Ctronics CTIPC-260CWS User manual

www.ctronicssecuritycameras.com
1
Wireless WIFI hot point mini dome camera
Camera integrated speed dome
user manual

www.ctronicssecuritycameras.com
2
CTIPC-260CWS
Please read the installation instructions before you operate it.
Ⅰ：User instructions
Thank you for using our INTELLIGENT SPEED DOME CAMERA
According to our introduction of guarantee，Within the specified warranty period，our
company will repair or replace parts that are damaged under normal use .User don’t
disassemble repair itself without Our Consent. Within the specified warranty period, we
will repair or replace parts (excluding cable, housing and bracket) that are damaged
under normal use (by judge of us) at no additional charge.
Free services and repairs will not be covered under the following conditions
1、 Unauthorized repair or disassembly of the product ;
2、 Damage due to the bad shipping, or Move of discharging ;
3、 Damage due to the user not according to the user manual to operate, maintain,
maintenance，such as falling、extrusion、flooding water、be affected with damp、
corrosion and Other damage caused by human factor ;
4、 The product faulty caused by the overloaded or the working environment which
is not suitable for it, and surface damaged when you using it ;
5、 Any damage or ruin by force majeure.
Friendly suggestion ：in order to realize the whole function of our products ，
Compatibility tests must be conducted before using a third-party product In the
system .
Ⅱ、Product feature
 4" elegant appearance,housing rotates follow the camera lens, IR light will not
be hided by the cover, set the Address Code & Baud Rate, no need to open the
PTZ housing, more convenient．
 Drove by bearing and belt, more stable and smooth, long performance life．
 Using import belt drive，Running more stable, more reliable and noiseless．
 Using import stepper motor，responsive、fixed position accurately．
 SEL imported super brightness Array IR LED, effective night vision distance is
80 m．
 Control protocol adaptive, communication baud rate adaptive, no more need

www.ctronicssecuritycameras.com
3
complexly set, Greatly facilitate the use of the user
 Different angles of infrared right according to the changes of the lens
change times lead to visual Angle on or off in stages, make the IR light
illuminate Angle and lens viewing angles consistent, effectively solve the
ordinary infrared machine due to the small Angle change times high power IR
light in the visual Angle when open comes to the lens "flashlight" phenomenon,
and make the irradiation Angle difference from the viewing Angle of current
camera for the IR light producing periodic rest, reduce the infrared lamp panel
working current, effectively control components of dark current and calorific
value, greatly improved the integration of cameras work environment. Really
improve the machine service life and stability.
 Decoder board supply power to motor, camera and IR LED separately,
machine can works more stable.
 Using conducting ring, realize continuously rotate for 355° and avoid the
wires twist together.
 80 preset positions; 8 tour routes, 1 fixed monitoring position, can set
stay time for each preset positions as 5 / 10 / 15/…/ 55 / 60 seconds, can set
limitation positions on left and right, internal data will not lost after power off.
 Angle speed：horizontal 355°Rotation 0.1°- 40°/ sec；vertical 0 ～ 90°
rotation. 0.1°- 40°/ sec
Ⅲ：Main technical parameters
1、Electricity
Power supply： DC12V—3000mA

www.ctronicssecuritycameras.com
4
PTZ drive： DC12V—500mA
IR light power supply： DC12V—1800mA
lens Drive： DC12V—200mA
Camera power supply： DC12V—200mA
Other: DC12V—300mA
Retrofitting Temperature controlling device
Working temperature： -25℃ ～ +55℃
Address range ： 1 ～ 255
Communication mode ： RS485
Protocol ： support various protocol
Baud rate ： 2400bps 、 4800bps 、 9600bps 、 19200bps Auto
Controlling Equipment: Video Matrix 、 industrial control DVR 、 DVR 、 NVR 、 controlling
keyboard etc.
Preset: 255 presets,1-80 for dome, other for special function
inspection teams ： 8 groups
stay time for each preset positions ： 5*n seconds adjustable （ 1 ≤ n ≤ 20 ） .
2、
Mechanical Specifications
PTZ rotation angle: horizontal 355 ° unlimited rotation, vertical 0 °～ 90 °
PTZ rotation speed ： horizontal 0.1°- 40° / sec ， vertical 0.1°- 40° / sec
Rotation limit ： horizontal is adjustable in the range PTZ rotation angle of 355 °，
software and photoelectricity limit
3 、 Environment
Working temperature ： -25 ℃ ～ +55 ℃ （ temperature control ） : Built-in 45 ℃
environment temperature.
Working humidity ： 90% RH
Ⅳ：Setup connection and Matching device

