Cuanbo MVP-8C User manual

MVP-8C(N)/MVP-16C/
MVP-32C
User manual

Contents
1、Operation guide ..........................................................................................................................3
1.1 Power source.......................................................................................................................3
1.2 Capacitive touch screen ......................................................................................................3
1.3 Signal switching...................................................................................................................4
1.4 EDID management ..............................................................................................................6
1.5 Internet network communication Settings .........................................................................8
1.6 RS232 setting.......................................................................................................................9
1.7 Version information query ..................................................................................................9
1.8 system reset....................................................................................................................10
2、RS232 and LAN control command.............................................................................................10
3、Web management.....................................................................................................................19
3.1 WEB management option .................................................................................................20
3.2 EDID options......................................................................................................................22
3.3 UART option ......................................................................................................................23
3.4 System option....................................................................................................................24
4、product technical parameter ....................................................................................................25
4.1 Matrix technical parameter...............................................................................................25
4.2 Cards technical parameter ................................................................................................27
5、card description ........................................................................................................................28
5.1 HDBaseT card ....................................................................................................................28
5.2 HDMI cards........................................................................................................................30
5.3 DVI card .............................................................................................................................32
5.4 Optic card ..........................................................................................................................34
5.5 SDI card .............................................................................................................................36
5.6 CVBS card ..........................................................................................................................37
5.7 YPBPR card ........................................................................................................................39
5.8 VGA card............................................................................................................................41
6、System diagram.........................................................................................................................43

1、Operation guide
1.1 Power source
MVP-8C(N)/MVP-16C/MVP-32C signal management platform using 100-250v ac volt
age power supply. Power on when push the button < ▍>, Power off when push th
e button <○>.
1.2 Capacitive touch screen
MVP-8C(N)/MVP-16C/MVP-32C signal management platform uses a 5” capacitive to
uch screen, which have a resolution of 800x480, the layout of system is shown in
figure.
Each particular function button as shown in form
button
function

Video switch select
Audio switch select
EDIE management
System Settings
All switch to select
Close the output channel selection
Save selection key scene
Call select key scenes
Output channel
Input channel
Audio and video synchronization switching
Main interface
1.3 Signal switching
MVP-8C(N) signal management platform use hot plug input/output card slots; Slots
7 ~ 8 are fixed to output, slots 1 ~ 6 are configurable for input or output.

MVP-16C signal management platform use hot plug input/output card slots; Slots 1
3 ~ 16 are fixed to output, slots 1 ~ 12 are configurable for input or output.
MVP-32C signal management platform use hot plug input/output card slots; Slots 2
5 ~ 32 are fixed to output, slots 1 ~ 24 are configurable for input or output.
(1) Switch a input to all output channel
Simply choose the Video input and touch the screen interface: touch <Input channe
l number> + <TO All> button, input channel number will be displayed in the top lef
t corner angle of the output channel.
for example , <IN6> + <TO All> key，Switch successful, at the upper left of the ou
tput channel Angle IN4 will be shown.
(2) Switch any one input to any or all output channels
Select a input and switch to any output channel. For example , IN4 + OUT7 + OU
T9 + OUT15 + OUT16. Switch successful, IN4 will be shown at the upper left of t
he output channel angle.
(2) Close the output channel
MVP-8C(N)/MVP-16C/MVP-32C signal management platform provides a function of
closing a channel output or multiplex channels output, output channel which was cl
osed will have no signal output. If users need to close an output channel, just clic
k the close button on touch screen, choose the corresponding channel. When close
channel successfully, the output interface on touch screen will become gray, the u
pper left corner input channel number is 00. Such as the figure below.
(3) Check the output channel state
MVP-8C(N)/MVP-16C/MVP-32C signal management platform provides a function of
checking all channels status. Can be View the output channel video switching status,
Audio switching status, EDID input channel switching status and output channel
identification EDID status, display equipment in Video interface and so on.
For example, audio switching state.

