Cura1 2701 User manual

Tone Volume
Decrease / Increase
Delay
LoHi
Scale
Adjust alarm tone,
volume & delay settings.
Alarm
Reset
Button
Optional Nurse
Call Cable.
Optional 6 Vdc
power supply.
Caregiver Reset
Key option select
(Disables Alarm
Reset button
when on.)
Monitor auto-mutes
when connected to
a nurse call system
and volume is set to
minimum.
Tone
LOHI
Scale
Volume
Decrease / Increase
Delay
300mA
MAX
Reset
Button
ON
Caregiver
Key
ON
Falls.Monitor
Reset
Input
Lost
Low
Battery
Pad
Wetness
Change
Pad
Pause
Caregiver Reset Key
application point.
Caregiver Reset Key
(Resets the Monitor
after an alarm.)
Pad light will blink
when pad is in use.
Change Pad light will
illuminate & Monitor
will beep when SafeTime
Bed or Chair Pad expires.
2701 - Standard Falls Monitor
with SafeTime
UM-035e
All our products are supplied with a full warranty and are guaranteed
to be free from defects in material and workmanship.
Compatible & Optional Accessories
All Premium, Safetime and Universal pads and mats. (Universal when
using USB to RJ10 break cord).
3504 ActiveCare Bracket, 2406 Plug Pack 6V Power Adaptor, 2642
Caregiver Reset Key, 2636 Easy Release Seatbelt, 2742 Soft Monitor
Cover, 2699 Fixing Strap.
Nurse Call Cables: 2643, 2646, 2460, 2461, 2493
cura1
10 Gray Street, Kilkenny South Australia 5009
1300-12-CARE (2273)
www.cura1.com
3 X AA
Batteries
QuickStart
User Guide
2701 Standard
Falls Monitor with
Safetime
2742 Soft
Monitor
Cover
2699
Fixing
Strap
2642
Caregiver
Reset Key
NO / NC
(Normally Open /
Normally Closed)
selector for
Nurse Call
Systems.

Test Falls Monitor prior
to every use.
12
QUICK START GUIDE
2701 - Standard Falls Monitor with Safetime
3
Tone Volume
Decrease / Increase
Delay
LoHi
Scale
Back View
Insert 3 X AA alkaline
batteries into battery
compartment.
Bed / Chair Pad
or Floor Mat
Cable
Strain Relief.
Bottom View
Connection to
Bed / Chair Pad
or Floor Mat.
Compatible with:
• Premium Chair / Bed Pads & Mats.
• SafeTime Chair / Bed Pads.
• Universal Chair / Bed Pads & Mats
(when using USB to RJ10 break cord)
Premium floor mat is placed on floor in
doorway or beside the bed.
Mattress
Bed Pad
Bottom
Sheet
Premium bed pad is placed on top of
the mattress, underneath bedding.
Step
Insert 3 x AA alkaline batteries. (Do not use rechargable
batteries.)
Step
Place bed pad on mattress or position mat on floor.
Step
Connect Pad or Floor Mat to Monitor
& test prior to using.
Use screwdriver
(accepts both Phillips
or flat head) to undo
screw & slide battery
cover up to open.