www.ctronicssecuritycameras.com
5
1、
matching device such as Table 1：
Table 1：
matching device
Product Installation Holder Power
High Speed
Dome
wall
mounting wall bracket
DC12V
3A
The power cable
NET
hoisting
hoisting
bracket
SIZE PHOTO
www.ctronicssecuritycameras.com
cable
The power cable
,
NET
cable

www.ctronicssecuritycameras.com
6
3、IP dome signal of the camera and power cable connection please reference
chart
Ⅴ:Address, Protocol, Baud rate setting
Integrated High Speed Dome Camera built-in decoder .You can setting the
address, the Protocol and the baud rate are adaptive. This product designed the
dial switch located on the sphere, given the set of convenient and stability,
there is a piece of gusset plate under the ball cover which can open and close at any time.
Open the gusset plate can see an 8-bit dial switch.1-8 of dial up used to set address
code of the dome.
１、Address setting
No.1~ No.8 are use to set the address codes of the bits dial switch, you can set
address codes within the range 1~255, factory default as 1. Use binary, dial every
number to be "ON" is means as 1, dial to be "OFF" is means as 0, details please
reference the sheet 2.
Address codes and dial codes switch sheet (Binary), calculate it according to
this sheet：
Binary Add
Brinary
Add
Binary Add
Brinary Add

www.ctronicssecuritycameras.com
7
00000000
0 11110000
15 01111000 30 10110100 45
10000000
1 00001000
16 11111000 31 01110100 46
01000000
2 10001000
17 00000100 32 11110100 47
11000000
3 01001000
18 10000100 33 00001100 48
00100000
4 11001000
19 01000100 34 10001100 49
10100000
5 00101000
20 11000100 35 01001100 50
01100000
6 10101000
21 00100100 36 11001100 51
11100000
7 01101000
22 10100100 37 00101100 52
00010000
8 11101000
23 01100100 38 10101100 53
10010000
9 00011000
24 11100100 39 01101100 54
01010000
10 10011000
25 00010100 40 11101100 55
11010000
11 01011000
26 10010100 41 00011100 56
00110000
12 11011000
27 01010100 42 10011100 57
10110000
13 00111000
28 11010100 43 01011100 58
01110000
14 10111000
29 00110100 44 11011100 59
２、Baud rate setting (The baud rate is adaptive , this part is only the setting of
reference on the previous products)
Baud rate can set through the 4th ~5th dial codes，Can be set up the baud rate to
2400BPS、4800BPS、9600BPS、19200BPS。dial every number to be "ON" is means
as 1, dial to be "OFF" is means as 0，Baud rate and dial codes switch matching sheet
reference sheet 3 .
sheet3
：
Baud rate and dial codes switch matching sheet
Dial codes 2400 bps 4800 bps 9600 bps 19200 bps
No.4 OFF ON OFF ON
No.5 OFF OFF ON ON
３、Protocol setting

www.ctronicssecuritycameras.com
8
Decoder of Speed dome will automatically match protocol，you don't need to set；
PELCO_D、PELCO_P support PELCO_D and PELCO_P
Ⅵ：Function setting
１、Set/call preset
Preset function refers to through controlling equipment setting / call IR dome position
parameters of the horizontal Angle and vertical Angle, by storing in digital form to the IR
dome, when needs to call these parameters, adjust the IR dome to preset a set state.
Operator can control it convenient and efficient through controlling keyboard and other
devices to set/call preset position. This IR dome camera supports 255 presets.
（1）Set preset position
Make the IR dome moved to the corresponding position by controlling keyboard, DVR
and other control equipments，You can refer to the Preset function of controlling
keyboard or DVR to process preset settings after using the zoom buttons of the
controlling keyboard, DVR etc controlling devices to adjust Multiples of the lens to right
angle, and enter the corresponding number of preset position
Example：Using a type of controlling keyboard to set No.1 preset position
a、Press the key “set preset”，then the camera is moved to the need position by joystick.
Make the lens step to the angle in demand by pressing the key “zoom”
b、 Enter “1”
c 、Press the key “enter”
（2）Call preset
Refer to the calling preset function of controlling keyboard or DVR to process preset
calling, and according to the required preset position number to call.