(4) Scene save and call
Save the current status of input and output channels are also called save the current
scene, MVP-8C(N)/MVP-16C/MVP-32C signal management platform supports up to 32
scenes. If the current status of corresponding video input and output is to be preserved.
The capacitive touch in Video Switcher to <Save scene>+<Storage unit number> . For
example, to save input and output corresponding state 02 unit, <SAVE SCENE> +
<Scene 02>.
To invoke the saved scene, <CALL SCENE> + < Storage unit number>, For example, to
invoke the saved in 02 storage unit
1.4 EDID management

MVP-8C(N)/MVP-16C/MVP-32C signal management platform provide EDID read, reset,
storage, and other functions, the latest generation of signal management platform in the
update EDID would be more convenient and quick operation.
Each output channel will automatically identify the EDID of display devices, and will
feedback the EDID information to the touch screen output channel. Update EDID to input
port, also displays the same input EDID information. To updates the input port EDID from
output port. Select EDID switcher, click on the output channel and click need update EDID
input channel. Input channel EDID information same as the output channel identification
EDID. For example, Output channel 1 EDID information update to the input channel 1, 2, 3.
Select EXTERNAL EDID and then <OUT1> + <IN1> + <IN2> + <IN3>.
MVP-8C(N)/MVP-16C/MVP-32C support store 16 group EDID, Save EDID may achieve
at any time. To update the data to input channel .In an INTERNALEDID state, select save
EDID, then click on the corresponding input channel

If you need to have one output channel EDID information stored. In the SAVE EDID state,
select output and click save the location of the EDID.
1.5 Internet network communication Settings
Enter to the system Settings menu, select NETWORK menu options. Into the next sub
menu view or change the IP address, protocol, port, network setting is shown in the figure.

1.6 RS232 setting
RS232 communication parameters including Baud Rate, Data Bits, Stop bit, Parity. If you
want to change these parameters can click on the System into the System Settings menu,
select UART to enter RS232 setting.
1.7 Version information query
In the system Settings of the optionsABOUT HOST users can see the Main control board
(Main - Version), and the exchange board (Back - Version), and the Version information
etc.

1.8 system reset
MVP-8C(N)/MVP-16C/MVP-32C signal management platform support system restore
factory settings, and setup system. Click RESET interface, click on ENTER to reset the
product with factory settings.
2、RS232 and LAN control command
When MVP-8C(N)/MVP-16C/MVP-32C signal management platform can be controlled by the
external control devices/system cotroller through RS232 connection, TCP/IP telnet. RS232
default settings are: Baud 115200bps, 8 data bits, 1 stop bit, no parity.
Nu
mb
er
序
号
Actio
n
执行
Basic
ASCII
String
基本的
ASCII 字
符串
Variables
变量
Exampl
e
Settin
gs
示例设
置
Example String
字符串示例
Example
Response
示例响应
1
Video
switch
input
into
multip
le or
single
channe
l
output
>Catob,c
<CR>
a = input(1 ~
matrix max)
b c = output(1 ~
matrix max or ALL)
Switch
input 1
to
output
2,3
>C1to2,3<CR>
<C1to2,3<CR>
2
Video
switch
corres
pondin
g
>CRa:b,c
:d<CR>
a c = output(1 ~
matrix max)
b d = input(1 ~
matrix max)
Switch
input 1
to
output
3
>CR1:3,2:4<CR>
<CR1:3,2:4<C
R>

relati
ons
betwee
n
Switch
input 2
to
output
4
3
Video
select
input(
starti
ng up
Off by
defaul
t)
>CSWI:a<
CR>
a = input(1 ~
matrix max)
Select
input 2
>CSWI:2<CR>
<CSWI:2<CR>
4
Video
switch
to the
output
>CSWO:a<
CR>
a = output(1 ~
matrix max)
Select
input
the
switch
to the
output
2,3
>CSWO:2,3<CR>
<CSWO:2,3<CR
>
5
Video
query
corres
pondin
g
relati
ons
betwee
n
#CR<CR>
NULL
Query
corres
pondin
g
relati
ons
betwee
n
#CR<CR>
<CR1:3,2:4<C
R>
6
Audio
switch
input
into
multip
le or
single
channe
l
output
>Tatob,c
<CR>
a = input(1 ~
matrix max) + A/B
b c = output(1 ~
matrix max or ALL)
+ A/B
Note:A=Internal
audio B=External
audio
IN1
video
intern
al
embed
audio
switch
OUT2
intern
al or
extern
al
>T1Ato2A,2B<CR>
<T1Ato2A,2B<
CR>

