CyberLink External USB Audio Station Xonar U1 Instruction and safety manual

DVD Playback over DH/DVS/DDL/Multiple
Analog Speakers
Windows XP
Dolby Headphone (Virtualized 5.1 surround sounds over stereo
headphone)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 speaker in Speaker Environment
3. Select No Effect in Output Mode
4. Press OK
5. Open Xonar Audio Center
6. Select Headphone in Analog Out
7. Check “Dolby Headphone”

Dolby Virtual Speaker (Virtualized 5.1 surround sounds over stereo
speakers)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 Speaker in Speaker Environment
3. Select No Effect in Output Mode
4. Press OK
5. Open Xonar Audio Center
6. Select 2 Speakers in Analog Out

7. Check “Dolby Virtual Speaker”
DVD playback by SPDIF (Dolby Digital/DTS digital audio
pass-through)
1. Open PowerDVDÎConfigurationÎAudio
2. Select Use SPDIF in Speaker Environment
3. Press OK
4. Open Xonar Audio Center
5. Enable “SPDIF Out”

DVD playback by SPDIF (Add Sound effects w/ DDL encoding)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 speaker in Speaker Environment
3. Select No Effect in Output Mode
4. Press OK
5. Open Xonar Audio Center
6. Enable “SPDIF Out”
7. Select Dolby Digital Live in SPDIF Out

8. In this mode, you are able to adjust the DVD sound volume, your multi-speaker
placement and surround soundfield virtually by 7.1 Virtual Speaker Shifter. You
can also add environmental reverbs or EQ effect into the movie surround sounds.
In a word, you can optimize the movies’sounds even over Dolby Digital output to
your home theater.
Windows Vista
Dolby Headphone (Virtualized 5.1 surround sounds over stereo
headphone)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 speaker in Speaker Environment
3. Select No Effect in Output Mode
4. Press OK

5. Open Xonar Audio Center
6. Select 6 Channels in Audio Channel
7. Select Headphone in Analog Out
8. Check “Dolby Headphone”
Dolby Virtual Speaker (Virtualized 5.1 surround sounds over stereo
speakers)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 Speaker in Speaker Environment

3. Select No Effect in Output Mode
4. Press OK
5. Open Xonar Audio Center
6. Select 6 Channels in Audio Channel
7. Select 2 Speakers in Analog Out
8. Check “Dolby Virtual Speaker”
DVD playback by SPDIF (Dolby Digital/DTS digital audio
pass-through)

1. Open PowerDVDÎConfigurationÎAudio
2. Select Use SPDIF in Speaker Environment
3. Press OK
4. Open Xonar Audio Center
5. Enable “SPDIF Out”
DVD playback by SPDIF (Add Sound effects w/ DDL encoding)
1. Open PowerDVDÎConfigurationÎAudio
2. Select 6 speaker in Speaker Environment

3. Select No Effect in Output Mode
4. Press OK
5. Open Xonar Audio Center
6. Select 6 Channels in Audio Channel
7. Enable “SPDIF Out”
8. Select Dolby Digital Live in SPDIF Out
9. In this mode, you are able to adjust the DVD sound volume, your multi-speaker
placement and surround soundfield virtually by 7.1 Virtual Speaker Shifter. You
can also add environmental reverbs or EQ effect into the movie surround sounds.
In a word, you can optimize the movies’sounds even over Dolby Digital output to
your home theater.