Ctronics CT-S20-4G Administrator Guide

-www.ctronics.com-

3G/4G Solar Battery PTZ Camera
CT-S20-4G Operation Instruction Manual
(EN/DE/FR/IT/ES)
-www.ctronics.com-
SCSMS-20210323

Contents
English (01 11)
(12 22)
(23 33)
(34 44)
(45 56)
Deutsche
Française
Italiana
Española
----------------------- ~
----------------------- ~
----------------------- ~
----------------------- ~
----------------------- ~

-www.ctronics.com-
---------------------- ---- ---------- -----------------------
-------------------------------------------------
------- --- -----------------------------
Table of Contents
1. Product details
2. Download the mobile phone APP
3. About SIM card and SD card
4. Add your camera to app
5. Functions interface
7. Alarm and Video
8. Video playback and download
02
-01-
02
03
--------------------------
6. Low power consumption setting and recording 06
---------------------- --------------------------03
-------------- -------- ------- --------------------------05
---------------- --------------------------08
9. FAQ -------------- --------- --- ----------- - ------- --------------------------10
------------------------------ - --------------------------07
Power ON
1.3 Quick Setup
1.3.1 Insert the USB cable of solar panel to the “USB” Silicon Flap o
the bracket base for batterty charging.
1.3.2 Press the Power switch to turn ON/OFF the camera,
1.3.3 Wait the voice prompt step by step for pairing the camera with t
1.4 Note:
Quick installati
Infrared &
White LED

-www.ctronics.com-
-02-
①For iOS system, please download the mobile phone application "CTRONICS" in
the App Store.For Android system,please download the mobile phone application
"CTRONICS" in Google Play store.
②During the camera connection , it will prompt on the App that "Whether to allow
the APP to pass the application authority of the mobile phone?". Please select "Yes" to
ensure all functions of the APP can be normally operated.
Download the mobile phone APP
2
Product details
1
Integrated installation
Separated installation
S20 Accessory kit is not included,
contact us if you want.
1*Bracket 1*Power
extension cable
Recommended
installing the camera
about 2.6M
1* USB charging cable
ON/OFF
p on
a with the APP.
ation metal base
3. APP INSTALLATION
3.1. Scan the following QR codes or seach for〝UBox〞from the App
Store(for iOS devices) or Google Play Store (for Android smartphones)
to download and install the app.
Power ON/OFF
Infrared &
White LED
Photosensitivity
Reset button
Quick installation
metal base
Reset button

About SIM card and SD card
3
-www.ctronics.com-
-03-
① Activate the SIM card and put it into the card slot as shown in the picture (if the
SIM card is not activated, please activate the SIM card first)
② Insert SD card into the camera for recording. This camera supports a maximum of
128G SD card
Before using the camera, please install SIM card and SD card
Add your camera to app
4
Turn on the camera, open the CTRONICS APP on the phone, scan the QR code of the
camera body to add the camera according to the following figure

-www.ctronics.com-
-04-

-www.ctronics.com-
-05-
Functions interface
1.Battery Display the current quantity of electric
charge and charging status
You can adjust the up and down flip and left and
right mirroring of the camera image.
You can freely choose black and white night vision or
color night vision. It is recommended to select the
default automatic mode. In the night automatic mode,
when the camera is not triggered, the camera dormant
light turns off, and the camera triggers light to turn on
automatically
You can close the preview image.
Press and hold this icon to talk during intercom voice
Turn on the voice monitor, the mobile phone needs to
turn off the mute function and adjust the sound to the
maximum
By pressing it, you can capture the current picture and
save it in the APP local picture.
Press video recording to record the current screen and
save it to the APP local recording.
You can easily switch the clarity of the preview images
to HD and SD.
2.Flip & Mirror Image
3.Night vision mode
selection
4.Close the preview
5. Intercom
6.Voice Monitor
7.Manual Capture
8.Manual Video
9.HD and SD
5
1*Position paper

-www.ctronics.com-
-06-
Low power consumption setting and recording
6
It is recommended to select the default low-power video recording. In this mode, the
camera will only record when the alarm is triggered. When it is not triggered, the camera
will remain dormant, which saves power. In the always working mode, the camera
consumes more power and is not recommended.