www.ctronicssecuritycameras.com
9
Example：using a type of controlling keyboard to call No.1 preset position.
a、Press the key“ call preset position”， then enter “1”
b、Click‘Enter’
2、
Calling of automatically cruise routes/clear
Auto tour is by operation to set the cruise routes arbitrarily ,an external command
can let the dome camera according to the specified route to make a tour
automatically，and staying in the corresponding preset position。there are 8 auto
cruise routes for the IR dome camera，Each tour lines can store up to 5 presets at
least and 30 presets at most .
（1）Calling auto tour line
By controlling keyboard and DVR to implement the command “call No.98”preset
position. It can make the dome camera auto tour the preset position of it has been set
in the first cruise route “call No.97 preset position” as auto tour the preset position of
the second tour line. Corresponding number of preset position for 3cruise routes, please
reference table 5.
Table 5：cruise and preset relation table
Patrol line Calling preset Contains preset
the first cruise call No.98 preset 1
～ 5 preset
the second cruise call No.97 preset 6
～ 15 preset
The third cruise call No.96 preset 16
～ 35 preset
Note. : The default preset position number corresponding to each patrol
as shown in the table, but the you can be added to each of 30 presets .
Example：Use a type of controlling keyboard to start using the second auto tour line.
a、Press the key “call preset position”, then enter “97”
b、press the key “Enter”
（2）Stay time setting for preset position when auto tour

www.ctronicssecuritycameras.com
10
Can set stay time for preset position as 5 to 60 Seconds when the IR dome camera
auto tour 。operation method by controlling keyboard, DVR to implement the
command “call No.123 preset position”，the stay time add 5 sec；“call No.124 preset
position”，the stay time minus 5 sec；Stay time setting command for auto tour
reference table 6.
Table 6： preset stay time and preset relation table
stay time operation
default 10 sec
Call No.106 clear all Settings to restore the default
Add 5 sec Call No.123 preset
Minus 5 sec Call No.124 preset
Example: using a type of controlling keyboard to set the stay time be 8 sec
a、Press the key “call preset position”, then enter “123”
b、Press “ enter”
Remark ：If the preset position come to off normal after long time of auto tour
or outside force, restart the the dome to recover normal state
（3）Clear cruise routes
Call No.106 clear all Settings to restore the default
3、Limit scanning on left and right、355°Horizontal scanning、pattern scan.
By the controlling keyboard or DVR related command execution,you can setting or
calling Limit scanning、355°Horizontal scanning、pattern scan.
（1）Limit scanning on left and right setting
By controlling keyboard or DVR to implement the command “set No.83 preset
position” after moved the dome to the right for the required position ，Implementing
the command “set No.84 preset position” after make the dome rotating to the left
to the position of left limit position, left and right limit position is setting done.
Now, the dome just running between these two points only.
Tip: left and right limit setting and invoke the command relationship between
scanning the corresponding table 7.
Example: use a type of controlling keyboard to set limit position on left and right

www.ctronicssecuritycameras.com
11
a、 Press the key “set preset”, Then make the camera moved to the need position
by shaking joystick.
b、 Enter “83”
c、 Press the key “enter”
d、Make the dome rotating to the left position of left limit position
e、Enter “84”
f、Press the key “ enter”
（2）Calling Limit scanning
By controlling keyboard or DVR to implement the command “call No.91 preset
position” dome will perform start limit scanning. The other limit scanning set or call
is shown in Table 7.
Table 7：Limit scanning and preset relation table
Limit scanning setting calling
the first scan
Left limit：set No.83 preset
Right limit：set No.84 preset Call No.91 preset
the second scan
Left limit：set No.85preset
Right limit：set No.86preset Call No.92 preset
the third scan
Left limit：set No.87 preset
Right limit：set No.88 preset Call No.93 preset
（3）355°Horizontal scanning
By controlling keyboard or DVR to implement the command “call No.99 preset
position” dome will perform start 355°Horizontal scanning.
（4）pattern scan
This product has 4 groups of pattern scan.Pattern Scan refers to the scanning
motion ball machine between two points by irregular trajectory has been set to
perform reciprocating scanning.
About pattern scan corresponding setting and calling show in the table 8.
Example：Use a type of control keyboard for the first group pattern scan settings
or calling.