7
Audio
switch
corres
pondin
g
relati
ons
betwee
n
>TRa:b,c
:d<CR>
a c = output(1 ~
matrix max) + A/B
b d = input(1 ~
matrix max or ALL)
+ A/B
Note:A=Internal
audio B=External
audio
Switch
input
1A to
output
2A
Switch
input
1B to
output
2B
>TR1A:2A,1B:2B<
CR>
<TR1A:2A,1B:
2B<CR>
8
Audio
select
input(
starti
ng up
Off by
defaul
t)
>TSWI:a<
CR>
a = input(1 ~
matrix max) + A/B
Note:A=Internal
audio B=External
audio
Select
input
2A
>TSWI:2A<CR>
<TSWI:2<CR>
9
Audio
switch
to the
output
>TSWO:a<
CR>
a = output(1 ~
matrix max) + A/B
Note:A=Internal
audio B=External
audio
Select
input
the
switch
to the
output
3A,3B
>TSWO:3A,3B<CR>
<TSWO:2,3<CR
>
10
Audio
query
corres
pondin
g
relati
ons
betwee
n
#TR<CR>
NULL
Query
corres
pondin
g
relati
ons
betwee
n
#TR<CR>
<TR1A:3A,2A:
4B<CR>
11
Save
the
scene
>Sa<CR>
a = Scene location
（1~32max）
Save
the
curren
t state
to 10
>S10<CR>
<CR1:3,2:4,.
..<CR>
12
Call
scenar
io
switch
>Ra<CR>
a = Scene location
（1~32max）
Call
scenar
io 10
>R10<CR>
<CR1:3,2:4,.
..<CR>

13
Switch
the
audio
and
video
synchr
onizat
ion
>SYNC:a<
CR>
a = 0:no
synchronous
1:synchronous
Switch
synchr
onous
>SYNC:1<CR>
<SYNC:1<CR>
14
Query
the
audio
and
video
synchr
onizat
ion
#SYNC<CR
>
NULL
Query
synchr
onous
#SYNC<CR>
<SYNC:1<CR>
15
Set
the
scene
name
>SNAMEa:
b<CR>
a = Scene location
（1~32max）
b = scene
name(15English
char)
Set the
scene1
0 name
"Meeti
ng"
>SNAME10:Meetin
g<CR>
<SNAME10:Mee
ting<CR>
16
Query
the
scene
name
#SNAMEa<
CR>
a = Scene location
（1~32max）
Query
the
scene1
0 name
#SNAME10<CR>
<SNAME10:Mee
ting<CR>
17
Set
the
scene
use
>SUSEa:b
<CR>
a = Scene location
（1~32max）
b = scene use(0=no
1=yes)
Set the
scene1
0 use
>SUSE10:1<CR>
<SUSE10:1<CR
>
18
Query
the
scene
use
#SUSEa<C
R>
a = Scene location
（1~32max）
Query
the
scene1
0 use
#SUSE10<CR>
<SUSE10:1<CR
>
19
Uart
switch
>CUARTat
ob,c<CR>
a = RX(1 ~ matrix
max)
b c = TX(1 ~ matrix
max or ALL)
Uart
switch
rx1 to
tx1\2
>CUART1to1,2<CR
>
<CUART1to1,2
<CR>

20
Query
the
all
uart
switch
state
#CRUART<
CR>
NULL
Query
the all
uart
switch
state
#CRUART<CR>
<CRUART1:1,2
:1,...<CR>
21
Set
the IP
addres
s
>IP:a.b.
c.d<CR>
a b c d =
address(0~255)
set IP
addres
s
192.16
8.2.22
9
>IP:192.168.2.2
29<CR>
<IP:192.168.
2.229<CR>
22
Set
the
Subnet
>SUBNET:
a.b.c.d<
CR>
a b c d =
address(0~255)
set
Subnet
255.25
5.255.
0
>SUBNET:255.255
.255.0<CR>
<SUBNET:255.
255.255.0<CR
>
23
Set
the
Gatewa
y
>GATEWAY
:a.b.c.d
<CR>
a b c d =
address(0~255)
set
Gatewa
y
255.25
5.255.
0
>GATEWAY:192.16
8.2.1<CR>
<GATEWAY:192
.168.2.1<CR>
24
Set
the
Socket
Server
port
>PORT:a<
CR>
a = Server port
Set the
Socket
Server
port
1001
>PORT:1001<CR>
<PORT:1001<C
R>
25
Set
Networ
k DHCP
>DHCP:a<
CR>
1= 0:no 1:yes
Set
Networ
k DHCP
>DHCP:1<CR>
<DHCP:1<CR>
26
Query
the
networ
k
inform
ation
#NETWORK
<CR>
NULL
Query
the
networ
k
inform
ation
#NETWORK<CR>
<IP:192.168.
2.229<CR>
<SUBNET:255.
255.255.0<CR
>
<GATEWAY:192
.168.2.1<CR>
<PORT:1001<C
R>

