.......................................................................................................................................... 1
Introduction............................................................................................................................... 6
FRM220-CH01 Single Slot Stand-alone Chassis...................................................................... 7
INSTALLATION ................................................................................................................................................... 7
WALL MOUNTING..............................................................................................................................................7
FRM220-CH01/xx Single Slot Stand-alone Chassis with Built-in Power................................. 8
INSTALLATION ................................................................................................................................................... 8
POWER CONNECTION..........................................................................................................................................8
WALL MOUNTING..............................................................................................................................................9
FRM220-CH01M/xx Single Slot Chassis w/ Built-in Power and Console.............................. 10
INSTALLATION ................................................................................................................................................. 10
WALL MOUNTING............................................................................................................................................ 10
POWER CONNECTION........................................................................................................................................ 11
FRM220-CH02M-xx Two Slot Standalone Chassis with Console Port.................................. 12
INTRODUCTION................................................................................................................................................ 12
PANELS ......................................................................................................................................................... 13
INSTALLATION I................................................................................................................................................ 14
INSTALLATION II............................................................................................................................................... 14
INSTALLATION III.............................................................................................................................................. 14
RACK MOUNTING OPTION I................................................................................................................................ 15
RACK MOUNTING OPTION II............................................................................................................................... 15
WALL MOUNTING OPTION................................................................................................................................. 15
FRM220-CH02/SMT Two Slot Standalone Chassis................................................................ 16
DESCRIPTION .................................................................................................................................................. 16
PANELS ......................................................................................................................................................... 17
LED INDICATORS ............................................................................................................................................. 17
POWER &COOLING FAN FAILURE DETECTION FUNCTION........................................................................................... 18
INSTALLATION I................................................................................................................................................ 18
RACK MOUNTING OPTION ................................................................................................................................. 18
WALL MOUNTING OPTION................................................................................................................................. 18
FRM220-CH02/NMC................................................................................................................. 19
DESCRIPTION .................................................................................................................................................. 19
PANELS ......................................................................................................................................................... 20
LED INDICATORS ............................................................................................................................................. 20
INSTALLATION ................................................................................................................................................. 20
RACK MOUNTING OPTION I................................................................................................................................ 21
RACK MOUNTING OPTION II............................................................................................................................... 21
WALL MOUNTING OPTION................................................................................................................................. 21
FRM220-CH04A Four Slot Stand-alone Chassis.................................................................... 22
INTRODUCTION................................................................................................................................................ 22
DESCRIPTION .................................................................................................................................................. 22
CHASSIS FRONT DESCRIPTION ............................................................................................................................. 22
CHASSIS REAR DESCRIPTION ............................................................................................................................... 22
CHASSIS PHYSICAL DIMENSIONS........................................................................................................................... 23
CHASSIS SPECIFICATIONS.................................................................................................................................... 23
INSTALLATION ................................................................................................................................................. 24
SITE PREPARATION ........................................................................................................................................... 24
MECHANICAL ASSEMBLY.................................................................................................................................... 24
RACK MOUNTING ............................................................................................................................................. 24
ELECTRICAL INSTALLATION.................................................................................................................................. 24
NMC (SNMP) ............................................................................................................................................... 25
NMC CARD INSTALLATION ................................................................................................................................. 25
LINE CARD INSTALLATION................................................................................................................................... 25
FRM220-CH08 Eight Slot 19" 1RU Managed Chassis............................................................ 26
INTRODUCTION................................................................................................................................................ 26
FUNCTIONAL DESCRIPTION ................................................................................................................................. 26
CHASSIS FRONT DESCRIPTION ............................................................................................................................. 26
LED INDICATORS AND ALARM RELAY .................................................................................................................... 27
CHASSIS REAR DESCRIPTION ............................................................................................................................... 27
CHASSIS PHYSICAL DIMENSIONS........................................................................................................................... 27
CHASSIS SPECIFICATIONS.................................................................................................................................... 28
NMC (SNMP) ............................................................................................................................................... 28
LINE CARD OPTIONS .......................................................................................................................................... 29
INSTALLATION ................................................................................................................................................. 29
SITE PREPARATION ........................................................................................................................................... 29