www.ctronicssecuritycameras.com
12
a、Set the start point: Shake the control rocker take the ball to the target location ,
then call No.113 preset position to start recording scanning track.
b、Shake the control rocker take the ball machine level or vertical rotation after
scanning the target moves to the next target position
c、Set the end point: When the ball machine to move to the end point of the target
location, then call No.114 preset position to end of recording scanning track.
Now the pattern scan is complete
d、call No.108 preset position will start the first pattern scan.
Table 8：pattern scan and preset relation table
pattern scan
Set command Call command
first
The start point：call No.113 preset
The end point：call No.114 preset
call No.108 preset
second
The start point：call No.115 preset
The end point：call No.116preset call No.109 preset
third
The start point：call No.117 preset
The end point：call No.118 preset
call No.110 preset
fourth
The start point：call No.121 preset
The end point：call No.122 preset
call No.111 preset
（4）Limit scanning、355°Horizontal scanning、pattern scan clear
Call No.106 clear all Settings to restore the default。
4、Restore factory settings
Call No.106 clear all Settings to restore factory.

www.ctronicssecuritycameras.com
13
Main Functions Fast Call Up
Fast Call Up
FUNCTION Fast Call Up
FUNCTION
Call 81 Auto IR Call 95 Open OSD Menu
Call 82 Turn on IR Call 99 355°Horizontal
scanning
Call 83 Turn off IR Call 105 RATIO SPEED :
ON and OFF
Call 106 clear all Settings to
restore the default Call 107 Horizontal start position fix
Set 125 Set Home position Call 125 Clear Home position
Call 126
increase 1 minute for
Home position
( Max 10 minutes )
Call 127
decrease 1 minute for
Home position
( Min. 1 minute )
RUN tour
Fast Call Up
FUNCTION
Call 96 Run tour 3 ( 16 ～ 30 preset )
Call 97 Run tour 2 ( 6 ～ 15 preset )

www.ctronicssecuritycameras.com
14
Call 98 Run tour 1 ( 1 ～ 5 preset )
RUN A-B scan
Fast Call Up FUNCTION Fast Call Up FUNCTION
Call 91 A-B scan 1
Set 83 Left limit 1
Set 84 Right limit 1
Call 92 A-B scan 2
Set 85 Left limit 2
Set 86 Right limit 2
Call 93 A-B scan 3
Set 87 Left limit 3
Set 88 Right limit 3
RUN pattern scan
Fast Call
Up
FUNCTION
Fast Call
Up
FUNCTION
Call 108 Run pattern scan 1
Call 113 start recording scanning track 1
Call 114 end of recording scanning track 1
Call 109 Run pattern scan 2
Call 115 start recording scanning track 2
Call 116 end of recording scanning track 2

www.ctronicssecuritycameras.com
15
Call 110 Run pattern scan 3
Call 117 start recording scanning track 3
Call 118 end of recording scanning track 3
Call 111 Run pattern scan 4
Call 121 start recording scanning track 4
Call 122 end of recording scanning track 4
Former control status
Fast Call Up
FUNCTION
Call 130 Release PTZ camera
movement lock
Before calling cruise, limiting the
scan, 355 degree panorama, call 131
preset point could lock PTZ camera
movement. After lock PTZ camera
movement, PTZ camera will back to
the former controlled status when user
stop control PTZ camera. Call 130
preset point could release the lock.
Call 131 Lock PTZ camera
movement
Call 132 Increase the time of
recovering control
Under PTZ camera movement, it
allows user to make some
non-functionality operation. After user
finish operation, PTZ camera will
recover to the former controlled

