Custom SLR Gliding Split Strap User manual

Gliding Split Strap for Cameras
The Gliding Camera Split Strap comes with everything you need to attach it to your C-
Loop™. The strap is also compatible with the existing hardware from most sling
systems.
Here is hardware that is included.
1.Attach both connector loops to the C-Loop™.
!CustomSLR.com

2. Slide the connector loops on to the quick attach buckle bar and press firmly to close.
Note: The quick attach buckle opens by pressing the bar down and pressing the end
outwards.
3. Mount the C-Loop™on to your camera.
!CustomSLR.com

4. Adjust the length of the strap as needed. It maybe necessary to cut the length of the
webbing if it is too long. To do so use a pair of scissors and burn the ends with a flame
to prevent fraying.
5. Attach the camera to the strap by snapping the connectors together.
Adjust the travel of the camera by adjusting the stopper. The additional stopper can be
installed to limit travel when leaning down or crouching.
Note: When reassembling the strap remember to insert the strap into the second bar of
the male buckle.
!CustomSLR.com