Current Daintree ZBT-S1AWH User manual

LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject
to change without notice. All values are design or typical values when measured under laboratory
conditions.
Page 1 of 3
(Rev 06/15/23)
CTRL036-Current-Daintree-LED-EZ Connect-Wall-Switch-Spec Sheet
The Self-Powered Wireless Rocker Switch
(ZBT-S1AWH) is a wireless transmitter that
communicates with Daintree EZ Connect sensors. The
switch uses battery-free, energy harvesting technology.
Every time the switch is pressed a micro-generator
produces a small electrical current that powers a built-in
transmitter. This transmitter sends wireless radio signals
that are used to remotely control a compatible system.
For application spaces in need of a system that is
simple, easy to install, and code complaint, Current
offers Daintree EZ Connect, our mobile app based
wireless controls system that provides zonal control
and commissioning of lighting systems. The Daintree
EZ Connect mobile app and integrated sensors allow
customers to zone lighting xtures. This simple tool can
dramatically decrease the installation time and expertise
required to commission a room-based lighting controls
system for deployments of all sizes and complexities.
The app is available for download on the iOS store.
Project Name
Date Type
Catalog Number
Description
Compatible with:
Ordering Information
Daintree®Wireless Controls
Self-Powered Wireless Rocker Switch
4.50 2.80
2.75 0.25 0.37
0.32
1.76
Product Code Product Description
ZBT-S1AWH Single Rocker Self-Powered
ZigBee Switch
Product Dimensions
• ZigBee Green Power (included in ZigBee 3.0)
• Lumination LED Luminaires integrated with Daintree
EZ Connect controls
• WIT100 sensors
• LCA kit can be added to any 0-10V luminaire to enable
Daintree EZ Connect controls.
• Easy Deployment: Daintree EZ Connect mobile
app simplies and reduces the installation process,
minimizing disruption to enterprise operations.
• Zoned Communication: Fixtures can be zoned and
the sensors talk to each other to react in concert
with each other to occupancy, daylight and wall
controls.
• Simplicity: Integration with xtures reduces the
amount of devices that need to be installed in a
room.
• Room Based Control: Customize the lighting
parameters to the task that is being performed in
the application space.
• Code Compliant: Integrated wireless sensors offer
daylight harvesting and granular lighting controls.

LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject
to change without notice. All values are design or typical values when measured under laboratory
conditions.
Page 2 of 3
(Rev 06/15/23)
CTRL036-Current-Daintree-LED-EZ Connect-Wall-Switch-Spec Sheet
Mounting
Commissioning
Commission (link) the switch to the compatible system
before mounting.
The light switch is compatible with standard decorator style
faceplates.
A faceplate is included.
For surface mount, attach included backplate to the wall
using screws or adhesive.
For ush mount, mount the switch without the backplate
into either a standard electrical switch box or a low voltage
mounting bracket using included screws.
Surface Mount
Flush Mount
PART 1
Activate commissioning (or linking) mode for a system
compatible with the switch.
From the Daintree EZ Connect App, tap to connect to the
room and navigate to the “Switches” tab. Switches should
be commissioned no more than 10 ft (3 m) from where they
are intended to be installed. Tap the + icon to begin
adding a new switch. Follow the on-screen instructions.
For more information download the
Daintree EZ Connect User Guide.
PART 2
Put the switch into commissioning mode.
Put the switch into commissioning mode.
To enter commissioning mode, start by selecting one
button on the switch. (Use the same button for the
entire sequence. Pressing any other button will exit the
commissioning mode.)
Next, execute the following long-short-long sequence:
1. Press and hold the selected button for more than 7
seconds before releasing it.
2. Press the selected button quickly (hold for less than 2
seconds).
3. Press and hold the selected button again for more
than 7 seconds before releasing it.
The switch has now entered commissioning mode.
PART 3
Linking the switch to the compatible system.
A radio signal needs to be sent from the switch to the
compatible system on the correct ZigBee channel.
The system uses one of sixteen possible channels,
automatically set by the system. Using the switch, a signal
will be sent on each channel until the channel used by the
compatible system is found.
Upon entering commissioning mode, the switch sends
a signal on the currently selected channel. The signal is
sent on the default channel 15, unless the switch had been
put on another channel previously. (This allows linking
additional devices without changing the currently used
radio channel.)
Daintree® |Single Rocker Self-Powered ZigBee®Switch
Zonal Control & Commissioning
Current offers Daintree EZ Connect,
our mobile app based wireless controls
system that provides zonal control and
commissioning of lighting systems. The
app is available for download on the
iOS store.

LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject
to change without notice. All values are design or typical values when measured under laboratory
conditions.
Page 3 of 3
(Rev 06/15/23)
CTRL036-Current-Daintree-LED-EZ Connect-Wall-Switch-Spec Sheet
Commissioning (cont.)
Here is a chart of the ZigBee channels and the
corresponding radio frequencies (in MHz).
When the switch is on the correct channel,
the Daintree EZ Connect App will provide a
conrmation indication.
Specications
ZBT-S1AWH Daintree EZ Connect Self-Powered Wireless
Rocker Switch
Range
(to nearest neighboring
Daintree EZ Connect
device)
Up to 30 ft or 10 m(typical).
Range can extend up to 100ft or 30 m
Frequency 4°F to +149°F (-20°C to +65°C) Dry location (or
inside Listed non-metallic waterproof enclosure)
Buttons Green LED (power)
Green LED (joined network)
Red LED (error state)
Dimensions Snap-in 1/2” nipple for junction box mount Screw
tab and optional mounting bracket
Operating
Temperature
-13º to +149º F (-25º to +65º C)
Radio
Certications
Certied according to FCC, IC and CE regulations
Addressing Factory Set Unique ID
Channel ID Lower
Frequency
Center
Frequency
Upper
Frequency
11 2404 2405 2406
12 2409 2410 2411
13 2414 2415 2516
14 2419 2420 2421
15* 2424 2425 2426
16 2429 2430 2431
17 2434 2435 2436
18 2439 2440 2441
19 2444 2445 2446
20 2449 2450 2451
21 2454 2455 2456
22 2459 2460 2461
23 2464 2465 2466
24 2469 2479 2471
25 2474 2475 2476
26 2479 2480 2481
Daintree® |Single Rocker Self-Powered ZigBee®Switch
*Switches should be commissioned no more than 10 feet (3 m) from their
intended installation location.
Contains FCC ID: SVZ-PTM215Z
Contains IC: 5713A-PTM215Z
The enclosed device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (i.) this device may not cause
harmful interference and (ii.) this device must accept any interference
received, including interference that may cause undesired operation.
Always follow local electrical codes when installing this device. Installation
should be performed by a qualied electrician.
This device or certain aspects thereof is protected by at least one of the
U.S. or international patent or has at least one such patent application
pending.
If the switch was already operating on channel 15 (default condition)
then the radio channel will remain unchanged. This ensures that the
switch will always use channel 15 as the starting point for the channel
adjustment.
*Daintree EZ Connect Preprogrammed to Channel ID 15
Cycle through the sixteen channels
To change the switch’s channel, short press the selected
switch button (less than 7 seconds) once after entering
commissioning mode. This will reset the channel used by
the switch to channel 15.
Short press the selected button (less than 7 seconds)
again to move to the next channel.
For each such button press, the switch transmits on the
next channel. If channel 26 has been reached then channel
15 will be used next.