27
Set
the
serial
port
>UART:a,
b,c,d<CR
>
a = Baud
Rate(115200 38400
19200 9600)
b = Data bits(8 9)
c = Stop bits(1 1.5
2)
d = Parity
bits(None Odd
Even)
Set the
serial
9600,8
,1,Non
e
>UART:9600,8,1,
None<CR>
<UART:9600,8
,1,None<CR>
28
Query
the
serial
port
#UART<CR
>
NULL
Query
the
serial
port
#UART<CR>
<UART:9600,8
,1,None<CR>
29
Comman
d can
make
>CMDEN:a
<CR>
a = 0:no make
1:make
Set
comman
d can
make
>CMDEN:1<CR>
<CMDEN:1<CR>
30
Query
Comman
d can
make
#CMDEN<C
R>
NULL
Query
comman
d can
make
#CMDEN<CR>
<CMDEN:1<CR>
31
Comman
d
notice
sound
>CSOUND:
a<CR>
a = 0:no sound
1:sound
Set
comman
d
notice
sound
>CSOUND:1<CR>
<CSOUND:1<CR
>
32
Query
comman
d
notice
sound
#CSOUND<
CR>
NULL
Query
comman
d
notice
sound
#CSOUND<CR>
<CSOUND:1<CR
>
33
switch
EDID
output
to
input
>EDIDato
b<CR>
a = output(1 ~
matrix max)
b = input(1 ~
matrix max or ALL)
Switch
output
1 to
input 2
>EDID1to2<CR>
<EDID1to2<CR
>
34
switch
EDID
system
to
input
>SYSEato
b<CR>
a = system(1 ~
16)
b = input(1 ~
matrix max or ALL)
Switch
system
1 to
input 2
>SYSE1to2<CR>
<SYSE1to2<CR
>

35
switch
EDID
output
to
system
>SEDIDat
ob<CR>
a = output(1 ~
matrix max)
b = system(1 ~
16)
Switch
output
1 to
system
2
>SEDID1to2<CR>
<SEDID1to2<C
R>
36
Set
the
HDMI
output
format
>HDMODE:
a,b<CR>
a = output(1 ~
matrix max)
b = 0:DVI 1:HDMI
Output
:2 set
HDMI
format
>HDMODE:2,1<CR>
<HDMODE:2,1<
CR>
37
Set
card
the
hdcp
switch
>HDCP:a,
b<CR>
a = port(1 ~
matrix max)
b = 0:OFF 1:ON
Set
port:2
the
hdcp
off
>HDCP:2,0<CR>
<HDCP:2,0<CR
>
38
Daught
er
card
power
manage
ment
>CPOWER:
a,b<CR>
a = port(1 ~
matrix max)
b = 0:OFF 1:ON
Close
port 2
power
supply
>CPOWER:2,0<CR>
<CPOWER:2,0<
CR>
39
The
query
card
power
state
#CPOWER:
a<CR>
a = port(1 ~
matrix max)
Query
port 2
power
state
#CPOWER:2<CR>
<CPOWER:2,0<
CR>
40
Set
manage
ment
user
name
and
passwo
rd
>MUNP:a,
b<CR>
a = name(15 the
English
characters)
b = password(15
the English
characters)
ser
user:M
ain
passwo
rd:123
456
>MUNP:Main,1234
56<CR>
<MUNP:Main,1
23456<CR>
41
Query
manage
ment
user
name
and
passwo
rd
#MUNP<CR
>
NULL
Query
manage
ment
user
name
and
passwo
rd
#MUNP<CR>
<MUNP:Main,1
23456<CR>

