Ctronics CT-S20 Administrator Guide

-www.ctronics-tech.com-

Solar Battery PTZ Camera
CT-S20 Operation Instruction Manual
(EN/DE/FR/IT/ES)
-www.ctronics-tech.com-

Contents
English (01 13)
(14 25)
(26 37)
(38 49)
(50 61)
Deutsche
Française
Italiana
Española
----------------------- ~
----------------------- ~
----------------------- ~
----------------------- ~
----------------------- ~

-www.ctronics-tech.com-
---------------------- ---- ---------- -----------------------
----------------------------------
----------------------------
--------------------------
------- --- -----------------------------
Table of Contents
1. Product details
2. Download the mobile phone APP
3. Connect the camera to Wi-Fi network
4. Password modification
5. Functions interface
6. Alarm and Video
7. Video playback and download
02
-01-
02
03
05
03
-------------- ----------- --------------------------08
-------------- -------- ------- --------------------------09
---------------- --------------------------11
8. FAQ -------------- --------- --- ----------- - ------- --------------------------11
------------------------------ - --------------------------10
3.1 Method 1:Configure network via sound
3.2 Method 2:Configure network via hotspot

-www.ctronics-tech.com-
-02-
①For iOS system, please download the mobile phone application "CTRONICS" in
the App Store.For Android system,please download the mobile phone application
"CTRONICS" in Googel Play store.
②During the camera connection , it will prompt on the App that "Whether to allow
the APP to pass the application authority of the mobile phone?". Please select "Yes" to
ensure all functions of the APP can be normally operated.
Download the mobile phone APP
2
Product details
1
Power ON/OFF
Infrared &
White LED
Photosensitivity
Reset button
Quick installation
metal base

Picture 1 Picture 2
① The camera may have low battery power during long-term transportation,so
please use a 5V mobile phone charger or computer USB port to charge the camera
before use (the charging port lights up red when charging, and lights up green when
fully charged. Please also insert an SD card into the camera for video recordings.
② Please place your mobile phone and camera next to the router for operation.
Please press the camera's power button, the light board indicator will flash red light.The
camera will constantly sound a chime when network configuration, waiting for the
camera to configure the network.
③Please note the camera only works with 2.4G Wi-Fi. It does not support 5G
Wi-Fi.(Picture 1 and Picture 2)
3.1 Method 1:Configure network via sound
Connect the camera to Wi-Fi network
3
-www.ctronics-tech.com-
-03-

-www.ctronics-tech.com-
-04-
Picture 3 Picture 4 Picture 5
④ Open the CTRONICS APP and add the camera according to the following
pictures(Picture 3 to Picture 8)
Note: When entering the WiFi password, please ensure that it is case sensitive. After
the password is entered correctly, please click on the mobile phone application to enter
the distribution network. At the same time, the mobile phone will emit a sound
signal,please adjust the phone volume to the maximum and also keep the distance
between the phone and the camera within 10 cm. Then please wait for the network
configuration to complete.
Picture 6 Picture 7 Picture 8

Picture 9 Picture 10
① Press the power button. The indicator light on the light board will flash red, and the
camera will constantly sound a chime for network configuration.
② Please place your mobile phone and camera next to the router for operation. Open
the WiFi setting interface of the mobile phone, find the hotspot with the name
IPCAM-XXXXXX sent by the camera, click connect, and the password is 01234567.
This WiFi is the camera hotspot. After the phone is connected, it will prompt "The
current WiFi has no Internet connection", please choose to continue using(Picture 9 to
Picture 10)
③ Open the CTRONICS APP, adding the camera according to the following pictures,
and the camera status in the list will display Online after the addition is successful.(Pic-
ture 11 to Picture 13)
3.2 Method 2:Configure network via hotspot
-www.ctronics-tech.com-
-05-

-www.ctronics-tech.com-
-06-
④ Enter the camera settings menu and find WiFi settings, then click WiFi
management.The camera will automatically search for nearby WiFi, pls click the WiFi to
be connected, then enter the password (note that the password is case sensitive).Click
Save, and wait one minute after the WiFi setting is successful, the camera status in the
list will be updated to Online.(Picture 14 to Picture 18)
Picture 11 Picture 12 Picture 13
Picture 14 Picture 15 Picture 16