www.ctronicssecuritycameras.com
16
Call 133 Decrease the time of
recovering control
status. The default recover time is 5
minutes. User can increase the time
by calling 132 preset point. Each
calling operation increase 1 minute.
Calling 133 preset point to decrease
the recover time. Each calling
operation decrease 1 minute. Max 10
minutes, and minimum 1 minute.
SPECIAL FUNCTION
Fast Call Up FUNCTION
Call 103 Open
Camera Menu
ZOOM+ ： UP
ZOOM- ： DOWN
FOUCS Near ： Left
FOUCS Far ： Right
Iris ： Enter

www.ctronicssecuritycameras.com
17
Fast Call Up FUNCTION Fast Call Up FUNCTION
SET 254 PRESET，
Call 1 ZOOM OSD ON SET 254 PRESET， Call 17 HLC OFF
SET 254 PRESET，
Call 2 ZOOM OSD OFF SET 254 PRESET , Call 18 HLC level 1
SET 254 PRESET，
Call 3 Through fog OFF SET 254 PRESET , Call 19 HLC level 2
SET 254 PRESET，
Call 4 Through fog level 1 SET 254 PRESET , Call 20 HLC level 3
SET 254 PRESET，
Call 5 Through fog level 2 SET 254 PRESET , Call 21 IN DOOR
SET 254 PRESET，
Call 6 Through fog level 3 SET 254 PRESET , Call 22 OUT DOOR
More special
preset
function form
RUN tour
Fast Call Up
FUNCTION
Call 181 Run tour 1 ( 1 ～ 5 preset )
Call 182 Run tour 2 ( 6 ～ 15 preset )
Call 183 Run tour 3 ( 16 ～ 30 preset )

www.ctronicssecuritycameras.com
18
Call 184 Run tour 4 ( 31 ～ 50 preset )
Call 185 Run tour 5 ( 1 ～ 30 preset )
Call 186 Run tour 6 ( 1 ～ 40 preset )
Call 187 Run tour 7( 1 ～ 60 preset )
Call 188 Run tour 8 ( 1 ～ 80 preset )
RUN A-B scan
Fast Call Up FUNCTION Fast Call Up FUNCTION
Call 141 A-B scan 1
Set 81 Left limit 1
Set 82 Right limit 1
Call 142 A-B scan 2
Set 83 Left limit 2
Set 84 Right limit 2

www.ctronicssecuritycameras.com
19
Call 143 A-B scan 3
Set 85 Left limit 3
Set 86 Right limit 3
Call 144 A-B scan 4
Set 87 Left limit 4
Set 88 Right limit 4
Call 145 A-B scan 5
Set 89 Left limit 5
Set 90 Right limit 5
Call 146 A-B scan 6
Set 91 Left limit 6
Set 92 Right limit 6
Call 147 A-B scan 7
Set 93 Left limit 7
Set 94 Right limit 7
Call 148 A-B scan 8
Set 95 Left limit 8
Set 96 Right limit 8
RUN pattern scan
Fast Call
Up
FUNCTION
Fast Call
Up
FUNCTION

www.ctronicssecuritycameras.com
20
Call 151 Run pattern scan 1
Call 159 start recording scanning track 1
Call 160 end of recording scanning track 1
Call 152 Run pattern scan 2
Call 161 start recording scanning track 2
Call 162 end of recording scanning track 2
Call 153 Run pattern scan 3
Call 163 start recording scanning track 3
Call 164 end of recording scanning track 3
Call 154 Run pattern scan 4
Call 165 start recording scanning track 4
Call 166 end of recording scanning track 4
Call 155 Run pattern scan 5
Call 167 start recording scanning track 5
Call 168 end of recording scanning track 5
Call 156 Run pattern scan 6
Call 169 start recording scanning track 6
Call 170 end of recording scanning track 6
Call 157 Run pattern scan 7
Call 171 start recording scanning track 7
Call 172 end of recording scanning track 7
Call 158 Run pattern scan 8
Call 173 start recording scanning track 8
Call 174 end of recording scanning track 8
Ⅶ、Notice