-www.ctronics.com-
-07-
Picture 22 Picture 23
Alarm and Video
7
① Action with Alarm.If your mobile phone cannot receive an alarm push, please
check whether the alarm notification permission is turned on in the CTRONICS
application. The Android system usually automatically exits the APP after the phone is
locked. Please set to allow the CTRONICS application to run in the background in
“system settings”.( Picture 22)
② Push Name :You can customize the name of the camera by modifying the Push
Name.(Picture 23)
③ In order to reduce the false alarm of PIR caused by slow-moving cars or
environmental factors, we recommend you turn on the PIR alarm and the humanoid
alarm at the same time.(Picture 23)
④ Open the alarm recording to the SD card, you can select the length of the
recording time after a single trigger of 10 seconds or 30 seconds. If you need to upload
the alarm video to your own FTP server, you need to insert an SD card.

-www.ctronics.com-
-08-
Picture 24 Picture 25
Video playback and download
8

-www.ctronics.com-
-09-
①: "Online" means SD card video recording.(Picture 24)
②: Local means manual video recording in the local video .(Picture 24)
③: The alarm log.(Picture 24)
④: Entering the video list.(Picture 24)
⑤: Playing video.(Picture 25)
⑥: Downloading video to mobile phone.(Picture 25)
⑦: Filtering videos according to time.(Picture 26)
Picture 26
1.4.2.Make sure your phone is connecting to the 2.4Ghz wifi firstly b
pairing the camera.

-www.ctronics.com-
-10-
The camera has not been charged for a long time and the battery is low. Please use a
5V charger to charge the camera. The 5V/2A charger can charge at least 8 hours, and
the 5V/1A charger can charge at least 16 hours. If the camera is fully charged, the
charging indicator will change from red to green.
Please confirm whether the SIM card has been activated and the flow of the SIM card is
sufficient, and then check whether the position of the SIM card is loose, turn it off and
reinsert it and turn it on again.
① Why does the camera automatically shut down after the red light flashes
several times after pressing the power button?
② Why the camera fails to connect to the Internet?
For the location of the camera, we recommend avoiding a large number of moving cars,
chimneys, and direct sunlight. Such environments will cause false alarms and
interference with PIR detection. In addition, the humanoid alarm can be turned on at the
same time in the alarm settings to reduce false alarms, reduce camera wake-up time,
and save power.
③ Why does the mobile phone continue to receive false alarms? And the
camera consumes a lot of power?
We recommend that you check whether the camera's SD card is installed correctly.
After inserting the card, please format the card in the phone APP settings. If the reading
is still abnormal, please take the card and format it as FAT32 on the computer, or
replace the card for the test. In addition.Please set the device time zone and the phone
time zone to be consistent in the settings.
④ Why can't I see the video on my mobile phone?
Please set the device time zone and the phone time zone to be consistent in the
settings. If the daylight saving time starts in the local time, please check the daylight
saving time in the time zone setting.
⑤ Why the camera's recording time is not the same as the local tim
Yes, please contact us to buy the CT-S20 accessory kit, which contains the solar panel
bracket and the charging extension cable. The solar panel and the camera can be
installed separately.
⑥ The place where my camera is installed is not well-lit, can I install the
solar panel in another location?
Please turn on the PIR detection in the APP alarm setting, and adjust the sensitivity to
the highest. Tear off the protective film on the face lens of the camera to ensure the
normal use of PIR
⑦ Why is the camera's detection range so short, sometimes it can't be detected?
FAQ
9
ly before you

-www.ctronics.com-
-11-
Yes, you can set the alarm recording time to 30 seconds in the alarm settings, please
refer to the fifth part of the manual.
⑧ My alarm recording is only 15 seconds, can I set the time longer?
The video files in the camera's SD card will be automatically overwritten after recording.
For the safety of video files, single file deletion is not supported. If you need to delete
all, you can format the SD card in the APP.
⑨ How do I delete the video files in the SD card?
The password cannot be recovered. If you forget the password,please press the power
button for one minute and press and hold the reset button for 10-15 seconds, then
release the reset button, the camera will be restored to the factory default. And the
password will be restored to the default "admin". At this time, please re-add the camera
network to the mobile APP.
⑩ How can I recover the password of the camera if I forget it?