Note: If the network configuration is not successful, please operate as the
following steps to try again:
1.After turning on the camera for one minute, please press and hold the camera reset
button for 10 seconds, then release the camera reset button and reconfigure network
again.
2. The home WiFi password cannot exceed 31 characters. The password should be
case sensitive and avoid using special characters such as "?,!, &,".We recommend you
use a combination of numbers and letters.
3. If you still cannot complete the network configuration of the camera or have any
questions , please contact our email: [email protected]. We will reply you
within 24 hours)
Picture 17 Picture 18
-www.ctronics-tech.com-
-07-

For your privacy,we suggest you modify the camera password in the settings menu. The
old password is "admin". After entering the new password, please click "Apply", and the
camera will restart to complete the new password.(Picture 19 to Picture 21)
Password modification
4
-www.ctronics-tech.com-
-08-
Picture 19 Picture 20 Picture 21

Functions interface
1.Battery Display the current quantity of electric
charge and charging status
You can adjust the up and down flip and left and
right mirroring of the camera image.
You can choose black and white night vision or
color night vision freely.
You can close the preview image.
Press and hold this icon to talk during intercom
voice
Turn on the voice monitor, the mobile phone
needs to turn off the mute function and adjust the
sound to the maximum
By pressing it, you can capture the current
picture and save it in the APP local picture.
Press video recording to record the current
screen and save it to the APP local recording.
You can easily switch the clarity of the preview
images to HD and SD.
2.Flip & Mirror Image
3.Light Mode
4.Close the preview
5. Intercom
6.Voice Monitor
7.Manual Capture
8.Manual Video
9.HD and SD
5
-www.ctronics-tech.com-
-09-

Picture 22 Picture 23
Alarm and Video
6
-www.ctronics-tech.com-
-10-
① Action with Alarm.If your mobile phone cannot receive an alarm push, please
check whether the alarm notification permission is turned on in the CTRONICS
application. The Android system usually automatically exits the APP after the phone is
locked. Please set to allow the CTRONICS application to run in the background in
“system settings”.( Picture 22)
② Push Name :You can customize the name of the camera by modifying the Push
Name.(Picture 23)
③ In order to reduce the false alarm of PIR caused by slow-moving cars or
environmental factors, we recommend you turn on the PIR alarm and the humanoid
alarm at the same time.(Picture 23)
④ Open the alarm recording to the SD card, you can select the length of the
recording time after a single trigger of 10 seconds or 30 seconds. If you need to upload
the alarm video to your own FTP server, you need to insert an SD card.

-www.ctronics-tech.com-
-11-
The camera has not been charged for a long time and the battery is low. Please use a
5V charger to charge the camera. The 5V/2A charger can charge at least 8 hours, and
the 5V/1A charger can charge at least 16 hours. If the camera is fully charged, the
charging indicator will change from red to green.
①: "Online" means SD card video recording.(Picture 24)
②: Local means manual video recording in the local video .(Picture 24)
③: The alarm log.(Picture 24)
④: Entering the video list.(Picture 24)
⑤: Playing video.(Picture 25)
⑥: Downloading video to mobile phone.(Picture 25)
⑦: Filtering videos according to time.(Picture 26)
Picture 24 Picture 25 Picture 26
① Why does the camera automatically shut down after the red light flashes
several times after pressing the power button?
Video playback and download
7
FAQ
8