42
Send
comman
ds to
contro
l card
>COMa<CR
>
a = control card
command
send
"-TEST
"
string
>COM-TEST<CR>
NULL(you
don't online
returns the
ERROR)
43
Query
whethe
r
centra
l
online
#COM<CR>
NULL
Query
whethe
r
centra
l
online
#COM<CR>
<COM:1<CR>
44
To TCP
Socket
server
send
data
>SEND-SS
:a:b,c<C
R>
a = IP
b = Server port
c = data
To
192.16
8.88.1
00：
1001
send
“TEST
”
>SEND-SS:192.16
8.88.100:1001,T
EST<CR>
>SEND-SS:4<C
R>
45
Query
status
inform
ation
Return
ed in
JSON
format
#JSON:a,
b<CR>
a =
("video","scene",
"system","weburl"
,"cont")
b = mark(Status
update version，0 =
Request all data)
Query
the
state
of the
video
>JSON:video,0<C
R>
{
"system":
{
"run": "Run
000:01:15",
"temp":
"20~35",
"ip":
"192.168.88.
151:8020",
"wcolor":
"#66ff00",
"mark": 55,
"ahpd": 1,
"uhpd": 1,
"lang": 1,

"update":
true
},
.....
}
46
Set
the
system
langua
ge
>LANG:a<
CR>
a = 0：English 1：
Chinese
Set the
system
langua
ge is
Chines
e
>LANG:1<CR>
<LANG:1<CR>
47
Query
system
langua
ge
#LANG<CR
>
NULL
Query
system
langua
ge
#LANG<CR>
<LANG:1<CR>
48
Restar
t the
system
>SOF-RES
TART<CR>
NULL
Restar
t the
system
>SOF-RESTART<CR
>
<SOF-RESTART
<CR>
49
Restor
e the
factor
y
Settin
gs
>SYS-RES
ET<CR>
NULL
Restor
e the
factor
y
Settin
gs
>SYS-RESET<CR>
<SYS-RESET<C
R>
50
Query
all
the
daught
er
card
types
#RCID<CR
>
NULL(return data
reference link)
Query
all the
daught
er card
types
#RCID<CR>
<RCID:1:I1,2
:N/A...<CR>
51
Query
main
softwa
re
versio
n
#SVER<CR
>
NULL
Query
main
softwa
re
versio
n
#SVER<CR>
<SVER:1.0.0<
CR>

52
Query
hardwa
re
versio
n
#HVER<CR
>
NULL
Query
hardwa
re
versio
n
#HVER<CR>
<HVER:1.0.0<
CR>
53
Query
back
softwa
re
versio
n
#BVER<CR
>
NULL
Query
back
softwa
re
versio
n
#BVER<CR>
<BVER:1.0.0<
CR>
54
Query
matrix
type
#M0<CR>
NULL
Query
matrix
type
#M0<CR>
<MVP-8C(N)/M
VP-16C/MVP-3
2C<CR>
55
Query
instru
ction
set
head
#CMD<CR>
NULL
Query
instru
ction
set
head
#CMD<CR>
...
Update time:2017-1-17
> - Command, # - Query, < - Response
<CR> = 0x0D Hex / 13 Decimal
Note: The default communication settings are 115200 8N1 None. IP
address:192.168.88.229 Socket Server port:1001
3、Web management
MVP-8C(N)/MVP-16C/MVP-32C signal management platform support web server
management, write in the IP address of the MVP-8C(N)/MVP-16C/MVP-32C in the
browser, and write in user name and password, then login to the web management
interface.

NOTE:
When LAN ports connection if the direct connect. Need to set equipment IP network
segment and MVP-8C(N)/MVP-16C/MVP-32C in the same network segment.
The default user and password are user and 123456.
The factory default Settings segment for 192.168.88.229
3.1 WEB management option
Enter into WEB management option can choose video management, audio management,
EDID management, scene calls, system Settings.
(1)、Video switch: switch input channel video signal to output channel, click on the input
channel selection switch output channel or click All switch. For example, input 1 to all the
output channel. Click input 1 and all switch, upper left corner of the output boards display
NI4 channel, means they have fourth input signal switching to all outputs.