FRM220 Chassis Quick Installation Guide
5
MECHANICAL ASSEMBLY.................................................................................................................................... 29
RACK MOUNTING ............................................................................................................................................. 29
POWER/FAN MODULES REMOVAL/REPLACEMENT ................................................................................................... 30
ELECTRICAL INSTALLATION.................................................................................................................................. 30
ALARM INSTALLATION ....................................................................................................................................... 30
NMC CARD INSTALLATION ................................................................................................................................. 31
LINE CARD INSTALLATION................................................................................................................................... 31
FRM220-CH20 Twenty Slot 19" 2RU Managed Chassis ........................................................ 32
INTRODUCTION................................................................................................................................................ 32
FUNCTIONAL DESCRIPTION ................................................................................................................................. 32
CHASSIS FRONT DESCRIPTION ............................................................................................................................. 32
CHASSIS REAR DESCRIPTION ............................................................................................................................... 33
CHASSIS PHYSICAL DIMENSIONS........................................................................................................................... 33
CHASSIS SPECIFICATIONS.................................................................................................................................... 34
NMC (SNMP) ............................................................................................................................................... 34
LINE CARD OPTIONS .......................................................................................................................................... 35
INSTALLATION ................................................................................................................................................. 35
SITE PREPARATION ........................................................................................................................................... 35
MECHANICAL ASSEMBLY.................................................................................................................................... 35
RACK MOUNTING ............................................................................................................................................. 35
FAN UNITS REMOVAL/REPLACEMENT ................................................................................................................... 36
ELECTRICAL INSTALLATION.................................................................................................................................. 36
ALARM INSTALLATION ....................................................................................................................................... 37
CHASSIS CASCADE ............................................................................................................................................ 38
POWER MODULES REMOVAL/REPLACEMENT.......................................................................................................... 39
LINE CARD INSTALLATION................................................................................................................................... 40
NMC CARD INSTALLATION ................................................................................................................................. 40
FRM220 Management Quick Start.......................................................................................... 41
INTRODUCTION................................................................................................................................................ 41
MANAGEMENT METHODS.................................................................................................................................. 41
CONSOLE TERMINAL ......................................................................................................................................... 41
TERMINAL CONNECTION &SETTINGS .................................................................................................................... 41
TERMINAL LOGIN ............................................................................................................................................. 41
TCP/IP SETUP ................................................................................................................................................ 42
TEST TCP/IP CONNECTION ................................................................................................................................ 42
TELNET TERMINAL............................................................................................................................................ 43
WEB BASED MANAGER ..................................................................................................................................... 43

FRM220 Chassis Quick Installation Guide
Introduction
There are many chassis options for FRM220 line cards. Not all chassis options apply to every line
card model. Chassis range from the simplest CH01 standalone chassis which provides only physical
protection for a one slot line card and includes a 12V@1A (12watt) switching power adapter (wall wart)
to a 20 slot, 2U rack chassis with dual, swappable fans and AC or DC power modules.
This guide will give installation details for each chassis option, including card installation, physical
mounting, power connections and Earth grounding.
This guide is now only available in electronic (PDF) format.
Please skip ahead to your exact chassis model.
CH01
CH01-xx
CH01M-xx
CH02M-xx
CH02-NMC-xx
CH02-SMT-xx
CH04A-xx
CH08
CH20
FRM220 NMC Management Quickstart

FRM220 Chassis Quick Installation Guide
7
FRM220-CH01 Single Slot Stand-alone Chassis
The FRM220-CH01 is designed for tabletop or bench installation. A card slides into the chassis for
a complete, assembled, stand-alone unit. AC power is supplied to FRM220-CH01 through an external
switching AC adapter. (12VDC at 1A)
Installation
Remove the card carefully from packaging after first touching a grounded object, to remove static
charge from your body. Hold the card by the metal face plate and NEVER touch any components on
the board. Align the card with the slots of the CH01 chassis and slide the card all the way in. The DC
power jack will be flush with the rear of the chassis. Use the thumb screw to secure the card,
tightening it only hand tight.
Figure: CH01 Installation
The grounding terminal accepts a 3mm screw (not included). As no ground is provided by the AC
power adapter, connecting an Earth ground to the chassis will provide safety from shock, surge
protection, and through shielding, will reduce both the device's emissions and susceptibility to other
devices' emissions.
Wall Mounting
FRM220-CH01 standalone chassis has the option of adding wall mount capability. One wall mount
kit is required for installing a single standalone chassis on the wall. Each wall mount kit provides a wall
mounting bracket and the screws to attach the bracket to the CH01 chassis. Screws to attach to a wall
are not included.
Use the bracket as a template for drilling holes in a wall and attaching screws. Screws should be
chosen that allow the screw head to pass through the hole in the bracket. The screws in the wall
should be screwed in leaving just enough space so the bracket and CH01 can be hung securely.
Figure: CH01 with Wall Mount Bracket
Operation & Storage Temperature :
- Operating Temperature -- -10°C –60°C
- Storage Temperature -- -20°C –70°C
- Humidity -- 10 –90%
Dimension and Weight: ( W x D x H ) mm
- 88 × 141 × 23 mm
- 358g
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following
technical standards: EN 55022:1994/A1:1995/A2:1997 Class A and EN61000-3-2:1995, EN61000-3-
3:1995 and EN50082-1:1997
Grounding
Terminal
DC Input Jack