The camera and mobile phone must be placed next to the router when configuring the
network first. In addition, the volume of the mobile phone needs to be adjusted to the
maximum during voice distribution. Please pay attention to the case of the password
when entering the password and avoid using special characters, such as "?,!, &,". We
recommend that you use a combination of numbers and letters. If the WiFi password is
entered incorrectly, please reset the camera and reconnect to the network.
② Why did the camera fail to match the network?
Yes, you can set the alarm recording time to 30 seconds in the alarm settings, please
refer to the fifth part of the manual.
⑧ My alarm recording is only 15 seconds, can I set the time longer?
-www.ctronics-tech.com-
-12-
For the location of the camera, we recommend avoiding a large number of moving cars,
chimneys, and direct sunlight. Such environments will cause false alarms and
interference with PIR detection. In addition, the humanoid alarm can be turned on at the
same time in the alarm settings to reduce false alarms, reduce camera wake-up time,
and save power.
③ Why does the mobile phone continue to receive false alarms? And the
camera consumes a lot of power?
We recommend that you check whether the camera's SD card is installed correctly.
After inserting the card, please format the card in the phone APP settings. If the reading
is still abnormal, please take the card and format it as FAT32 on the computer, or
replace the card for the test. In addition.Please set the device time zone and the phone
time zone to be consistent in the settings.
④ Why can't I see the video on my mobile phone?
Please set the device time zone and the phone time zone to be consistent in the
settings. If the daylight saving time starts in the local time, please check the daylight
saving time in the time zone setting.
⑤ Why the camera's recording time is not the same as the local tim
Yes, please contact us to buy the CT-S20 accessory kit, which contains the solar panel
bracket and the charging extension cable. The solar panel and the camera can be
installed separately.
⑥ The place where my camera is installed is not well-lit, can I install the
solar panel in another location?
The WiFi signal strength of the camera receiving the router is affected by the installation
environment. Therefore, it should be as close as possible to the router and reduce the
ensure that the upload rate of the WiFi network speed must reach at least 1.5M/S to
achieve stable data transmission.
⑦ Mobile APP often cannot connect to the camera, sometimes the picture freezes,
and it takes a long time to see the picture after buffering?

-www.ctronics-tech.com-
-13-
The video files in the camera's SD card will be automatically overwritten after recording.
For the safety of video files, single file deletion is not supported. If you need to delete
all, you can format the SD card in the APP.
⑨ How do I delete the video files in the SD card?
The password cannot be recovered. If you forget the password,please press the power
button for one minute and press and hold the reset button for 10-15 seconds, then
release the reset button, the camera will be restored to the factory default. And the
password will be restored to the default "admin". At this time, please re-add the camera
network to the mobile APP.
⑩ How can I recover the password of the camera if I forget it?

Solar Akku PTZ Kamera
CT-S20 Betriebsanleitung
(EN/DE/FR/IT/ES)
-www.ctronics-tech.com-

-www.ctronics-tech.com-
----------------------- ------------------- ------------------
---------------
------------------------------
Inhaltsverzeichnis
1. Produktdetails
2. Laden Sie die Mobiltelefon APP herunter
3. Verbinden Sie die Kamera mit einem WLAN-Netzwerk
4. Änderung des Passworts
5. Schnittstelle der Funktionen
6. Alarm und Video
7. Videowiedergabe und Herunterladen
15
-14-
15
16
---------------------- --------------------------20
------------------- --------------------------21
----------------------------------23
8. FAQ -------------- --------- --- ----------- - ------- --------------------------23
------------------------------- --------------------------22
-- -----
----------------
16
17
3.1 Methode 1: Konfigurieren Sie das Netzwerk über ertönen
3.2 Methode 2: Netzwerk über Hotspot konfigurieren

-www.ctronics-tech.com-
-15-
① Laden Sie für iOS-Systeme bitte die Mobiltelefonanwendung "CTRONICS" im App
Store herunter. Für das Android-System laden Sie bitte die App "CTRONICS" für
Handys im Google Play Store herunter.
②Während der Kameraverbindung, wird die App Sie dazu auffordern: "Soll der APP
erlaubt werden, die App-Berechtigung des Mobiltelefons zu übergeben? Bitte wählen
Sie "Ja", um sicherzustellen, dass alle Funktionen der APP normal betrieben werden
können.
Laden Sie die Mobiltelefon APP herunter
2
Produktdetails
1
Schnelle installation
metallbasis
Einschalten / Ausschalten
USB-Ladeanschluss
Solarkabel
Sonnenkollektor
Antenne
Innensechskant
schraube
Universalhalterung
Schraube
Infrarot &
weiße LED
Linse
Mikrofon
Lichtempfindlichkeit
PIR
Schnittstell
enabdeckung
TF-Karte
Reset-Knopf