CTM LYNG Microsafe mKomfy Hybrid R-T User manual

mKomfy Hybrid
165
ALARM SIGNALS
CTM Lyng AS is Norway’s leading manufacturer
and supplier of security products for the home,
assistive technology, energy efficiency, and light
and heating control for all building types under
the mKomfy®, mTouch®, Microsafe®and Centrol®
brands. We distribute our products through electrical
wholesalers. We offer everything from product
development to production and distribution.
Our production facility in Vanvikan is equipped with
some of the most advanced machinery in Europe.
For more information, visit us at
www.ctmlyng.no
If you have further questions or require
assistance, please contact our support on
Tel: [phone]
Email: [email protected]
Thank you for choosing a product from CTM Lyng AS
User Instructions
1721 Art. No.: 13881
6251630 mKomfy Hybrid 25R
6251631 mKomfy R-T Hybrid
6251635 mKomfy Hybrid 400R
6251636 mKomfy Hybrid 400R Plug&Play
6251615 mKomfy Hybrid Sensor
Technical data
mKomfy Hybrid sensor
Batteries*:
3 x AA/LR06
Battery life:
Up to 3 years
RF:
868.100 MHz
+5 dBm
Cooker guard type:
Class B
Power supply*:
USB 2.0 micro B, 5 VDC, min. 1 A
*Batteries and power supply
cannot be used at the same time
SAVE THESE INSTRUCTIONS
EMERGENCY MODE
In the event of problems with the cooker guard that you are
unable to resolve, you can activate emergency mode, which
connects power to the cooker for 12 hours (can be repeated
for a further 12 hours). NB: All safety functions are deactivated in
this period. Use the time to contact an electrician who will be able to
resolve the problem.
To activate emergency mode:
Turn the cooker fuse off and on three times at intervals of at
least 1 second for a period of 10 seconds.
Alarm signal: One (1) light and sound signal every
15seconds for 5 minutes.
Cause: Cooker guard warning that timer is in
last 5 minutes.
Action: Press control button to restart timer.
Alarm signal: Five (5) light and sound signals in the course
of 5 seconds.
Cause: Anti-tamper function detects that sensor
has been removed from bracket.
Action: Replace sensor in bracket and press
control button.
Alarm signal: Two (2) light and sound signals every
5minutes.
Cause: Battery change necessary.
Action: Change batteries. NB: Make sure you have
new batteries to hand first (3 x AA).
Alarm signal: Three (3) light and sound signals every
5seconds and a steady red light between
signals.
Cause: Overheating.
Action: Reduce temperature, or press control
button to temporarily approve high
temperature.
Alarm signal: Two (2) light and sound signals and the
cooker shuts off 10 min. after use.
Cause: Battery change necessary.
Action: Change batteries. NB: Make sure you have
new batteries to hand first (3 x AA).
Alarm signal: Three (3) light and sound signals every
30seconds.
Cause: High temperature continuing after shut-off.
Action: Reduce temperature, or press
control button.

432
SAFETY FUNCTIONS EVERYDAY USE BATTERIES
The mKomfy Cooker Guard is a safety product
that has been developed to prevent fires
whencooking.
The mKomfy Hybrid is a “Class B” cooker
guardand does not react to flames or smoke.
It relies on a clear view from the sensor to
thehob in order to detect heat.
The cooker guard will therefore be unable
to prevent a fire if the hob is covered
with flammable materials (e.g. cardboard,
newspaper), or if such materials catch
firenearthe hob.
In order to avoid false alarms, the cooker
guard spends a short amount of time
analysing the information from the hob.
Hobspowerful enough to start a fire in under
120 seconds work so quickly that the cooker
guard may find it hard to react before a fire is
ignited, depending on the cookware and the
substancesin it on the hob.
The product assumes normal care in the use of
the cooker and associated cookware.
In normal use the cooker should be kept under
frequent observation, even if safety equipment
such as mKomfy is installed.
The product must be installed and maintained
correctly as described, and may only be fitted by an
authorised electrician.
Things to think about when cooking
Sliding a pan across to another ring will expose
a very hot surface, and the Cooker Guard may
register this as overheating, causing the alarm
to go off.
Use pans that cover the whole ring to reduce
the chance of unwanted temperature alarms.
Skins for the front panel
Optional extras
Optional extras can be connected
to your cooker guard to increase
safety or cover additional needs –
see separate user instructions.
External
reset button
External
master switch
mTouch®
HUB
Power Break
The cover should be cleaned
regularly with a damp cloth
and soapy water.
Press the control button to:
• Reset alarm
• Extend cooking time
• Reset cut-out
Alarm
visual/audible Batteries (does not apply if an external power supply
isused)
We recommend changing the batteries
every year or if there is a low battery
warning.
On our website, you can find
dimensioned sketches for making your
own skins, which you can cut to size and
position under the sensor’s front panel.
See www.ctmlyng.no/hybrid
1. Remove the sensor from the bracket.
2. Change the batteries (3 x “AA”).
3. Put the sensor back in the bracket.
4. Give the control button a quick press. There will be
abeep if the batteries have been changed correctly.
Taking the sensor off/putting the sensor on the sensor bracket
(back cover)