FRM220 Chassis Quick Installation Guide
8
FRM220-CH01/xx Single Slot Stand-alone Chassis with Built-in Power
The FRM220-CH01/xx is designed for tabletop or bench installation. A card slides into the chassis
for a complete, assembled, stand-alone unit. This chassis features single or dual built-in power
supplies. The build-in AC power supply supports power input from 90~264VAC via an industry
standard IEC power connector. Built-in DC power supplies use a screw terminal block to connect DC
voltage and supports a range of 18~75VDC. Power options include single AC or DC, dual AC
(redundant), dual DC (redundant) or with one AC and one DC (redundant) power supplies.
Installation
Remove the card carefully from packaging after first touching a grounded object, to remove static
charge from your body. Hold the card by the metal face plate and NEVER touch any components on
the board. Align the card with the slots of the CH01/xx chassis and slide the card all the way in. Use
the thumb screw to secure the card, tightening it only hand tight.
Figure: CH01/xx Installation
Power Connection
The graphic below shows the power connections for the CH01-AD, with one DC and one AC power
supply. When two supplies are connected, they are redundant, and the installed card device will
continue operation if only one supply is active.
The DC input utilizes a screw terminal block. Follow the proper polarity for DC, attaching the
negative DC voltage lead to the "-V" terminal and the positive DC voltage lead to the "+V" terminal.
Connect an Earth ground lead to the terminal marked "FG" (frame ground). DC voltage range input is
from 18 to 75VDC.
For AC power input, just firmly seat the IEC type power plug into the jack. The AC voltage range is
100-240VAC +/- 10%. As long as the AC source is grounded, the ground will connect to the CH01/xx
chassis from the IEC connector.
Each power supply has a respective toggle switch which then sends the input power to the internal
supplies. The switch is OFF when set to "0" (zero) and is ON when switched to "1" (one).
Figure: CH01-AD Power Connections
Operation & Storage Temperature :
- Operating Temperature -- -10°C –60°C
- Storage Temperature -- -20°C –70°C
- Humidity -- 10 –90%
Dimension and Weight: ( W x D x H ) mm
- 135 × 198 × 32
- 725g (Single Power), - 770g (Dual Power)

FRM220 Chassis Quick Installation Guide
9
Wall Mounting
FRM220-CH01/xx standalone chassis has the option of adding wall mount capability. Two wall
mount kits are required for installing a single standalone chassis on the wall. Each wall mount kit
provides one wall mounting brackets and the screws to attach the bracket to the CH01/xx chassis.
Screws to attach to a wall are not included.
Use the brackets as a template for drilling holes in a wall and attaching screws. Screws should be
chosen that allow the screw head to pass through the hole in the bracket. The screws in the wall
should be screwed in leaving just enough space so the bracket and CH01/xx can be hung securely.
Figure: CH01/xx with Wall Mount Bracket
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following
technical standards: EN 55022:1994/A1:1995/A2:1997 Class A and EN61000-3-2:1995, EN61000-3-
3:1995 and EN50082-1:1997

FRM220 Chassis Quick Installation Guide
10
FRM220-CH01M/xx Single Slot Chassis w/ Built-in Power and Console
The FRM220-CH01M/xx is designed for tabletop or bench installation. A card slides into the
chassis for a complete, assembled, stand-alone unit. This chassis features single or dual built-in
power supplies. The build-in AC power supply supports power input from 90~264VAC via an industry
standard IEC power connector. Built-in DC power supplies use a screw terminal block to connect DC
voltage and supports a range of 18~75VDC. Power options include single AC or DC, dual AC
(redundant), dual DC (redundant) or with one AC and one DC (redundant) power supplies. A Female
DB9 provides local management via serial console (RS232).
Installation
Remove the card carefully from packaging after first touching a grounded object, to remove static
charge from your body. Hold the card by the metal face plate and NEVER touch any components on
the board. Align the card with the slots of the CH01M/xx chassis and slide the card all the way in. Use
the thumb screw to secure the card, tightening it only hand tight.
Figure: CH01M/xx Installation
The DB9F is a DCE to a PC's DTE COM port, providing a simple 1:1 connection with the supplied
DB9F to DB9M 1 meter cable. See the technical sheet for the installed card to understand the serial
port settings required to manage that card.
Wall Mounting
FRM220-CH01M/xx standalone chassis have the option of adding wall mount capability. One wall
mount kit is required for installing a single standalone chassis on the wall. Each wall mount kit
provides two wall mounting brackets and the screws to attach the bracket to the CH01M/xx chassis.
Screws to attach to a wall are not included.
Use the brackets as a template for drilling holes in a wall and attaching screws. Screws should be
chosen that allow the screw head to pass through the hole in the bracket. The screws in the wall
should be screwed in leaving just enough space so the bracket and CH01M/xx can be hung securely.
Figure: CH01M/xx with Wall Mount Bracket