3G/4G Solar Akku PTZ Kamera
Bedienungsanleitung der CT-S20-4G
(DE)
-www.ctronics.com-

-www.ctronics.com-
-12-
----------------------- ------------------- ------------------
--------------------------------------------
------------------------------
Inhaltsverzeichnis
1. Produktdetails
2. Laden Sie die Mobiltelefon APP herunter
3. Über die SIM-Karte und SD-Karte
4. Fügen Sie Ihre Kamera zur App hinzu
5. Schnittstelle der Funktionen
7. Alarm und Video
8. Videowiedergabe und Herunterladen
13
13
14
--------------------------------------14
6. Einstellung für geringen Stromverbrauch und Aufnahme --------------17
------------------- --------------------------16
----------------------------------19
9. FAQ -------------- --------- --- ----------- - ------- --------------------------21
------------------------------- --------------------------18

① Laden Sie für iOS-Systeme bitte die Mobiltelefonanwendung "CTRONICS" im App
Store herunter. Für das Android-System laden Sie bitte die App "CTRONICS" für
Handys im Google Play Store herunter.
②Während der Kameraverbindung, wird die App Sie dazu auffordern: "Soll der APP
erlaubt werden, die App-Berechtigung des Mobiltelefons zu übergeben? Bitte wählen
Sie "Ja", um sicherzustellen, dass alle Funktionen der APP normal betrieben werden
können.
Laden Sie die Mobiltelefon APP herunter
2
Produktdetails
1
-www.ctronics.com-
-13-
1*Halterung 1*Stromverläng
erungskabel
Integrierte installation
Recommended
installing the camera
about 2.6M
1* USB charging cable
PP.
ain
e you
al base
3. APP INSTALLATION
3.1. Scan the following QR codes or seach for〝UBox〞from the App
Store(for iOS devices) or Google Play Store (for Android smartphones)
to download and install the app.
Das S20-Zubehörset ist nicht im Lieferumfang enthalten.
Kontaktieren Sie uns, wenn Sie möchten.
Getrennte installation
Schnelle installation
metallbasis
Einschalten / Ausschalten
USB-Ladeanschluss
Solarkabel
Sonnenkollektor
Antenne
Innensechskant
schraube
Universalhalterung
Schraube
Infrarot &
weiße LED
Linse
Mikrofon
Lichtempfindlichkeit
PIR
Schnittstell
enabdeckung
TF-Karte
SIM-Karte
Reset-Knopf
TF-Karte
SIM-Karte
Reset-Knopf

-www.ctronics.com-
-14-
TF-Karte
SIM-Karte
Reset-Knopf
Über die SIM-Karte und SD-Karte
3
① Aktivieren Sie die SIM-Karte und stecken Sie sie in den Kartenschlitz, wie in der
Abbildung gezeigt (wenn die SIM-Karte nicht aktiviert ist, aktivieren Sie bitte zuerst die
SIM-Karte)
② Stecken Sie die SD-Karte zur Aufnahme in die Kamera ein. Diese Kamera unterstützt
maximal eine 128GB SD-Karte
Bevor Sie Ihre Kamera benutzen, schieben Sie bitte die SIM-Karte und SD-Karte ein
Fügen Sie Ihre Kamera zur App hinzu
4
Schalten Sie die Kamera ein, öffnen Sie die CTRONICS APP auf Ihrem Handy, scannen
Sie den QR-Code des Kameragehäuses, um die Kamera entsprechend der folgenden
Abbildung hinzuzufügen

-www.ctronics.com-
-15-