Cyber Power BPSE24V40ART2U User manual

User’s Manual
BPSE24V40ART2U
BPSE48V40ART2U
BPSE72V40ART2U
Cyber Power Systems, Inc.
www.cyberpower.com K01-C000610-00

TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ..............................................................................................4
UNPACKING ..........................................................................................................................................5
OVERVIEW ...........................................................................................................................................6
FRONT/REAR PANEL DESCRIPTION ................................................................................................................6
HARDWARE INSTALLATION ..............................................................................................................7
RACKMOUNT INSTALLATION ............................................................................................................................... 7
VERTICAL/TOWER INSTALLATION ....................................................................................................................8
BATTERY INSTALLATION AND REPLACEMENT ...........................................................................................9
TECHNICAL SPECIFICATIONS ......................................................................................................... 10

4
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important instructions. Please read and follow all instructions
carefully during installation and operation of the unit. Read this manual thoroughly before
attempting to unpack, install, or operate the Battery modules.
CAUTION! The UPS unit must be connected to a grounded AC power outlet with fuse or
circuit breaker protection. The Battery modules grounded are through the UPS.
CAUTION! The battery can power hazardous components inside the unit, even when the AC
input power is disconnected.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area, free of conductive contaminants. (Please see specifications for
acceptable temperature and humidity range).
CAUTION! (No User Serviceable Parts): Risk of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION! (Non-Isolated Battery Supply): Risk of electric shock, battery circuit is not isolated
from AC power source; hazardous voltage may exist between battery terminals and ground.
Test before touching.
CAUTION! Wiring must be done by qualified personnel.
CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use
with or near aquariums. Condensation from the aquarium can come in contact with metal
electrical contacts and cause the machine to short out.
CAUTION! Do not dispose of batteries in fire as the battery may explode.
CAUTION! Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.
CAUTION! A battery can present a risk of electric shock and high short circuit current. The
following precaution should be observed when working on batteries.
• Remove watches, rings or other metal objects.
• Use tools with insulated handles.
CAUTION! Make sure everything is turned off and disconnected completely before
conducting any maintenance, repairs or shipment.
CAUTION! Connect the Protection Earth (PE) safety conductor before any other cables are
connected.
DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR
NEAR A STRONG HEAT SOURCE!
SERVICING OF BATTERIES SHOULD BE PERFORMED OR SUPERVISED BY PERSONNEL
KNOWLEDGE OF BATTERIES AND THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED
PERSONNEL AWAY FROM BATTERIES!

5
UNPACKING
Battery module
PowerPanel® Business software is available on our website.
Please visit www.cyberpower.com and go to the Software Section for free download.
Rackmount rails (2)
Screw hole dust
covers (8)
Rackmount ears
(Stands) (2)
Plastic washers (8)
User’s manual Battery cable Flat head screws:
M4X8L (8)
Pan head screws:
M5X12L (4)

6
OVERVIEW
1. Input Connector
Use this input connector to connect the Battery module to the Power module or to the next
Battery module.
2. On-board Replaceable Fuse Cover
Replaceable fuse is accessible from the rear panel. It must be done by qualified personnel.
3. Output Connector
Use this output connector to daisy chain the next Battery module. Remove the connector
cover for access.
4. Automatic Detection of Extended Battery Module Connector
Connect to UPS for automatic detection of Battery modules.
CONNECTION 1:
POWER MODULE WITH ONE BATTERY MODULE
Use the battery cable of the Battery module to connect the Battery module to the Power module.
CONNECTION 2:
POWER MODULE WITH MULTIPLE BATTERY MODULES
Step 1: Connect the first Battery module to the Power module via battery cable.
Step 2: Use the battery cable to connect the second Battery module to the first Battery module.
FRONT/REAR PANEL DESCRIPTION
BPSE24V40ART2U/BPSE48V40ART2U/BPSE72V40ART2U
12 4 3

7
HARDWARE INSTALLATION
HARDWARE INSTALLATION
These Battery modules can be mounted in a rackmount or vertical tower orientation. This
versatility is especially important to growing organizations with changing needs that value
having the option to position a Battery module on a floor or in a rackmount system. Please
follow the instructions below for the respective mounting methods.
CAUTION! To prevent the risk of fire or electric shock, only use the supplied hardware to
attach the mounting brackets.
RACKMOUNT INSTALLATION
Step 1: Rackmount ears installation
Attach the two rackmount ears to Battery module using the provided screws M4X8L*8pcs.
Step 2: Rackmount rails installation
(1) The rails adjust to mount in 48-cm (19-inch) panel racks from 46.4 to 73.8cm (18.3 to 29
inches) deep. Select the proper holes in the rack for positioning the Battery module in the
rack. The rails take up position 1 through position 3.
(2) Attach the rackmount rail to your rack with two M5X12L screws, two plastic washers, and
two M5 nuts at the front of the rack. (Located in position 1 & position 3; It can also be located
in position 1 & position 2 or position 2 & position 3 alternatively). Do not tighten the screws.
Adjust the rail length on the rail assembly of your rack. Secure the rail to the rear of the rack
with two M5X12L screws, two plastic washers, and two M5 nuts. Tighten all screws at the
front and rear of the rail. Once completed, perform the same steps for assembling the other
rackmount rail.
3U
2U
1U
position 9
position 8
position 7
position 6
position 5
position 4
position 3
position 2
position 1
position 3
position 1
(1) (2)

8
HARDWARE INSTALLATION
Step 3: Install the Battery module on the rack
Place the Battery module onto the rackmount rails with the front of the unit facing you. Secure
the Battery module to your rack with four M5X12L screws at the front of the rack. (Located in
position 2 & position 5).
VERTICAL/TOWER INSTALLATION
Step 1: Attach the base stands
Tighten the screws (M5X12*4pcs) of the base stands (rackmount ears) onto the bottom of the
Battery module.
Step 2: Attach dust covers
Insert dust covers into the rackmount ear screw holes that are not being used.
position 1
position 3
position 2
position 5
1 2

9
HARDWARE INSTALLATION
BATTERY INSTALLATION AND REPLACEMENT
Step 1: Unscrew the top cover and separate the top cover from the Battery module.
Step 2: Unscrew the steel bars and separate the steel bars from the Battery module.
Step 3: Remove the battery pack from the Battery module.
Step 4: Open the battery pack and change the batteries.
Step 5: Put the battery pack into the Battery module. Re-install the steel bars and top cover.
5
1 2
3 4

10
TECHNICAL SPECIFICATIONS
Models BPSE24V40ART2U BPSE48V40ART2U BPSE72V40ART2U
Battery
Specifications 12V x 2pcs x 2 sets 12V x 4pcs x 2 sets 12V x 6pcs x 2 sets
Rated Battery Voltage 24V 48V 72V
Overload Protection Fuse
Physical
Dimension (WxHxD)mm 438 x 88 x 430 438 x 88 x 430 438 x 88 x 610
Net Weight (kg) 16.24 26.74 38.75
Environment
Operating Temperature 32°F to 104°F ( 0°C to 40°C)
Operating Relative Humidity 20 to 90% Non-Condensing

Cyber Power Systems, Inc.
www.cyberpower.com
11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan
Entire contents copyright © 2019 Cyber Power Systems, Inc. All rights reserved. Reproduction in whole or
in part without permission is prohibited. PowerPanel® Business and PowerPanel® Personal are trademarks of
Cyber Power Systems, Inc.